2012 Caterpillar D9T For Sale in Harrisburg, PA



For Sale: $400,000.00 USD


Cleveland Brothers

https://www.clevelandbrothers.com


Contact: Erin Westbrook

Click for Phone Number

Machine Info:

Hours:11232
Serial Number:TWG00247
Stock Number:UP17369
Machine Location:HARRISBURG, PA 17111

Description:

AM FM RADIOPRODUCT LINKLIGHTINGHYD CONTROLSTEER, JOYSTICKENGINE ENCLOSURESBLADE, SINGLE ANGLE TILTAIR SUSPENSION SEATAIR CONDITIONERRIPPER, SINGLE SHHAND AND FOOT CONTROLDIFF STEERAUXILIARY HYDRAULICS

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenYes
BumperFair
Cab or CanopyFair
DecalsFair
FendersFair
Fuel TankFair
Grab IronsFair
HoodFair
Main Frame WeldsFair
PaintFair
Sheet MetalFair
Steps / LadderFair
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmFair
HornFair
Parking Brake - SAFETY ITEMSFair
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes - Manuals in very poor shape.
Current Parts ManualNo
Current Safety ManualYes
Notes - GAUGES, OPERATOR STATION, CONSOLE - Joystick blade tilt toggle is broken. Boot is ripped.
Air ConditionerFair
Dash ConsoleFair
EMS Panel / WarningsFair
GaugesFair
Glass/MirrorsPoor - Both mirrors missing off of lift cylinders.
HeaterFair
Interior LightsFair
Seat Cushion / Arm RestFair
SwitchesFair
Windshield WipersPoor - Front wiper needs new blades and rear wiper needs a nut for the motor.
ENGINE
Blow ByNo
Compression in RadiatorYes
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Air CleanersFair
Engine SupportsFair
Fuel Injection SystemFair
Operating Condition - ENGINEFair
Turbocharger / BlowerFair
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Notes - COOLING SYSTEM - One leak on right side. Tightened clamp. Leak gone at this time.
Belts / Pulleys - COOLING SYSTEMFair
CoolersFair
FanFair
HosesFair
RadiatorFair
Water PumpFair
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidYes - Ether aid is damaged/not mounted. Needs repaired and bottle installed.
AlternatorFair
Batteries / CablesFair
StarterFair
WiringFair
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
CaseFair
Controls - TRANSMISSIONFair
CoolerFair
Lines / Fittings - TRANSMISSIONFair
Operating Condition - TRANSMISSIONFair
Pump - TRANSMISSIONFair
SealsFair
Temp / Pressure GaugesFair
Transmission - Forward ShiftsFair
Transmission - Reverse ShiftsFair
STEERING
Differential SteerFair
Differential Steering ControlsFair
Steering ClutchFair
Steering LinkageFair
Steering Operating ConditionFair
HYDRAULICS
Leaks - HYDRAULICSNo
Notes - HYDRAULICS - No caps for blade tilt. Going to install two to stop leak. Just missing caps no further issue.
Control Linkage - HYDRAULICSFair
Hose LinesPoor - One of the machine side tilt cylinder lines is damaged and the hard line is also bent.
Lift CylindersFair - Deeper than surface scrapes on bottom of both cylinders. Left is significantly worse than the right.
Overall Operating ConditionFair
Tilt CylinderFair
BLADE
Notes - BLADE - Worn overall. A lot of play on pins and bearings. Could make blade seem very loose when working.
Cutting Edge & BitsPoor - Has been flipped once. Hardware worn on end bits.
Face / MoldboardFair
PinsFair
Push ArmFair
Spill RackFair
Tilt ArmsFair
TrunnionsPoor - Visibly worn. Can feel wear by touch.
RIPPER / GRAPPLE / WINCH
Notes - RIPPER / GRAPPLE / WINCH - Quick pin operates okay.
Beam / FrameFair
Lines / Fittings - RIPPER / GRAPPLE / WINCH - Multiple spots of leaks on valve body
Pins & BushingsFair
Ripper Lift CylinderFair
Ripper Tilt CylinderFair
Shanks / GetFair
UNDERCARRIAGE
Pivot Shaft - Track too muddy to inspect
Track Frame - LeftFair
Track Frame - RightFair
Carrier Rollers Front
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Segments
Track Roller 1
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
Track Roller 8
FINAL DRIVES
Housings, LeftFair
Housings, RightFair
Planetaries / Differential, LeftFair
Planetaries / Differential, RightFair
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Needs product link antenna.
comment 2 - Needs am/fm radio antenna.


Specs from the manufacturer:

Dimensions
Ground Clearance2 ft (1 m)
Height - Top of Cab13 ft (4 m)
Length of Track on Ground11 ft (3 m)
Length w/ Blade22 ft (7 m)
Length w/o Blade16 ft (5 m)
Width Over Tracks9.4 ft in (24 cm)
Engine
Displacement1,106 cu in (0 m)
Engine ModelC18 ACERT
Gross Power464 hp (346 kw)
MakeCat
ModelC18 ACERT
Net Power410 hp (306 kw)
Power Measured @1,800 rpm
Hydraulic System
Pump Flow Capacity101 gal/min (382 l/min)
Pump typePiston
Relief Valve Pressure5,875 psi
Operating Specifications
Alternator Supplied Amperage95 A
Cooling System Fluid Capacity28 gal (104 l)
Engine Oil Capacity10 gal (38 l)
Final Drives Fluid Capacity4 gal (15 l)
Fuel Capacity235 gal (889 l)
Hydraulic Fluid Capacity24 gal (89 l)
Operating Voltage24 V V
Operating Weight105,600 lbs (47,900 kg)
Standard Blade
Capacity18 cu yds (14 m)
Height7 in (17 cm)
Width14 ft (4 m)
Transmission
Max Speed - Forward7 mph (12 kph)
Max Speed - Reverse9 mph (14 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission TypePower Shift
Undercarriage
Ground Contact Area6,569 cu in (0 m)
Ground Pressure16 psi
Number of Shoes per Side43
Number of Track Rollers per Side8
Standard Shoe Size24 in (61 cm)
Track Gauge7 ft (2 m)
Track Pitch10 in (24 cm)

Dealer Contact Info:

Cleveland Brothers

Fax: 717-564-6931



Contact: Erin Westbrook

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo