2008 Caterpillar D6T For Sale in Indianapolis, IN



For Sale: $67,500.00 USD


MacAllister Machinery Co., Inc.

https://www.macallister.com


Contact: Used Equipment Team

Click for Phone Number

Machine Info:

Hours:10965
Serial Number:SKL00547
Machine Location:INDIANAPOLIS, IN 46219

Description:

AIR CONDITIONERAIR SUSPENSION SEATAM FM RADIOBLADE, SEMI UDIFF STEERDRAWBARENGINE ENCLOSURESEROPSHAND AND FOOT CONTROLHYD CONTROLLIGHTINGPILOT CONTROLPRODUCT LINKSTABLE BLADE CONTROLULTRA LOW SULFUR DIESEL FUEL

Machine Details:

GENERAL APPEARANCE
S.O.S. TakenYes
Cab or CanopyGood
DecalsFair
Draw BarGood
FendersFair
Fuel TankGood
Grab IronsGood
HoodGood
Main Frame WeldsGood
PaintGood
Pre-Cleaner BowlGood
Sheet MetalFair
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Air ConditionerGood
Dash ConsoleFair - Front dash cracked and taped
EMS Panel / WarningsGood
GaugesGood
Glass/MirrorsGood
HeaterGood
Interior LightsGood
Seat Cushion / Arm RestFair - Burn holes in lower cushion
SwitchesGood
Windshield WipersPoor - Wipers don’t work
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Oil Pressure (H/L/N) - Normal
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Standard RadiatorYes
Belts / Pulleys - COOLING SYSTEMFair - Slight squeal when A/C compressor kicks on
CoolersGood
FanGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Batteries / CablesGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONGood
CoolerGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood
SealsGood
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Differential SteerGood
Differential Steering ControlsGood
Steering ClutchGood
Steering LinkageGood
Steering Operating ConditionGood
HYDRAULICS
Leaks - HYDRAULICSYes - Lift cylinder and hose at tilt cylinder leaving small drip over a few days
Control Linkage - HYDRAULICSGood
Hose LinesFair
Lift CylindersFair - Left side lift cylinder is slightly wet around wiper seal
Overall Operating ConditionGood
Tilt CylinderGood
BLADE
Cutting Edge & BitsGood
Face / MoldboardFair
KnuckleFair
PinsFair
Push ArmFair - Bearing connecting both push arms is worn and loose
Spill RackFair
Tilt ArmsGood
TrunnionsFair - Not a lot of shims left to be removed
UNDERCARRIAGE
Track Frame - LeftGood
Track Frame - RightGood
Carrier Rollers Front
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Segments
Track Roller 1
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
FINAL DRIVES
Housings, LeftFair
Housings, RightFair
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Injector cups have been replaced and injectors resealed
comment 2 - Cooling system flushed and filled
comment 3 - Engine has been serviced
comment 4 - New Cat batteries and alternator installed
comment 5 - PL321 registered
comment 6 - Seat belt replaced 06/21


Specs from the manufacturer:

Dimensions
Drawbar Height (Center of Clevis) from Ground Face of Shoes23 in (58 cm)
Length - Track on Ground113 in (287 cm)
Engine
Bore4 in (11 cm)
Displacement537 cu in (0 m)
Engine ModelCat C9 ACERT
Flywheel Power200 hp (149 kw)
Gross Power213 hp (159 kw)
MakeCat
ModelC9 ACERT
Net Power185 hp (138 kw)
Net Power - Caterpillar185 hp (138 kw)
Net Power - EU 80/1269185 hp (138 kw)
Net Power - ISO 9249185 hp (138 kw)
Net Power - SAE J1349183 hp (136 kw)
Stroke6 in (15 cm)
Hydraulic Controls - Pump
Ripper Cylinder Flow50 gal/min (189 l/min)
Tilt Cylinder Flow21 gal/min (80 l/min)
Operating Specifications
Operating Weight40,550 lbs (18,393 kg)
Ripper
Beam Cross Section216 254 mm 8.5 10 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole20 in (51 cm)
Maximum Penetration20 in (50 cm)
Maximum Penetration Force14,557 lbs (6,603 kg)
Number of Pockets3
Overall Beam Width87 in (221 cm)
Pry-Out Force20,137 lbs (9,134 kg)
Ripper TypeFixed Parallelogram
Weight - Each Additional Shank163 lbs (74 kg)
Weight - With One Shank3,606 lbs (1,636 kg)
Service Refill Capacities
Cooling System20 gal (77 l)
Engine Crankcase7 gal (28 l)
Final Drive - Each4 gal (14 l)
Fuel Tank112 gal (424 l)
Hydraulic Tank14 gal (51 l)
Pivot Shaft Compartment1 gal (5 l)
Power Train39 gal (146 l)
Roller Frames - Each7 gal (25 l)
Standards
BrakesBrakes meet criterion SAE J/ISO 10265 MAR99
Transmission
2 Forward3 mph (5 kph)
2 Reverse4 mph (7 kph)
3 Forward5 mph (9 kph)
3 Reverse7 mph (11 kph)
3.5 Reverse9 mph (15 kph)
Undercarriage
Ground Pressure9 psi
Grouser Height3 in (7 cm)
Winch
Drum Capacity - 22 mm (0.88 in)290 ft in (737 cm)
Drum Capacity - 25 mm (1.0 in)220 ft (67 m)
Drum Capacity - 29 mm (1.13 in)220 ft in (559 cm)
Drum Diameter10 in (25 cm)
Drum Width13 in (33 cm)
Ferrule Size (O.D. Length)54 67 mm 2.10 2.63 in
Flange Diameter20 in (50 cm)
Increased Tractor Length - LGP16 in (40 cm)
Increased Tractor Length - STD20 in (52 cm)
Increased Tractor Length - XL/XW20 in (52 cm)
Oil Capacity18 gal (67 l)
Weight2,600 lbs (1,179 kg)
Winch and Bracket Length48 in (121 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

MacAllister Machinery Co., Inc.

Fax: 317-860-3310



Contact: Used Equipment Team

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo