# 1998 Caterpillar 160H for Sale in Denver, Co **URL:** ## Listing details - **Price:** Auction pricing - **Listing ID:** 89408507 - **Year:** 1998 - **Manufacturer:** Caterpillar - **Model:** 160H - **Category:** Motor Graders - **Hours:** 866 - **Serial number:** 9EJ00688 - **Location:** Denver, Co - **Auction starts:** 2026-10-21 ## Description Located in Lane 4 Spot 8, Enclosed Cab, Rear View Camera, Push Block, Ripper, 17.5R25 Tires Selling from a Temporary Offsite Location in Spokane, WA - Must be removed/picked up by November 5th, 2026 ## Manufacturer specifications ### Circle - **Blade Tip Angle - Front:** 40 degrees - **Blade Tip Angle - Rear:** 5 degrees - **Max Lift Above Ground:** 17.8 in (45.21 cm) - **Max Reach Outside Tires - Left:** 87.6 in (222.5 cm) - **Max Reach Outside Tires - Right:** 89.1 in (226.31 cm) - **Shift Left:** 33.4 in (84.84 cm) - **Shift Right:** 34.7 in (88.14 cm) ### Dimensions - **Blade Base:** 8.27 ft (2.52 m) - **Height:** 10.1667 ft (3.1 m) - **Height:** 11 ft (3.35 m) - **Height To Top Of Isomount Cab:** 10.24 ft (3.12 m) - **Height To Top Of Isomount Cab:** 11.02 ft (3.36 m) - **Length:** 28.1667 ft (8.59 m) - **Length:** 33.0833 ft (10.08 m) - **Overall Length:** 33.13 ft (10.1 m) - **Overall Length:** 28.22 ft (8.6 m) - **Tandem Axle Wheelbase:** 5 ft (1.52 m) - **Weight:** 34361 lbs (15585.91 kg) - **Weight:** 34360 lbs (15585.45 kg) - **Wheelbase:** 19.99 ft (6.09 m) - **Wheelbase:** 20.24 ft (6.17 m) - **Width:** 8.0833 ft (2.46 m) - **Width Over Tires:** 8.08 ft (2.46 m) - **Width Over Tires:** 8.14 ft (2.48 m) ### Engine - **Displacement:** 637.7 cu in (10450.05 cu cm) - **Displacement:** 628.6 cu in (10300.93 cu cm) - **Engine Make:** 2236 - **Engine Model:** 3176C ATAAC - **Engine Model:** 3306 DITA - **Max Power:** 200 hp (149.14 kw) - **Net Power Gear 1-2:** 180 hp (134.23 kw) - **Net Power Gear 4-6:** 180 hp (134.23 kw) - **Net Power Gear 4-6:** 200 hp (149.14 kw) - **Net Power Gear 5-6:** 200 hp (149.14 kw) - **Net Power Gears 7-8:** 200 hp (149.14 kw) - **Net Torque Gears 7-8:** 840.9 lbs ft (1140.09 nm) - **Number Of Cylinders:** 6 - **Power Measured @:** 2000 rpm - **Torque Measured @:** 1000 rpm ### Front Axle - **Oscillation - Total:** 32 degrees - **Wheel Lean:** 18 degrees ### Hydraulic System - **Pump Flow:** 54.5 gpm (206.28 lpm) - **Pump Flow:** 68.7 gpm (260.03 lpm) - **Pump Type:** Axial Piston - **Relief Valve Pressure:** 3500 psi - **Relief Valve Pressure:** 3502.7 psi ### Moldboard - **Blade Down Pressure:** 30441.5 lbs (13808.05 kg) - **Blade Pull At Max Weight:** 44249 lbs (20071.03 kg) - **Max Depth Of Cut:** 30.4 in (77.22 cm) - **Moldboard Height:** 27.1 in (68.83 cm) - **Moldboard Thickness:** 1 in (2.54 cm) - **Moldboard Width:** 23.9 ft (7.28 m) - **Moldboard Width:** 14 ft (4.27 m) - **Side Shift Left:** 33.6 in (85.34 cm) - **Side Shift Right:** 37.2 in (94.49 cm) ### Operational - **Alternator Supplied Amperage:** 35 amps - **Alternator Supplied Amperage:** 50 amps - **Circle Gearbox Fluid Capacity:** 1.9 gal (7.19 l) - **Cooling System Fluid Capacity:** 10.1 gal (38.23 l) - **Fuel Capacity:** 90.1 gal (341.03 l) - **Fuel Capacity:** 104.9 gal (397.05 l) - **Hydraulic System Fluid Capacity:** 21.2 gal (80.24 l) - **Max Operation Weight - Front Axle:** 18322.7 lbs (8311.05 kg) - **Max Operation Weight - Rear Axle:** 33003.2 lbs (14970.02 kg) - **Max Operation Weight - Total:** 51325.9 lbs (23281.07 kg) - **Operating Voltage:** 24 V - **Rear Diff/Final Drive Fluid Capacity:** 12.5 gal (47.31 l) - **Std Operation Weight - Front Axle:** 10117.1 lbs (4589.05 kg) - **Std Operation Weight - Rear Axle:** 25774.3 lbs (11691.04 kg) - **Std Operation Weight - Total:** 35891.3 lbs (16280.04 kg) - **Std Operation Weight - Total:** 34361.3 lbs (15586.04 kg) - **Tandem Case Fluid Capacity (Each):** 17 gal (64.35 l) - **Tire Size:** 14-24 12PR (G-2) - **Tire Size:** 10-24 12PR ### Steering - **Articulation Angle:** 20 degrees - **Turning Radius:** 24.3 ft (7.41 m) ### Transmission - **Max Speed - Forward:** 27.1 mph (43.61 kph) - **Max Speed - Forward:** 25.3 mph (40.72 kph) - **Max Speed - Reverse:** 20 mph (32.19 kph) - **Max Speed - Reverse:** 21.4 mph (34.44 kph) - **Number Of Gears - Forward:** 8 - **Number Of Gears - Reverse:** 6 ## About this model The Caterpillar 160H is a motor grader designed for road construction, maintenance, and earthmoving applications. It is part of Caterpillar's H-series grader lineup and is commonly used for grading, ditching, slope work, and surface finishing on highways, municipal roads, and job sites. The 160H typically features a diesel engine, articulated frame, hydraulic blade controls, and a moldboard for precise material shaping. It is known for balanced performance, operator visibility, and serviceability in grading operations. The Caterpillar 160H remains a widely recognized machine in the used equipment market for contractors, municipalities, and infrastructure maintenance fleets. ## Photos ![1998 Caterpillar 160H](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/0f3742b6-9eaa-4355-829a-9b4ddb077710-hr.jpg) ![1998 Caterpillar 160H photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/91f75a5a-c3e1-4e56-a26f-110838524e41-hr.jpg) ![1998 Caterpillar 160H photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/6cf3dfb7-c97d-4a0b-a9f4-b9574de8166f-hr.jpg) ![1998 Caterpillar 160H photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/70fd51d3-5301-4c89-91b3-6f51e4e8ef8b-hr.jpg) ![1998 Caterpillar 160H photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/41afb539-0881-425b-8a4b-cb98ac579c06-hr.jpg) ![1998 Caterpillar 160H photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/bf256403-1319-4761-b72f-8ccadbd8145d-hr.jpg) ![1998 Caterpillar 160H photo 7](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/a5b1dd1d-285a-4b1f-8964-d05c11cc935c-hr.jpg) ![1998 Caterpillar 160H photo 8](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23167/771/616951c1-f89b-4e57-9705-373192d573f1-hr.jpg)