2003 Caterpillar 325C L For Sale

Detail photo of 2003 Caterpillar 325C L from Construction Equipment Guide


Save Listing

$33,500.00 USD

Wyoming Machinery Company
https://www.wyomingcat.com


Click here to email
Wyoming Machinery Company.


☎ Click for Phone Number

Serial Number: BFE00597

Stock Number: BFE597

Machine Location: CASPER WY, 82604

Caterpillar 325C L Description:
CONTROL & LINES, PIN GRABBERLINES-QC, R10'6" STICKBUMPER, RUBBERLINES-QC, REACH BOOMGUARD, VANDALISM325CL EXCAVATORLINKAGE, BUCKET, C-FAMILYCHANGER, HAND CONTROL PATTERNPEDAL, STRAIGHT TRAVELGUARD, TRACK GUIDINGSTICK, 10'6"POWER SUPPLY,48" BUCKETSTARTING, COLD WEATHERBOOM, R-REACH (20'2")



GENERAL APPEARANCE
Cleaning RequiredYes
Extra Fuel TanksNo
S.O.S. TakenYes
Notes - GENERAL APPEARANCE - . Non ROPS cab. a few dings and dents in front of cab on posts.
BumperFair - bent step on tool box , ding in front bumper under cab
Car BodyFair
CatwalkFair
CounterweightFair - Many rubbed marks
Crankcase Guard / Battery BoxFair
DecalsPoor
Draw BarFair
Eng. Enclose Hood / StackPoor - both access side door wavy
Engine DoorsPoor - side door damage
FendersPoor - Rubber damaged on side bumpers
FiberglassFair
Fuel TankFair
Grab IronsFair - Some light damages.
HoodFair
Main Frame WeldsFair - No cracks or significant damages found.
PaintPoor
PlasticFair
Pre-Cleaner BowlPoor - N/A
Radiator Grill & ShroudFair
Sheet MetalPoor
Steps / LadderPoor - bent step on tool box and some damaged steps on swing frame
SAFETY ITEMS
Cab GuardsNo
ROPSNo
Safety Decals In PlaceNo
Safety Decals LegibleNo
Notes - SAFETY ITEMS - Travel alarm working. Wipers inoperative. No fire extinguisher, beacon or safety manual. Original seat belt. Windshield cracked. Steps bent. Mirrors and grab irons okay. All lights working. OM&M damaged.
Brake HoldFair
Fire ExtinguisherPoor - Not equipped.
HornFair - Works. Have to press hard on button to get to work.
Rig SaverPoor - N/A
Secondary ExitGood
Swing BrakeFair
GAUGES, OPERATOR STATION, CONSOLE
Back Up AlarmYes
Current O&MMYes - Damaged.
Current Parts ManualNo
Current Safety ManualNo
ROPS Certification PlateNo - Non ROPS cab.
Diesel Exhaust Fluid (DEF) Level - N/A
Fuel Level - 15-20 percent.
Notes - GAUGES, OPERATOR STATION, CONSOLE - Front window does not slide or lock into place. Guides for window slide missing. Windshield cracked. Radio and wipers/washers inoperative. Cab door damaged. Rust appearing. Cab is very dirty. Switch for QC but not equipped with QC.
Air ConditionerPoor - Inoperative.
Dash ConsolePoor - Missing louvers. Storage compartment behind seat broken.
Door LatchesGood
EMS Panel / WarningsGood
Floor BoardsFair
GaugesGood
Glass/MirrorsPoor - Windshield cracked. Side and rear window hazy.
HeaterFair
Interior LightsPoor - Inoperative
MeterFair - Working
Product LinkPoor - N/A
Seat BeltPoor - Original
Seat Cushion / Arm RestFair - Dirty. Stains.
SwitchesPoor - Switch for rear washer froze up.
Windshield WipersPoor - All inoperative.
ENGINE
Blow ByYes - Light to fair amount.
Compression in RadiatorNo
EPA DecalYes
Fluid Levels OK?Yes
KnockingYes - Odd noise present. Noise resembles more like valve train ticking. Noise seems to go away when lowering actuation pressure during actuation pressure testing.
Oil LeaksYes - Oil filter base leaking.
Water in OilNo
Anti-Freeze Color - Red
Notes - ENGINE - Had to use ether to get to start. Pre heater does not seem to be working. Heavy grayish smoke at startup. Ticking noise present at all engine rpm’s. Noise seems to be coming from fuel system. When running injection actuation test noise would go away.
Oil Pressure (H/L/N) - Normal range
Smoke (B/D/L/W) - Heavy grayish smoke at start up. Once warmed up light amount of black smoke under load that never fully clears up under load at high idle.
Air CleanersFair - Somewhat dirty. Housing cover cracked.
Belts / PulleysFair - Light cracks developing.
Engine SupportsFair
Exhaust / MufflerFair
Fuel Injection SystemFair - Noise heard with engine running goes away when actuation pressure is lowered.
GovernorGood
Oil Filter Condition (CUT)Fair - Last serviced at 13990 hours. 53 hours since last serviced.
Operating Condition - ENGINEFair - Hard starting. Ran okay once warmed up. AEC working.
Turbocharger / BlowerFair
COOLING SYSTEM
LeaksYes - Cold water leak where hose connects to regulator housing.
Notes - COOLING SYSTEM - Coolant level is a little low. Cold water leak found.
CoolersFair
FanFair
Fan DriveFair
HosesFair
RadiatorFair
Water PumpFair
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidNo
Notes - ELECTRICAL, STARTING AND CHARGING SYSTEM - Engine ECM generating active code. Starting and charging systems are okay. Had to use ether to get to start. All lights working.
AlternatorFair
Batteries / CablesFair
BeaconPoor - N/A
LightingGood
Pre-HeaterPoor - Inoperative
StarterFair
WiringFair
HYDRAULICS
Notes - HYDRAULICS - Machine travel control are leaking. Spring in RH travel control is weak. Travel motors run in both low/high speeds. All functions are pretty smooth. Hydraulic system filters need replaced.
Swing Drive Oil Level - Full
Boom CylinderFair
Bucket CylinderFair - Rod has some scratches.
Control LinkagePoor - N/A
Filter Condition (CUT)Poor - Over 500 hours on filters.
Hose LinesPoor - Multiple leaks. Rubbing. Need properly secured.
Hydraulic SwivelFair
Operating Condition - HYDRAULICSFair
Pump DriveGood
Pumps & ValvesPoor - Valves covered in oil. Unsure of leak source. Needs washed off and rechecked.
RotexFair
Stick CylinderFair
Swing GearFair
Swing MotorsFair
TankFair
Thumb CylinderPoor - N/A
Travel MotorsFair
ATTACHMENTS / WORK TOOLS
AugerNo
ClawNo
CrusherNo
GrappleNo
HammerNo
PulverizerNo
RakeNo
RipperNo
ShearNo
ThumbNo
Tilting Ditch BucketNo
Vibratory PlateNo
Notes - ATTACHMENTS / WORK TOOLS - N/A
Other - None
BOOM
Boom Length (Actual Length) - Unsure
Notes - BOOM - No cracks or significant damages found. Moderate play developing in all pins.
Boom ConditionFair - No cracks found. A little damage from bucket contact.
Boom PinsPoor
Pins & Bushings - BOOMPoor
STICK
Notes - STICK - Excessive play in bucket to stick pin and bore. All pins have moderate amount of play.
Stick Length - 10’6”
Pins & Bushings - STICKPoor
Stick ConditionsFair - No cracks found. Fair amount of damages.
Stick PinsPoor
BUCKET
Quick CouplerNo
Brand - TAG
Notes - BUCKET - No cracks or significant damages found. Needs new teeth.
Quick Coupler (Make/Model) - N/A
Serial Number - Unsure
Width - 48”
Bucket BottomFair
Bucket LinkagePoor - Dog bone bent. H-link mount at bucket very sloppy.
Bucket MountsFair
Bucket SidesFair
Cutting EdgesFair
Teeth / AdaptersPoor - Teeth pretty worn.
UNDERCARRIAGE
Pins & Bushings Turned?No
Average Life Remaining - UNDERCARRIAGE - Varies.
Cannon - No leaks found. RH track is partially collapsed.
Carrier Rollers - Fair to Moderate wear developing.
Idlers - Fair amount of wear developing.
Link Part Number - LH- 6Y1608 RH- 6Y1607
Links - Fair amount of wear developing.
Notes - UNDERCARRIAGE - All UC components showing fair amount of wear. Did not remeasure UC since has only ran just over 200 hours since last measurement. Conditions look consistent with previous inspection.
Notes - UNDERCARRIAGE 1 - Some loose track pads found.
Notes - UNDERCARRIAGE 2 - Tracks are squeaking and squealing when rotating tracks, #3 and #9 rollers on RH side and #6 roller on LH side leaking. Some dry, sticky joints.
Pins & Bushings (External) - Fair amount of wear developing. Some dry and sticky joints.
Pins & Bushings (Internal) - No excessive stretching observed.
Segments - Fair amount of wear developing.
Track Shoes - 31.5” wide. No bent, broken or significantly damaged shoes.
Track Frame - LeftFair - No cracks or significant damages found.
Track Frame - RightFair
Carrier Rollers Front
Carrier Rollers Rear
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Pins & Bushings (Internal)
Segments
Track Roller 1
Track Roller 10
Track Roller 11
Track Roller 12
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
Track Roller 8
Track Roller 9
Track Shoes (Width)
FINAL DRIVES
Notes - FINAL DRIVES - No leaks found. Motors run in both low/high speed. Machine tracks straight in both directions.
HousingsFair
Planetaries / DiffFair
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Machine had engine rebuilt at 7600 hours


Dealer Contact Info:

Wyoming Machinery Company

Click here for more information about Wyoming Machinery Company

https://www.wyomingcat.com
☎ Click for Phone Number

Fax: 307-261-4486


☎ Click for Phone Number