2005 Caterpillar 825H For Sale in Bellevue, IA



For Sale: $265,000.00 USD

This machine is available to rent.


J.J. Scheckel

https://www.jjscheckel.com


Contact: Josh Scheckel

Click for Phone Number

Machine Info:

Hours:15500
Serial Number:TAZ A02680
Machine Location:BELLEVUE IA, 52031

Description:

2005 Cat 825H Compactor, Well Maintained, Excellent Feet, Erops, Tilt Blade, Clean Machine, Cat Facts Service History Available. Rental Available. For Rent or Sale!

· 15,500 original Frame Hours. The machines ECM has recorded this machine at a low lifetime load factor of just 31%, and lifetime average fuel rate at just 3.1 gallons per hour.


· Straight Blade w/ Tilt
· Enclosed Cab
· Air Condition, Heat
· Command Control, Conventional Steering Wheel
· Joystick blade control
· Fast Fuel
· Light Kit
· Railings
· 44” Wide, Compactor Wheels
· 54” Diameter, Compactor Wheels
· Standard, Soil Compaction Wheel Tips
· Operating Weight – 72,000 lbs
· 400 HP, Cat C15 Accert engine

Finance & Rental programs available for this machine.

This hard to find Cat 825H, Cab is super clean, and everything on the machine works as it should. This unit came from a good home, and has been maintained and serviced on schedule. Pins and Bushings in the center frame, and blade are all tight.


Specs from the manufacturer:

Axles
FrontFixed
RearOscillating 9
Blades
Blade Tilt Angle - Left - Hydraulic5.6 °
Blade Tilt Angle - Right - Hydraulic5.6 °
Height41 in (104 cm)
Height - Including Cutting Edge3 ft (1 m)
Maximum Depth of Cut1 ft (0 m)
Maximum Lift Above Ground3 ft (1 m)
Moldboard - Length14 ft (4 m)
Total Tilt Adjustment3 ft (1 m)
Width15 ft (4 m)
Width - Over End Bits15 ft (5 m)
Brakes
StandardsMeet SAE/ISO 3450:1996
Cab
ROPS/FOPSMeets SAE and ISO standards
Dimensions
Ground Clearance1 ft (0 m)
Height - Top of Cab12 ft (4 m)
Length - With Blade on Ground28 ft (8 m)
Length With Blade on Ground28 ft (8 m)
Length with Blade on Ground28 ft (8 m)
Wheel Base12 ft (4 m)
Wheelbase12 ft (4 m)
Width - Over Drums12 ft (4 m)
Width - Over End Bits15 ft (5 m)
Width Over Wheels12 ft (4 m)
Engine
Bore5 in (14 cm)
Displacement928 cu in (0 m)
EEC 80/1269354 hp (264 kw)
Engine ModelCat C15 ACERT
Flywheel Power354 hp (264 kw)
Gross Power401 hp (299 kw)
Net Power354 hp (264 kw)
Power Measured @1,800 rpm
SAE J1349350 hp (261 kw)
Stroke7 in (17 cm)
Hydraulic System
Lift Cylinder Bore x Stroke95.25 mm x 711 mm (3.7 in x 28 in)
Relief Valve Setting3,500 psi
Operating Specifications
2424 V V
9595 A
Cooling System Fluid Capacity22 gal (83 l)
Engine Oil Capacity9 gal (34 l)
Fuel Capacity159 gal (603 l)
Operating Weight72,166 lbs (32,734 kg)
Transmission Fluid Capacity16 gal (62 l)
Turning Radius Blade - Outside24 ft (7 m)
Service Refill Capacities
Cooling System22 gal (83 l)
Crankcase9 gal (34 l)
Differential - Final Drives - Front24 gal (90 l)
Differential - Final Drives - Rear24 gal (90 l)
Fuel Tank159 gal (602 l)
Transmission16 gal (62 l)
Sound Performance
StandardsMeets ANSI/SAE, SAE and ISO requirements
Transmission
Forward - 13 mph (5 kph)
Forward - 26 mph (9 kph)
Forward - 310 mph (16 kph)
Max Speed11 mph (17 kph)
Number of Forward Gears3
Number of Reverse Gears3
Reverse - 14 mph (6 kph)
Reverse - 27 mph (11 kph)
Reverse - 311 mph (17 kph)
Weights
Operating Weight72,164 lbs (32,733 kg)
Wheels
Drum Diameter4 ft (1 m)
Drum Width4 ft (1 m)
Front Wheels Drum Diameter51 in (130 cm)
Front Wheels Drum Width44 in (113 cm)
Outside Diameter6 ft (2 m)
Rear Wheels Drum Diameter51 in (130 cm)
Rear Wheels Drum Width44 in (113 cm)

Dealer Contact Info:

J.J. Scheckel

Fax: 563-872-5058



Contact: Josh Scheckel

Click for Phone Number