List and Sell Your Equipment  /  Dealer Login  /  Create Account

1983 Caterpillar 12G For Sale in Cedar Rapids, IA



For Sale: $52,000.00 USD

Apply for Financing

Altorfer Cat



Contact: Wm. E. Musgrave

Click for Phone Number

Machine Info:

Hours:2776
Serial Number:61M10338
Stock Number:218U024
Machine Location:CEDAR RAPIDS, IA 52404

Description:

AIR DRYERBEACONBLADE EXTENSIONCIRCLE CLUTCHCROSS SLOPEDEFROSTER FANDIFFERENTIAL LOCKEROPSLIGHTINGMIRRORSPRODUCT LINKSCARIFIERTHROTTLE LOCK12' MOLDBOARD

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenNo
Notes - GENERAL APPEARANCE - the machine is straight.
BumperGood
Cab or CanopyFair - is almost rusted through on the right lower panel.
DecalsGood
Draw BarGood
Fuel TankGood
Grab IronsGood
PaintGood - it has been repainted sometime.
Pre-Cleaner BowlGood
Sheet MetalGood
Steps / LadderGood
SAFETY ITEMS
ROPSNo
ROPS Certification PlateNo
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Dash ConsoleFair - the plastic is cracking, missing some plugs.
EMS Panel / WarningsGood
GaugesPoor - the plastic is all broken and hard to read, coolant temp gauge never moved.
Glass/MirrorsFair - right lower window has chip in it.
HeaterFair - it all worked, but has a lot of dirt build up in it.
Interior LightsGood
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersPoor - none of them worked.
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo - the front cover is collecting a little dirt.
Water in OilNo
Notes - ENGINE - the eng ran good, and started good.
Oil Pressure (H/L/N) - Good
Air CleanersGood
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
COOLING SYSTEM
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterYes
Ether AidYes
Signal LightsYes
AlternatorGood
Batteries / CablesGood
StarterFair - it is leaking trans oil.
WiringFair - has been patched and spliced.
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
Case - TRANSMISSIONGood
Controls - TRANSMISSIONGood
CoolerGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood
SealsGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Articulate P & BFair - the there is movement in the hitch.
King PinsGood
Steering CylinderFair - right side cylinder is wet.
Steering LinkageGood
Tie Rods / Rod EndsGood
Wheel Lean Cylinder - STEERINGFair - little wetness on the rod.
BRAKE
Brake LinkageGood
CompressorFair - pushing oil into the air system, the dryer is blowing oil out when it pops off.
Control ValveGood
LinesGood
DRIVECHAIN / TANDEMS
Wheel Lugs & RimsGood
HYDRAULICS
Leaks - HYDRAULICSYes
Circle Drive BoxGood
Circle Side Shift CylinderGood
Hydraulic PumpGood
Lift CylindersGood
LinkageFair - there is play in the linkage.
Side Shift CylinderGood
Tip CylinderGood
BLADE
Circle A FrameGood
Face / MoldboardGood
SCARIFER
Brackets / Studs - SCARIFERGood
Lines / Fittings - SCARIFERGood
Pins & Bushings - SCARIFERFair - all 4 pivot points have a good amount of movement.
TIRES
Average Life Remaining - TIRES - 10
Tire Size - TIRES - 14.00-24
Left Front
Left Rear
Right Front
Right Rear
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - the machine is a pretty clean machine for its age.


Specs from the manufacturer:

Circle
Blade Tip Angle - Front90 °
Blade Tip Angle - Rear90 °
Diameter60 in (153 cm)
Max Lift Above Ground17 in (44 cm)
Max Reach Outside Tires - Left72 in (183 cm)
Max Reach Outside Tires - Right74 in (187 cm)
Rotation360 °
Dimensions
Blade Base9 ft (3 m)
Height to Top of Isomount Cab11 ft (3 m)
Overall Length27 ft (8 m)
Tandem Axle Wheelbase5 ft (2 m)
Wheelbase20 ft (6 m)
Width Over Tires8 ft (2 m)
Engine
Displacement641 cu in (0 m)
Max Power135 hp (101 kw)
Net Power Gear 5-6135 hp (101 kw)
Number of Cylinders6
Power Measured @2,200 rpm
Front Axle
Ground Clearance2 ft (1 m)
Oscillation - Total32 °
Wheel Lean18 °
Hydraulic System
Pump Flow51 gal/min (193 l/min)
Pump Typeclosed-center, constant-pressure system w/ variable displacement piston
Relief Valve Pressure2,150 psi
Moldboard
Max Depth of Cut18 in (45 cm)
Moldboard Height24 in (61 cm)
Moldboard Thickness1 in (2 cm)
Moldboard Width12 ft (4 m)
Side Shift Left26 in (67 cm)
Side Shift Right21 in (52 cm)
Operating Specifications
Alternator Supplied Amperage19 A
Cooling System Fluid Capacity13 gal (47 l)
Fuel Capacity75 gal (283 l)
Hydraulic System Fluid Capacity20 gal (76 l)
Max Operation Weight - Front Axle9,987 lbs (4,530 kg)
Max Operation Weight - Rear Axle21,605 lbs (9,800 kg)
Max Operation Weight - Total31,592 lbs (14,330 kg)
Oil System Fluid Capacity8 gal (29 l)
Operating Voltage24 V V
Std Operation Weight - Front Axle7,871 lbs (3,570 kg)
Std Operation Weight - Rear Axle20,128 lbs (9,130 kg)
Std Operation Weight - Total27,999 lbs (12,700 kg)
Tandem Case Fluid Capacity (each)17 gal (64 l)
Transmission Fluid Capacity23 gal (87 l)
Steering System
Articulation Angle50 °
Turning Radius24 ft (7 m)
Transmission
Max Speed - Forward26 mph (41 kph)
Max Speed - Reverse26 mph (41 kph)
Number of Gears - Forward6
Number of Gears - Reverse6
Transmission TypeCat-built direct drive power shift

Dealer Contact Info:

Altorfer Cat

Fax: 319-365-5639



Contact: Wm. E. Musgrave

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo