| Axles |
| Front | Fixed |
| Rear | Oscillating 9 |
| Blades |
| Blade Tilt Angle - Left - Hydraulic | 5.6 ° |
| Blade Tilt Angle - Right - Hydraulic | 5.6 ° |
| Height | 41 in (104 cm) |
| Height - Including Cutting Edge | 3 ft (1 m) |
| Maximum Depth of Cut | 1 ft (0 m) |
| Maximum Lift Above Ground | 3 ft (1 m) |
| Moldboard - Length | 14 ft (4 m) |
| Total Tilt Adjustment | 3 ft (1 m) |
| Width | 15 ft (4 m) |
| Width - Over End Bits | 15 ft (5 m) |
| Brakes |
| Standards | Meet SAE/ISO 3450:1996 |
| Cab |
| ROPS/FOPS | Meets SAE and ISO standards |
| Dimensions |
| Ground Clearance | 1 ft (0 m) |
| Height - Top of Cab | 12 ft (4 m) |
| Length - With Blade on Ground | 28 ft (8 m) |
| Length With Blade on Ground | 28 ft (8 m) |
| Length with Blade on Ground | 28 ft (8 m) |
| Wheel Base | 12 ft (4 m) |
| Wheelbase | 12 ft (4 m) |
| Width - Over Drums | 12 ft (4 m) |
| Width - Over End Bits | 15 ft (5 m) |
| Width Over Wheels | 12 ft (4 m) |
| Engine |
| Bore | 5 in (14 cm) |
| Displacement | 928 cu in (0 m) |
| EEC 80/1269 | 354 hp (264 kw) |
| Engine Model | Cat C15 ACERT |
| Flywheel Power | 354 hp (264 kw) |
| Gross Power | 401 hp (299 kw) |
| Net Power | 354 hp (264 kw) |
| Power Measured @ | 1,800 rpm |
| SAE J1349 | 350 hp (261 kw) |
| Stroke | 7 in (17 cm) |
| Hydraulic System |
| Lift Cylinder Bore x Stroke | 95.25 mm x 711 mm (3.7 in x 28 in) |
| Relief Valve Setting | 3,500 psi |
| Operating Specifications |
| 24 | 24 V V |
| 95 | 95 A |
| Cooling System Fluid Capacity | 22 gal (83 l) |
| Engine Oil Capacity | 9 gal (34 l) |
| Fuel Capacity | 159 gal (603 l) |
| Operating Weight | 72,166 lbs (32,734 kg) |
| Transmission Fluid Capacity | 16 gal (62 l) |
| Turning Radius Blade - Outside | 24 ft (7 m) |
| Service Refill Capacities |
| Cooling System | 22 gal (83 l) |
| Crankcase | 9 gal (34 l) |
| Differential - Final Drives - Front | 24 gal (90 l) |
| Differential - Final Drives - Rear | 24 gal (90 l) |
| Fuel Tank | 159 gal (602 l) |
| Transmission | 16 gal (62 l) |
| Sound Performance |
| Standards | Meets ANSI/SAE, SAE and ISO requirements |
| Transmission |
| Forward - 1 | 3 mph (5 kph) |
| Forward - 2 | 6 mph (9 kph) |
| Forward - 3 | 10 mph (16 kph) |
| Max Speed | 11 mph (17 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Reverse - 1 | 4 mph (6 kph) |
| Reverse - 2 | 7 mph (11 kph) |
| Reverse - 3 | 11 mph (17 kph) |
| Weights |
| Operating Weight | 72,164 lbs (32,733 kg) |
| Wheels |
| Drum Diameter | 4 ft (1 m) |
| Drum Width | 4 ft (1 m) |
| Front Wheels Drum Diameter | 51 in (130 cm) |
| Front Wheels Drum Width | 44 in (113 cm) |
| Outside Diameter | 6 ft (2 m) |
| Rear Wheels Drum Diameter | 51 in (130 cm) |
| Rear Wheels Drum Width | 44 in (113 cm) |
Equipment
Search
News
Auctions
