2006 Caterpillar D6R LGP III For Sale in Bardstown, KY



For Sale: $139,000.00 USD

This machine is available to rent.

Daily$850
Weekly$2500
Monthly$7500

Team Boone

https://www.teamboone.net


Contact: Mike Boone

Click for Phone Number

Machine Info:

Hours:7327
Serial Number:AAX01501
Stock Number:1030R
Machine Location:BARDSTOWN KY, 40004

Description:

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS!
NEW Undercarriage! Enclosed Cab w/ Heat & A/C! Caterpillar 3306 Engine, 199hp (148.4kw) @ 1,900RPM, Operating Weight: 45200lbs (20502.4kg), Fuel Capacity: 101.2gal, Carco 70A Winch, 3rd Valve, Sweeps, Diff Steer, 160" 6 Way Blade, 30" pads, Length: 17.9ft/in (5465mm), Width: 10.3ft/in (3140mm), Height: 10.6ft/in (3243mm), Ground Clearance: 1.4ft/in (433mm GPS READY!!!


Shipping not included. Call for Pricing!
Express Financing

Machine Details:

Condition
Used
Engine
horsepower185
ripper
ripperNo
AttaCHMENTS / WORK TOOLS
winchYes


Specs from the manufacturer:

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes23 in (58 cm)
Ground Clearance1 ft (0 m)
Length - Track on Ground105 in (266 cm)
Track Gauge6 ft (2 m)
Engine
Bore4 in (11 cm)
Displacement537 cu in (0 m)
Engine ModelCat C9 ACERT
Flywheel Power185 hp (138 kw)
Gross Power213 hp (159 kw)
Net Power - Caterpillar185 hp (138 kw)
Net Power - EU 80/1269185 hp (138 kw)
Net Power - ISO 9249185 hp (138 kw)
Net Power - SAE J1349183 hp (136 kw)
Stroke6 in (15 cm)
Hydraulic Controls - Pump
Ripper Cylinder Flow42 gal/min (160 l/min)
Tilt Cylinder Flow21 gal/min (80 l/min)
Ripper
Beam Cross Section216 x 254 mm 8.5 x 10 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole20 in (51 cm)
Maximum Penetration20 in (50 cm)
Maximum Penetration Force14,557 lbs (6,603 kg)
Number of Pockets3
Overall Beam Width87 in (221 cm)
Pry-Out Force20,137 lbs (9,134 kg)
Ripper TypeFixed Parallelogram
Weight - Each Additional Shank163 lbs (74 kg)
Weight - With One Shank3,606 lbs (1,636 kg)
Service Refill Capacities
Cooling System19 gal (70 l)
Engine Crankcase7 gal (28 l)
Final Drive - Each4 gal (14 l)
Fuel Tank112 gal (424 l)
Hydraulic Tank14 gal (51 l)
Pivot Shaft Compartment1 gal (5 l)
Power Train39 gal (146 l)
Roller Frames - Each7 gal (25 l)
Standards
BrakesBrakes meet criterion SAE J/ISO 10265 MAR99
Transmission
1 Forward2 mph (4 kph)
1 Reverse3 mph (5 kph)
2 Forward4 mph (7 kph)
2 Reverse5 mph (8 kph)
3 Forward7 mph (11 kph)
3 Reverse9 mph (15 kph)
Undercarriage
Ground Clearance1 ft (0 m)
Ground Pressure7 psi
Grouser Height3 in (7 cm)
Track Gauge7 ft (2 m)
Winch
Drum Capacity - 22 mm (0.88 in)290 ft in (737 cm)
Drum Capacity - 25 mm (1.0 in)220 ft (67 m)
Drum Capacity - 29 mm (1.13 in)220 ft in (559 cm)
Drum Diameter10 in (25 cm)
Drum Width13 in (33 cm)
Ferrule Size (O.D. Length)54 x 67 mm 2.10 x 2.63 in
Flange Diameter20 in (50 cm)
Increased Tractor Length - LGP16 in (40 cm)
Increased Tractor Length - STD20 in (52 cm)
Increased Tractor Length - XL/XW20 in (52 cm)
Oil Capacity18 gal (67 l)
Weight2,600 lbs (1,179 kg)
Winch and Bracket Length48 in (121 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

Team Boone

Fax: 502-348-4401



Contact: Mike Boone

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo