This machine has been sold.

2007 Caterpillar 120H


  Auction Info: Starting on 2021-04-15

Machine Info:

Serial Number:CAT0120HACAF01105
Machine Location:JURUPA VALLEY CA,


2007 Caterpillar 120H Motor Grader, s/n CAT0120HACAF01105, Cat 3126 diesel, Powershift 8F 6R, A/C, with 12ft mold board, slide, tilt, pan, rotate, 5 shank hydraulic ripper enclosed cab, EROPS (may be subject to arb regulations, runs, moves & operates, has key) (Reads 3,783 hours) NOTE: This unit is being sold AS IS/WHERE IS via Timed Auction and is located in Jurupa Valley, CA. (Buyer is responsible for removal. Assistance by consignor or JJ Kane Auctioneers is not assured.)

Specs from the manufacturer:

Blade Tip Angle - Front40 °
Blade Tip Angle - Rear5 °
Diameter60 in (153 cm)
Max Lift Above Ground18 in (46 cm)
Max Reach Outside Tires - Left73 in (184 cm)
Max Reach Outside Tires - Right75 in (191 cm)
Rotation360 °
Shift Left25 in (63 cm)
Shift Right25 in (63 cm)
Front Ground Clearance2 ft (1 m)
Height to Top of Isomount Cab10 ft (3 m)
Overall Length27 ft (8 m)
Tandem Axle Wheelbase5 ft (2 m)
Wheelbase19 ft (6 m)
Width Over Tires8 ft (2 m)
Displacement403 cu in (0 m)
Engine Model3116 DITA
Max Power140 hp (104 kw)
Net Power Gear 4-6125 hp (93 kw)
Net Power Gears 7-8140 hp (104 kw)
Number of Cylinders6
Power Measured @2,000 rpm
Torque Measured @1,400 rpm
Front Axle
Ground Clearance2 ft (1 m)
Oscillation - Total32 °
Wheel Lean18 °
Hydraulic System
Pump Flow39 gal/min (148 l/min)
Pump TypeAxial Piston
Relief Valve Pressure3,500 psi
Blade Down Pressure20,062 lbs (9,100 kg)
Blade Pull at Max Weight23,504 lbs (10,661 kg)
Max Depth of Cut31 in (78 cm)
Moldboard Height24 in (61 cm)
Moldboard Thickness1 in (2 cm)
Moldboard Width12 ft (4 m)
Side Shift Left21 in (53 cm)
Side Shift Right26 in (66 cm)
Operating Specifications
Alternator Supplied Amperage35 A
Circle Gearbox Fluid Capacity2 gal (7 l)
Cooling System Fluid Capacity11 gal (40 l)
Fuel Capacity90 gal (340 l)
Hydraulic System Fluid Capacity18 gal (68 l)
Oil System Fluid Capacity6 gal (23 l)
Operating Voltage24 V V
Rear Diff/Final Drive Fluid Capacity13 gal (47 l)
Std Operation Weight - Front Axle7,880 lbs (3,574 kg)
Std Operation Weight - Rear Axle19,720 lbs (8,945 kg)
Std Operation Weight - Total25,040 lbs (11,358 kg)
Tandem Case Fluid Capacity (each)13 gal (49 l)
Tire Size13-24 (10 PR) (G-2)
Steering System
Articulation Angle20 °
Turning Radius24 ft (7 m)
Max Speed - Forward27 mph (43 kph)
Max Speed - Reverse21 mph (34 kph)
Number of Gears - Forward8
Number of Gears - Reverse6
Transmission Typedirect drive, powershift

Dealer Contact Info:

JJ Kane Auctioneers

Click for Phone Number

ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo