2007 Caterpillar D6T XW PAT For Sale in Cedar Rapids, IA



For Sale: $66,500.00 USD


Altorfer Cat

https://www.altorfer.com


Contact: Wm. E. Musgrave

Click for Phone Number

Machine Info:

Hours:15076
Serial Number:DJG00299
Stock Number:211U009
Machine Location:CEDAR RAPIDS IA, 52404

Description:

AM FM RADIOBLADE, PATBLADE, VDIFF STEERENGINE ENCLOSURESEROPSLIGHTINGAIR CONDITIONER

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenNo
Notes - GENERAL APPEARANCE - the machine is straight for 15,000 hrs.
BumperFair - it is bowed up in the middle.
Cab or CanopyFair - the top of the cab is missing all the paint and has low spots in it.
DecalsFair - the decals are scratched and fading.
Draw BarGood
FendersGood
Fuel TankGood
Grab IronsGood - the right side fender one is bent up a little.
HoodGood
Main Frame WeldsGood
PaintFair - the paint is scratched and starting to fade out.
Pre-Cleaner BowlGood
Sheet MetalGood
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Air ConditionerGood
Dash ConsoleGood
EMS Panel / WarningsGood
GaugesGood
Glass/MirrorsGood
HeaterGood
Interior LightsGood
Seat Cushion / Arm RestFair - the guides are getting pretty loose the seat moves around a lot.
SwitchesGood
Windshield WipersFair - left door wiper doesn’t work all the time, it starts and stops.
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksYes - Oil cooler leaking at mounting, and the huei pump leaking at the mount, cover on rear housing leaking.
Water in OilNo
Notes - ENGINE - the eng started and ran good, has a injector leaking off because it smoked and slobbered when started.
Oil Pressure (H/L/N) - 60 psi at low idle, 75 psi at high idle.
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemFair - it's getting worn, it takes 47% current to get it to stall speed on the injectors.
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMYes
Modular RadiatorYes
Belts / Pulleys - COOLING SYSTEMGood
CoolersFair - the hyd, and the a/c condenser has a lot of damaged fins and cores.
FanGood
HosesFair - the top and lower hoses are hard, and heater valve shut off leaking on the eng.
RadiatorFair - the cores are dirty and have a lot of rolled fins.
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidYes
AlternatorFair - the alternator light would come on and then go off, i'm guessing wiring issue.
Batteries / CablesGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONYes - starting to leak at the mounting and between the splits.
Transmission - NoisyNo
CaseFair - the case is leaking at the splits on the rear.
Controls - TRANSMISSIONGood
CoolerGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood
SealsGood
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Differential SteerGood
Differential Steering ControlsGood
Steering LinkageGood
Steering Operating ConditionGood
BRAKE
Holding What Gear? - 2nd
HYDRAULICS
Leaks - HYDRAULICSYes
Angle CylinderFair - both ends have movement.
Control Linkage - HYDRAULICSFair - the control valve has some play in it.
Hose LinesFair - the cylinder lines are getting torn and rough shape.
Lift CylindersFair - the mounts are loose.
Overall Operating ConditionGood
Tilt CylinderFair - the mounts are loose and bearings and pins loose.
BLADE
Cutting Edge & BitsFair - the edges are worn, but can be turned.
Face / MoldboardGood
PinsFair - all the pins are worn and the bores are loose.
Single TreeFair - the ball needs shimmed.
TrunnionsFair - the trunnions are worn, but can be shimmed.
UNDERCARRIAGE
Equalizer Bar - it has just a little movement on the roller frame bearings.
Notes - UNDERCARRIAGE - it has new rails and sprockets on both sides.
Track Frame - LeftGood
Track Frame - RightFair - the adjuster is leaking oil.
Idlers Front
Idlers Rear
Links
Track Roller 1
Track Roller 3
Track Roller 4
Track Roller 5
FINAL DRIVES
Notes - FINAL DRIVES - has some good size metal shavings on the left hand final.
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftFair - the left final plug had some good size metal shavings on it.
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - the black weight box, and the gps equipment are not coming with the machine.
comment 2 - clean it up and sell as is, very nice machine with new rails and sprockets, but does have 15,076 hrs on it.


Specs from the manufacturer:

Dimensions
Ground Clearance1 ft (0 m)
Height - Top of Cab11 ft (3 m)
Length of Track on Ground10 ft (3 m)
Length w/o Blade13 ft (4 m)
Width Over Tracks9.2 ft in (23 cm)
Engine
Displacement537 cu in (0 m)
Engine ModelC9 ACERT
Gross Power228 hp (170 kw)
MakeCat
ModelC9.3 ACERT
Net Power200 hp (149 kw)
Number of Cylinders6
Power Measured @1,850 rpm
Hydraulic System
Pump Flow Capacity50 gal/min (189 l/min)
Relief Valve Pressure2,799 psi
Operating Specifications
Alternator Supplied Amperage95 A
Cooling System Fluid Capacity19 gal (70 l)
Engine Oil Capacity7 gal (28 l)
Final Drives Fluid Capacity4 gal (14 l)
Fuel Capacity112 gal (424 l)
Hydraulic Fluid Capacity14 gal (51 l)
Operating Voltage24 V V
Operating Weight48,909 lbs (22,185 kg)
Standard Blade
Capacity6 cu yds (4 m)
Height46 in (117 cm)
Width14 ft (4 m)
Transmission
Max Speed - Forward7 mph (12 kph)
Max Speed - Reverse9 mph (15 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission TypePowershift
Undercarriage
Ground Contact Area6,780 cu in (0 m)
Ground Pressure7 psi
Number of Shoes per Side41
Number of Track Rollers per Side7
Standard Shoe Size30 in (76 cm)
Track Pitch8 in (20 cm)

Dealer Contact Info:

Altorfer Cat

Fax: 319-365-5639



Contact: Wm. E. Musgrave

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo