This machine has been sold.

2012 Caterpillar D8T



MACHINE SOLD


Boyd CAT

http://www.boydcat.com


Contact: Scott Robinson

Click for Phone Number


Machine Info:

Hours:10833
Serial Number:MLN00741
Machine Location:LOUISVILLE KY, 40211

Description:

AIR CONDITIONERBEACONBLADE, SEMI UCE PLATEDIFF STEERENGINE ENCLOSURESEPA LABELEROPSHYD CONTROLLIGHTINGRIPPER, SINGLE SH

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes - Just muddy
S.O.S. TakenYes
Cab or CanopyGood
DecalsGood
FendersGood
Fuel TankGood
Grab IronsGood - Some grab irons were removed by Charah and can be put back on
HoodGood
Main Frame WeldsGood
PaintGood
Pre-Cleaner BowlGood
Sheet MetalGood
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Notes - SAFETY ITEMS - All safer items are operational as required by Charah’s very strict safety requirements
Back Up AlarmGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Current Parts ManualYes
Current Safety ManualYes
Notes - GAUGES, OPERATOR STATION, CONSOLE - All operational
Air ConditionerGood - New A/C compressor being installed now
Dash ConsoleGood
EMS Panel / WarningsGood
GaugesGood
Glass/MirrorsGood - Rearview mirror is cracked (not broken)
HeaterGood
Interior LightsGood
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersGood
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Notes - ENGINE - Runs great and engine had an in-frame rebuild at 7,174 hours
Oil Pressure (H/L/N) - Normal
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Standard RadiatorYes
Notes - COOLING SYSTEM - All good
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidNo
Notes - ELECTRICAL, STARTING AND CHARGING SYSTEM - All good
AlternatorGood
Batteries / CablesGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
Notes - TRANSMISSION - All works good
CaseGood
Controls - TRANSMISSIONGood
CoolerGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood
SealsGood
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Notes - STEERING - All good
Differential SteerGood
Differential Steering ControlsGood
Steering Operating ConditionGood
BRAKE
Notes - BRAKE - Good
HYDRAULICS
Leaks - HYDRAULICSNo
Notes - HYDRAULICS - All good
Control Linkage - HYDRAULICSGood
Hose LinesGood
Lift CylindersGood
Overall Operating ConditionGood
Tilt CylinderGood
BLADE
Notes - BLADE - Blade in good shape for hours
Cutting Edge & BitsGood
Face / MoldboardGood
PinsGood
Push ArmGood
Spill RackGood
Tilt ArmsGood
TrunnionsGood
RIPPER / GRAPPLE / WINCH
Notes - RIPPER / GRAPPLE / WINCH - All good and operational
Hydraulic WinchNo
Mechanical WinchNo
Beam / FrameGood
Ripper Lift CylinderGood
Ripper Tilt CylinderGood
Seals / CaseGood
Shanks / GetGood
UNDERCARRIAGE
Average Life Remaining - UNDERCARRIAGE - See attached recently performed CTS report for full details
FINAL DRIVES
Notes - FINAL DRIVES - Boyd performs all PM’s On this unit for last 12+ months
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Machine is used everyday and engine had an in-frame rebuild at 7,174 hours
comment 2 - Boyd has performed all PM’s and service work for last (12) plus months at the Trimble Co. Landfill project
comment 3 - See recently completed CTS report that is attached


Specs from the manufacturer:

Dimensions
Ground Clearance2 ft (1 m)
Height - Top of Cab12 ft (4 m)
Length of Track on Ground11 ft (3 m)
Length w/ Blade20 ft (6 m)
Length w/o Blade15 ft (5 m)
Width Over Tracks8.9 ft in (23 cm)
Engine
Displacement928 cu in (0 m)
Engine ModelC15 ACERT
Gross Power347 hp (259 kw)
MakeCat
ModelC15 ACERT
Net Power310 hp (231 kw)
Hydraulic System
Pump Flow Capacity73 gal/min (276 l/min)
Pump typepiston-type, variable displacement
Relief Valve Pressure5,700 psi
Operating Specifications
Alternator Supplied Amperage100 A
Cooling System Fluid Capacity20 gal (77 l)
Engine Oil Capacity10 gal (38 l)
Final Drives Fluid Capacity3 gal (12 l)
Fuel Capacity170 gal (643 l)
Hydraulic Fluid Capacity20 gal (75 l)
Operating Voltage24 V V
Operating Weight86,900 lbs (39,418 kg)
Standard Blade
Capacity11 cu yds (9 m)
Height65 in (165 cm)
Width13 ft (4 m)
Transmission
Max Speed - Forward7 mph (11 kph)
Max Speed - Reverse9 mph (14 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission TypeHydrostatic
Undercarriage
Ground Contact Area5,554 cu in (0 m)
Number of Carrier Rollers per Side1
Number of Shoes per Side44
Number of Track Rollers per Side8
Standard Shoe Size24 in (61 cm)
Track Gauge7 ft (2 m)
Track Pitch9 in (22 cm)

Dealer Contact Info:

Boyd CAT

Fax: 502-778-3453



Contact: Scott Robinson

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo