| Blades |
| Blade Tip Range - Backward | 5 |
| Blade Tip Range - Forward | 40 |
| Circle Centershift - Left | 26 |
| Circle Centershift - Right | 26 |
| Maximum Blade Position Angle | 90 |
| Maximum Depth of Cut | 28 |
| Maximum Lift Above Ground | 17 |
| Maximum Shoulder Reach Outside of Tires - Left | 69 |
| Maximum Shoulder Reach Outside of Tires - Right | 75 |
| Moldboard Sideshift - Left | 20 |
| Moldboard Sideshift - Right | 26 |
| Circle |
| Blade Tip Angle - Front | 40 |
| Blade Tip Angle - Rear | 5 |
| Diameter | 60 |
| Max Lift Above Ground | 17 |
| Max Reach Outside Tires - Left | 69 |
| Max Reach Outside Tires - Right | 75 |
| Shift Left | 26 |
| Shift Right | 26 |
| Dimensions |
| Blade Base | 8 |
| Front Ground Clearance | 2 |
| Ground Clearance - Rear Axle | 14 |
| Height - Exhaust Stack | 112 |
| Height - Front Axle Center | 23 |
| Height - Top of Cab | 11 |
| Height - Top of Cylinders | 114 |
| Height to Top of Isomount Cab | 11 |
| Length - Between Tandem Axles | 60 |
| Length - Counterweight to Ripper | 389 |
| Length - Front Axle to Mid Tandem | 233 |
| Length - Front Axle to Moldboard | 99 |
| Length - Front Tire to Rear of Machine | 334 |
| Overall Length | 28 |
| Rear Ground Clearance | 1 |
| Tandem Axle Wheelbase | 5 |
| Wheelbase | 19 |
| Width - Outside Front Tires | 98 |
| Width - Outside Rear Tires | 98 |
| Width - Tire Center Lines | 84 |
| Width Over Tires | 8 |
| Engine |
| Base Power (1st Gear) - Net | 138 |
| Base Power (1st Gear) - Net - Metric | 140 |
| Base Power (All Gears) - Net | 138 |
| Bore | 4 |
| Derating Altitude | 11,500 |
| Displacement | 403 |
| Emissions | U.S. EPA Tier 3/EU Stage IIIA equivalent |
| Engine Model | Cat C6.6 ACERT |
| High - Ambient Capability | 122 |
| High Ambient - Fan Speed - Maximum | 1,650 |
| High Ambient - Fan Speed - Minimum | 600 |
| Max Power | 138 |
| Maximum Torque | 690 |
| Net Power Gears 7-8 | 138 |
| Number of Cylinders | 6 |
| Power Measured @ | 2,000 |
| Speed at Rated Power | 2,000 |
| Standard - Ambient Capability | 109 |
| Standard - Fan Speed - Maximum | 1,150 |
| Standard - Fan Speed - Minimum | 600 |
| Stroke | 5 |
| Torque Rise - VHP Plus | 40% |
| VHP Plus Range - Net | 103-136 kW (138-182) |
| VHP Plus Range - Net - Metric | 103-136 kW (140-185) |
| VHP Range - Net | 103-114 kW (138-153) |
| Frame |
| Circle - Blade Beam Thickness | 1 |
| Circle - Diameter | 60 |
| Drawbar - Height | 6 |
| Drawbar - Thickness | 0 |
| Drawbar - Width | 3 |
| Front Axle - Height to Center | 23 |
| Front Axle - Total Oscillation per Side | 32 |
| Front Axle - Wheel Lean - Left/Right | 18 |
| Front Frame Structure - Height | 1 |
| Front Frame Structure - Width | 1 |
| Front Axle |
| Ground Clearance | 2 |
| Oscillation - Total | 32 |
| Wheel Lean | 18 |
| Hydraulic System |
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum System Pressure | 3,500 |
| Pump Flow | 40 |
| Pump Output | 40 |
| Pump Type | Variable piston |
| Relief Valve Pressure | 3,500 |
| Standby Pressure | 450 |
| Moldboard |
| Arc Radius | 16 |
| Blade Down Pressure | 28,887 |
| Blade Down Pressure - Base GVW | 16,435 |
| Blade Down Pressure - Maximum GVW | 29,125 |
| Blade Pull - Base GVW | 20,350 |
| Blade Pull - Maximum GVW | 24,218 |
| Blade Pull at Max Weight | 40,221 |
| Blade Width | 12 |
| Cutting Edge Thickness | 1 |
| Cutting Edge Width | 6 |
| End Bit - Thickness | 1 |
| End Bit - Width | 6 |
| Max Depth of Cut | 28 |
| Moldboard - Height | 24 |
| Moldboard - Thickness | 1 |
| Moldboard - Width | 12 |
| Moldboard Height | 24 |
| Moldboard Length | 12 |
| Moldboard Thickness | 1 |
| Moldboard Width | 12 |
| Side Shift Left | 20 |
| Side Shift Right | 26 |
| Throat Clearance | 5 |
| Operating Specifications |
| Articulation Angle - Left/Right | 20 |
| Circle Gearbox Fluid Capacity | 2 |
| Cooling System Fluid Capacity | 10 |
| Forward - 1st | 2 |
| Forward - 2nd | 3 |
| Forward - 3rd | 5 |
| Forward - 4th | 7 |
| Forward - 5th | 10 |
| Forward - 6th | 14 |
| Forward - 7th | 19 |
| Forward - 8th | 28 |
| Fuel Capacity | 90 |
| Hydraulic System Fluid Capacity | 16 |
| Max Operation Weight - Front Axle | 16,312 |
| Max Operation Weight - Rear Axle | 28,378 |
| Max Operation Weight - Total | 44,690 |
| Operating Weight | 31,069 |
| Rear Diff/Final Drive Fluid Capacity | 13 |
| Reverse - 1st | 2 mph |
| Reverse - 2nd | 4 |
| Reverse - 3rd | 6 |
| Reverse - 4th | 9 |
| Reverse - 5th | 16 |
| Reverse - 6th | 24 |
| Std Operation Weight - Front Axle | 8,233 |
| Std Operation Weight - Rear Axle | 22,836 |
| Std Operation Weight - Total | 31,069 |
| Steering Range - Left/Right | 47.5 |
| Tandem Case Fluid Capacity (each) | 17 |
| Top Speed - Forward | 28 |
| Top Speed - Reverse | 24 |
| Turning Radius - Outside Front Tires | 25 |
| Power Train |
| Brakes - Parking | Multiple oil disc |
| Brakes - Secondary | Dual circuit control system |
| Brakes - Service | Multiple oil-disc |
| Brakes - Service - Surface Area | 3,565 |
| Forward/Reverse Gears | 8 Fwd / 6 Rev |
| Transmission | Direct drive, power shift, countershaft |
| Ripper |
| Machine Length Increase, Beam Raised | 39 |
| Penetration Force | 17,705 |
| Pry-Out Force | 26,303 |
| Ripper Shank Holder Spacing | 21 |
| Ripper Shank Holders | 5 |
| Ripping Depth - Maximum | 17 |
| Scarifier |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 5 |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18 |
| Front, V-Type, 5 or 11 Tooth - Working Width | 47 |
| Mid, Straight - Scarifier Shank Holder Spacing | 4 |
| Mid, Straight - Scarifier Shank Holders | 17 |
| Mid, Straight - Scarifying Depth, Maximum | 13 |
| Mid, Straight - Working Width | 71 |
| Mid, V-Type - Scarifier Shank Holder Spacing | 5 |
| Mid, V-Type - Scarifier Shank Holders | 11 |
| Mid, V-Type - Scarifying Depth, Maximum | 12 |
| Mid, V-Type - Working Width | 47 |
| Rear - Scarifier Shank Holder Spacing | 11 |
| Rear - Scarifier Shank Holders | 9 |
| Rear - Scarifying Depth, Maximum | 11 |
| Rear - Working Width | 91 |
| Service Refill |
| Circle Drive Housing | 2 |
| Cooling System | 9 |
| Engine Oil | 4 |
| Front Wheel Spindle Bearing Housing | 0 |
| Fuel Capacity | 90 |
| Hydraulic System - Tank | 17 |
| Tandem Housing - Each | 16 |
| Transmission - Differential - Final Drives | 17 |
| Standards |
| Brakes | ISO 3450:1996 |
| ROPS/FOPS | ISO 3471:1992 / ISO 3449:1992 |
| Sound | ISO 6394:1998 / ISO 6395:1988 |
| Steering | ISO 5010:1992 |
| Steering System |
| Articulation Angle | 20 |
| Turning Radius | 25 |
| Tandems |
| Drive Chain Pitch | 2 |
| Height | 20 |
| Sidewall Thickness - Inner | 1 |
| Sidewall Thickness - Outer | 1 |
| Tandem Oscillation - Front Down | 25 |
| Tandem Oscillation - Front Up | 15 |
| Wheel Axle Spacing | 60 |
| Width | 7 |
| Transmission |
| Max Speed - Forward | 28 |
| Max Speed - Reverse | 24 |
| Number of Gears - Forward | 8 |
| Number of Gears - Reverse | 6 |
| Transmission Type | direct drive, power shift, countershaft |
| Weights |
| Gross Vehicle Weight - Base - Front Axle | 9,303 |
| Gross Vehicle Weight - Base - Rear Axle | 26,479 |
| Gross Vehicle Weight - Base - Total | 35,783 |
| Gross Vehicle Weight - Maximum - Front Axle | 15,077 |
| Gross Vehicle Weight - Maximum - Rear Axle | 33,523 |
| Gross Vehicle Weight - Maximum - Total | 48,601 |
| Gross Vehicle Weight - Typically Equipped - Front Axle | 11,221 |
| Gross Vehicle Weight - Typically Equipped - Total | 40,565 |
| Operating Weight - Typically Equipped | 40,565 |
