2012 Caterpillar D6T For Sale in Minneapolis, MN



For Sale: $117,500.00 USD


Ziegler CAT

https://www.zieglercat.com


Contact: Used Equipment

Click for Phone Number


Machine Info:

Hours:11221
Serial Number:ZJB00406
Stock Number:D6050
Machine Location:MINNEAPOLIS MN, 55420

Description:

ACCUGRADE READYAIR CONDITIONERAIR SUSPENSION SEATBLADE, SBLADE, SINGLE ANGLE TILTDIFF STEERDRAWBARENGINE ENCLOSURESEROPSLGPLIGHTINGPRODUCT LINKULTRA LOW SULFUR DIESEL FUEL6S LGP BULLDOZERACCUGRADE READY, CABALTERNATOR, 150 AMPANTIFREEZE, -50C (-58F)BLADE, 6S LGP AROCYLINDER, LIFT WITH LINES - LHCYLINDER, LIFT WITH LINES - RHDQCAT0118347Q1;PL321DRAINS, ECOLOGY, POWERTRAINDRAWBAR, RIGID LONGENGINE S/N MME05384HEATER, ENGINE COOLANT, 120VHEAVY DUTY GUARD PACKAGELIGHTS 6, BASICOIL CHANGE SYSTEM, POWERTRAINSATELLITE PRODUCT LINKSTARTER, HEAVY DUTYTOWING DEVICE, PULL-HOOKTRACK, 36" ES (45 SEC)

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes - WILL BE CLEANED
S.O.S. TakenYes - TRANSMISSION & ENGINE WERE SAMPLED.
Notes - GENERAL APPEARANCE - THE MACHINE IS OVERALL STRAIGHT. WILL BE CLEANED
Cab or CanopyGood
DecalsGood - REAR DECAL REPLACED
Draw BarGood
FendersGood
Fuel TankGood
Grab IronsGood
HoodGood
Main Frame WeldsGood
PaintFair - LOOKS GOOD FOR THE HRS.
Pre-Cleaner BowlGood
Sheet MetalGood
Steps / LadderGood - REPAIRED 4/21
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Current Parts ManualNo
Current Safety ManualYes
Air ConditionerGood - WILL BE TESTED FOR PROPER OPERATION 4/21
Dash ConsoleGood
EMS Panel / WarningsGood
GaugesGood
Glass/MirrorsGood
HeaterGood
Interior LightsGood
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersGood - REPAIRED 4/21
ENGINE
Blow ByYes - NORMAL
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Notes - ENGINE - REAR GEARTRAIN HAD ALL GEARS REPLACED & REAR CRANK SEAL REPLACED 10-18 2,280 HRS AGO. THE ENGINE IS RUNNING SMOOTH & STILL HAS GOOD OVERALL POWER SO CAN BE SOLD AS IS.
Oil Pressure (H/L/N) - NORMAL
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood - HIGH PRESSURE PUMP REPLACED 9,515 HRS AGO. ALL INJECTORS WERE REPLACED 8-17 4,694 HRS AGO. #5 & #6 INJECTORS REPLACED 7-18 2,908 HRS AGO.
Operating Condition - ENGINEGood
Turbocharger / BlowerGood - ORIG
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Standard RadiatorYes
Notes - COOLING SYSTEM - THE COOLING SYSTEM IS FUNCTIONING NORMAL IN 15 DEGREE WEATHER.
Belts / Pulleys - COOLING SYSTEMGood - THE BELT IS STARTING TO SHOW SOME WEAR
CoolersGood - ORIG
FanGood
HosesGood
RadiatorGood - ORIG
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
AlternatorGood
Batteries / CablesGood
Pre-HeaterGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
Notes - TRANSMISSION - T/C WAS REBEARINGED & RESEALED 10-18 2,280 HRS AGO. THE TRANSMISSION IS SHIFTING NORMAL BUT IS ORIGINAL. THE SAMPLE TAKEN RETURNED NORMAL.
CaseGood
Controls - TRANSMISSIONGood
CoolerGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood - WAS DISASSEMBLED RESEALED & INSPECTED 10-18 2,280 HRS AGO.
SealsGood
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Notes - STEERING - THE MACHINE IS STEERING NORMAL.
Differential SteerGood
Differential Steering ControlsGood
Steering Operating ConditionGood
BRAKE
Holding What Gear? - HOLDS IN SECOND GEAR STALL.
HYDRAULICS
Leaks - HYDRAULICSNo
Notes - HYDRAULICS - THE HYDRAULICS ARE FUNCTIONING NORMAL.
Control Linkage - HYDRAULICSGood
Hose LinesFair
Lift CylindersGood - resealed
Overall Operating ConditionGood
Tilt CylinderFair - SOME PLAY NORMAL FOR 11000 MACHINE
BLADE
Cutting Edge & BitsGood - EDGES CAN STILL BE TURNED.
Face / MoldboardGood
PinsFair - SOME PLAY.
Push ArmFair - HAVE PLAY
Spill RackGood
Tilt ArmsGood
TrunnionsGood
UNDERCARRIAGE
Pins & Bushings Turned?No
Equalizer Bar - THE OUTER JOINTS ARE FUNCTIONAL BUT THE CENTER PIN IS WORN.
Notes - UNDERCARRIAGE 1 - NEW RAILS, SPROCKETS, BOTTOM ROLLERS & CARRIERS INSTALLED 6-19 1,199 HRS AGO.
Pivot Shaft - DRY
Track Frame - LeftGood
Track Frame - RightGood
Carrier Rollers Front
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Pins & Bushings (Internal)
Track Roller 1
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
Track Roller 8
FINAL DRIVES
Notes - FINAL DRIVES - BOTH FINAL DRIVES ARE ORIGINAL BUT THE OILS ARE LEVEL & CLEAN WITH CLEAN MAGNETS
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood - ORIG
Planetaries / Differential, RightGood - ORIG
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - THE MACHINE IS CURRENTLY FUNCTIONING WITH ORIGINAL COMPONENTS. THE ENGINE IS RUNNING SMOOTH WITH GOOD OVERALL POWER AND THE TRANSMISSION IS SHIFTING NORMAL TO ALL GEARS.


Specs from the manufacturer:

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes23 in (58 cm)
Length - Track on Ground113 in (287 cm)
Engine
Bore4 in (11 cm)
Displacement537 cu in (0 m)
Engine ModelCat C9 ACERT
Flywheel Power200 hp (149 kw)
Gross Power213 hp (159 kw)
MakeCat
ModelC9 ACERT
Net Power185 hp (138 kw)
Net Power - Caterpillar185 hp (138 kw)
Net Power - EU 80/1269185 hp (138 kw)
Net Power - ISO 9249185 hp (138 kw)
Net Power - SAE J1349183 hp (136 kw)
Stroke6 in (15 cm)
Hydraulic Controls - Pump
Ripper Cylinder Flow50 gal/min (189 l/min)
Tilt Cylinder Flow21 gal/min (80 l/min)
Operating Specifications
Operating Weight40,550 lbs (18,393 kg)
Ripper
Beam Cross Section216 254 mm 8.5 10 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole20 in (51 cm)
Maximum Penetration20 in (50 cm)
Maximum Penetration Force14,557 lbs (6,603 kg)
Number of Pockets3
Overall Beam Width87 in (221 cm)
Pry-Out Force20,137 lbs (9,134 kg)
Ripper TypeFixed Parallelogram
Weight - Each Additional Shank163 lbs (74 kg)
Weight - With One Shank3,606 lbs (1,636 kg)
Service Refill Capacities
Cooling System20 gal (77 l)
Engine Crankcase7 gal (28 l)
Final Drive - Each4 gal (14 l)
Fuel Tank112 gal (424 l)
Hydraulic Tank14 gal (51 l)
Pivot Shaft Compartment1 gal (5 l)
Power Train39 gal (146 l)
Roller Frames - Each7 gal (25 l)
Standards
BrakesBrakes meet criterion SAE J/ISO 10265 MAR99
Transmission
2 Forward3 mph (5 kph)
2 Reverse4 mph (7 kph)
3 Forward5 mph (9 kph)
3 Reverse7 mph (11 kph)
3.5 Reverse9 mph (15 kph)
Undercarriage
Ground Pressure9 psi
Grouser Height3 in (7 cm)
Winch
Drum Capacity - 22 mm (0.88 in)290 ft in (737 cm)
Drum Capacity - 25 mm (1.0 in)220 ft (67 m)
Drum Capacity - 29 mm (1.13 in)220 ft in (559 cm)
Drum Diameter10 in (25 cm)
Drum Width13 in (33 cm)
Ferrule Size (O.D. Length)54 67 mm 2.10 2.63 in
Flange Diameter20 in (50 cm)
Increased Tractor Length - LGP16 in (40 cm)
Increased Tractor Length - STD20 in (52 cm)
Increased Tractor Length - XL/XW20 in (52 cm)
Oil Capacity18 gal (67 l)
Weight2,600 lbs (1,179 kg)
Winch and Bracket Length48 in (121 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

Ziegler CAT




Contact: Used Equipment

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo