This machine has been sold.

2015 Caterpillar D6N XL



MACHINE SOLD


Altorfer Cat

https://www.altorfer.com


Contact: Wm. E. Musgrave

Click for Phone Number

Machine Info:

Hours:4154
Serial Number:PER00890
Stock Number:191U035
Machine Location:CEDAR RAPIDS, IA 52404

Description:

ACCUGRADE READYAIR CONDITIONERAIR SUSPENSION SEATAM FM RADIOANTI-THEFT SYSTEMAUXILIARY HYDRAULICSBLADE SHAKEBLADE, PATBLADE, SDIFF STEERDRAWBARENGINE ENCLOSURESEPA LABELEROPSLIGHTINGPILOT CONTROLPRODUCT LINKULTRA LOW SULFUR DIESEL FUELXL

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredNo
Cab or CanopyGood - No damage.
DecalsGood - Minor scratches/fading.
Draw BarFair - Damage to RH side draw bar frame, pull pin installed.
FendersGood - Straight, no damage.
Fuel TankGood
Grab IronsGood - All straight and secured.
HoodGood - Straight, no damage.
PaintGood - Good coverage, minor fading.
Sheet MetalGood
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood - Holding correctly.
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Current Parts ManualYes
Current Safety ManualYes
Air ConditionerGood - Cooling correctly.
Dash ConsoleGood - Good condition, no damage/cracks.
GaugesGood - All working.
Glass/MirrorsGood
HeaterGood - All fan speeds working correctly.
Interior LightsGood
Seat Cushion / Arm RestGood - Cloth seat, no damage.
SwitchesGood
Windshield WipersGood - All working.
ENGINE
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Oil Pressure (H/L/N) - Normal, 88 psi.
Air CleanersGood
Fuel Injection SystemGood - No leaks.
Operating Condition - ENGINEGood - Engine starts and runs correctly.
Turbocharger / BlowerGood - No leaks.
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Standard RadiatorYes
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood - No leaks/damage.
FanGood
HosesGood
RadiatorGood - Clean, no damage.
Water PumpGood - No leaks.
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidYes - No bottle installed.
AlternatorGood - Charging correctly.
Batteries / CablesGood - Clean, no corrosion.
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
Controls - TRANSMISSIONGood - No looseness.
Operating Condition - TRANSMISSIONGood - Machine drives and shifts through all gears correctly.
SealsGood - No visible leaks.
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood - Shifts correctly/smoothly.
Transmission - Reverse ShiftsGood - Shifts correctly/smoothly.
STEERING
Differential Steering ControlsGood - No looseness.
Steering Operating ConditionGood - Machine steers correctly, no abnormal noise.
BRAKE
Holding What Gear? - 2nd.
HYDRAULICS
Leaks - HYDRAULICSNo
Angle CylinderGood - Dry.
Control Linkage - HYDRAULICSGood - No looseness in pilot control.
Hose LinesGood - No leaks or damage.
Lift CylindersGood - Both are dry.
Overall Operating ConditionGood - Hydraulic functions operate correctly.
Tilt CylinderGood - Both are dry.
BLADE
Cutting Edge & BitsGood - 70% Remaining, edges have been flipped.
Face / MoldboardGood - 129” ARO XL blade, minor dents in outer edges.
KnuckleGood - Shims remaining.
PinsGood - Cylinder pins and bearings in GC, minimal wear.
UNDERCARRIAGE
Carrier Rollers - CAT, 353-8611.
Equalizer Bar - Fair, 1/8” movement in end pins.
Pivot Shaft - Good, no leaks.
Track Frame - LeftGood - No damage.
Track Frame - RightGood - No damage.
Carrier Rollers Front
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Segments
Track Roller 1
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
FINAL DRIVES
Notes - FINAL DRIVES - Oil levels are correct, oil looks clean.
Housings, LeftGood - No damage/leaks.
Housings, RightGood - No damage/leaks.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Inspected 9-30-19 at 3571 hrs.
comment 2 - Fresh 500 hr/PM2 service at 3572 hrs. New CAT track links installed at 3182 hrs.


Specs from the manufacturer:

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes24 in (60 cm)
Ground Clearance1 ft (0 m)
Height - Top of Cab10 ft (3 m)
Length - Track on Ground100 in (255 cm)
Length of Track on Ground9 ft (3 m)
Length w/o Blade12 ft (4 m)
Track Gauge6 ft (2 m)
Width Over Tracks8.2 ft in (21 cm)
Engine
Bore4 in (11 cm)
Displacement439 cu in (0 m)
Engine ModelCat 3126B DITAAC
Flywheel Power145 hp (108 kw)
MakeCat
ModelC7.1 ACERT
Net Power145 hp (108 kw)
Net Power - EU 80/1269145 hp (108 kw)
Net Power - ISO 9249145 hp (108 kw)
Net Power - SAE J1349143 hp (107 kw)
Number of Cylinders6
Power Measured @2,200 rpm
Stroke5 in (13 cm)
Operating Specifications
Alternator Supplied Amperage70 A
Cooling System Fluid Capacity9 gal (35 l)
Final Drives Fluid Capacity2 gal (7 l)
Fuel Capacity79 gal (299 l)
Hydraulic Fluid Capacity8 gal (30 l)
Operating Voltage12 V V
Operating Weight36,392 lbs (16,507 kg)
Ripper
Beam Cross Section216x254 mm 8.5x10.0 in
Number of Pockets3
Overall Beam Width87 in (220 cm)
Ripper TypeFixed Parallelogram
Weight - Each Additional Shank172 lbs (78 kg)
Service Refill Capacities
Cooling System11 gal (41 l)
Final Drive - Each2 gal (7 l)
Fuel Tank79 gal (299 l)
Hydraulic Tank8 gal (30 l)
Standard Blade
Capacity4 cu yds (3 m)
Height49 in (124 cm)
Width11 ft (3 m)
Transmission
1 Forward2 mph (3 kph)
1 Reverse3 mph (4 kph)
2 Forward4 mph (6 kph)
2 Reverse4 mph (7 kph)
3 Forward6 mph (10 kph)
3 Reverse7 mph (12 kph)
Max Speed - Forward6 mph (10 kph)
Max Speed - Reverse8 mph (12 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission Typepowershift
Undercarriage
Ground Contact Area4,882 cu in (0 m)
Ground Pressure7 psi
Grouser Height2 in (6 cm)
Number of Shoes per Side40
Number of Track Rollers per Side7
Standard Shoe Size24 in (61 cm)
Track Gauge6 ft (2 m)
Winch
Drum Diameter10 in (25 cm)
Drum Width12 in (32 cm)
Flange Diameter20 in (50 cm)
Oil Capacity20 gal (74 l)
Weight2,814 lbs (1,276 kg)
Winch and Bracket Length45 in (115 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

Altorfer Cat

Fax: 319-365-5639



Contact: Wm. E. Musgrave

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo