2001 Caterpillar 302.5 For Sale in Salem, VA




For Sale: $22,500.00 USD


Carter Machinery

https://www.cartermachinery.com


Contact: Tim Eldridge

Click for Phone Number

Machine Info:

Hours:465
Serial Number:4AZ02702
Stock Number:CON593180
Machine Location:SALEM VA, 24153

Description:

18" BUCKET465 NOT CORRECT HOURSALARM, TRAVELCANOPYFOOT PEDALS, TRAVELHOUR METER NOT WORKINGINSTRUCTIONS, ENGLISHLIGHTS, WORKING, BOOM MOUNTEDLIGHTS, WORKING, CAB/CANOPYLINES, 2WAY AUX HYD STD(QDC)LINES, AUXILIARY,FRONTLINES, STD. BOOM HYDRAULICSMIRROR, EXTERIOR,LEFT HANDMIRROR, EXTERIOR,RIGHT HANDPACK, MISCELLANEOUS MATERIALPACK, ROLL ON/ROLL OFF BY SEASEAT BELT, 2" SUSPENSIONSEAT, VINYLTRACKS, RUBBER BELTVALVES, DRAIN,ECO


Specs from the manufacturer:

Blades
Dig Depth11 in (28 cm)
Height14 in (36 cm)
Lift Height13 in (33 cm)
Width5 ft (1 m)
Dimensions
Center Ground Clearance1 ft (0 m)
Ground Clearance1 ft (0 m)
Height - Over Cab8 ft (2 m)
Height - Over Canopy8 ft (2 m)
Height - Top of Cab8 ft (2 m)
Length of Track on Ground5 ft (1 m)
Maximum Cutting Height - Long Stick15 ft (5 m)
Maximum Cutting Height - Standard Stick14 ft (4 m)
Maximum Digging Depth - Long Stick10 ft (3 m)
Maximum Digging Depth - Standard Stick9 ft (3 m)
Maximum Dump Height - Long Stick11 ft (3 m)
Maximum Dump Height - Standard Stick10 ft (3 m)
Maximum Horizontal Reach - Long Stick16 ft (5 m)
Maximum Horizontal Reach - Standard Stick15 ft (5 m)
Maximum Reach - Ground Level - Long Stick16 ft (5 m)
Maximum Reach - Ground Level - Standard Stick15 ft (5 m)
Maximum Vertical Dig Depth - Long Stick8 ft (2 m)
Maximum Vertical Dig Depth - Standard Stick7 ft (2 m)
Removal Counterweight Clearance2 ft (1 m)
Shipping Length15 ft (5 m)
Stick Length - Long Stick5 ft (1 m)
Stick Length - Standard Stick4 ft (1 m)
Swing Radius - Rear4 ft (1 m)
Tail Swing Radius4 ft (1 m)
Track Gauge4 ft (1 m)
Track Shoe Width12 ft (4 m)
Width - Over Track5 ft (1 m)
Width - Upper Structure5 ft (1 m)
Width to Outside of Tracks4 ft (1 m)
Electrical System
Electrical System TypeTwelve-volt system
Engine
Bore3 in (8 cm)
Displacement91 cu in (0 m)
Engine Model3,013
Net Power24 hp (18 kw)
Stroke4 in (10 cm)
Hydraulic System
Auxiliary Circuit - Primary (245 bar/3,553 psi)14 gal/min (51 l/min)
Digging Force - Bucket4,928 lbs (2,235 kg)
Digging Force - Stick - Long2,665 lbs (1,209 kg)
Digging Force - Stick - Standard3,124 lbs (1,417 kg)
Operating Pressure - Equipment2,987 psi
Operating Pressure - Swing2,494 psi
Operating Pressure - Travel2,987 psi
Pump - Gear (Single)5 gal/min (19 l/min)
Pump - Gear (Tandem)9 gal/min (33 l/min)
Operating Specifications
Fuel Capacity11 gal (42 l)
Hydraulic System Fluid Capacity13 gal (50 l)
Hydraulic System Relief Valve Pressure2,987 psi
Operating Weight6,028 lbs (2,734 kg)
Service Refill Capacities
Cooling System TAG1 gal (4 l)
Engine Oil2 gal (6 l)
Fuel Tank11 gal (41 l)
Hydraulic System13 gal (49 l)
Hydraulic Tank9 gal (36 l)
Swing System
Boom Swing - Left - With Stop55 °
Boom Swing - Left - Without Stop90 °
Boom Swing - Right50 °
Machine Swing Speed9 rpm
Swing System TypeHydraulic Motor Driven
Travel System
Maximum Traction Force - High Speed2,475 lbs (1,123 kg)
Maximum Traction Force - Low Speed4,950 lbs (2,245 kg)
Travel Speed - High3 mph (5 kph)
Travel Speed - Low2 mph (3 kph)
Undercarriage
Drawbar Pull4,950 lbs (2,245 kg)
Max Travel Speed3 mph (5 kph)
Shoe Size12 in (30 cm)
Track Gauge4 ft (1 m)
Weights
Operating Weight5,762 lbs (2,614 kg)
Operating Weight - With Cab6,015 lbs (2,728 kg)

Dealer Contact Info:

Carter Machinery

Fax: 540-387-1692



Contact: Tim Eldridge

Click for Phone Number