2017 Caterpillar 160M3AWD For Sale in Billings, MT



For Sale: $316,200.00 USD



Machine Info:

Hours:4250
Serial Number:N9T00225
Stock Number:20G0267
Machine Location:BILLINGS MT, 59101

Description:

TIRES,17.5R25 MX XSNO+ * G2 MPFENDERS, FRONT, AWDLIFT GROUP, FRONT MOUNTINGLINES, RIPPER, ADDITIONALBUNDLED,RIPPER,PARTIAL INSTALLFENDERS, REARLIGHT, LED WARNING STROBELANE 3 ORDERSTARTER, ELEC, EXTREME DUTYSNOW ARRANGEMENTBASE+6(WM,WT+F,DA1,DA2,FL,RIP)MIRRORS, OUTSIDE HEATED 24VPRODUCT LINK, SATELLITE PLE631RIPPER/SCARIFIERLIGHTS, SERVICE, INTERNALCAB, PLUS (STANDARD GLASS)GLOBAL ARRANGEMENT,LOW AMBIENTDOMESTIC TRUCK*LIGHTS, FRONT HEADLIGHTS, HIGHACCUMULATORS, BLADE LIFT*TRANSMISSION, AUTOSHIFTCAB, PLUS (INTERIOR)CAMERA, REAR VISIONDRAIN, GRAVITY, ENGINE OILLANGUAGE, ENGLISHSEAT BELT*MOUNTING, WARNING LIGHTARTICULATION GUARDDECALS, ENGLISH (U.S.)*LIGHTS, WORKING, PLUSHEATER, ENGINE COOLANT, 120VCOOLANT, 50/50, -35C (-31F)*MOUNT, SNOW WING, FRAME READYPRECLEANER, SY-KLONECONTROL, INDUCEMENT OVERRIDEMSO ADTLY ENG S/N SYE18792CONTROLS, PERFORMANCE BUNDLECOLD WEATHER PLUS PACKAGE AWDMOLDBOARD, 16 FT

Machine Details:

TIRES
Left Front
Left Rear
Right Front
Right Rear
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - All tires meet repurchase conditions- no damage-good glass
comment 2 - One ripper shank missing (two shanks on 5-13-2020 at 4250 hours) Williston west store.


Specs from the manufacturer:

Blades
Maximum Shoulder Reach Outside of Tires - Left82 in (208 cm)
Maximum Shoulder Reach Outside of Tires - Right90 in (229 cm)
Moldboard Sideshift - Left32 in (81 cm)
Moldboard Sideshift - Right37 in (94 cm)
Circle
Blade Tip Angle - Front40 °
Blade Tip Angle - Rear5 °
Diameter61 in (155 cm)
Max Lift Above Ground18 in (45 cm)
Max Reach Outside Tires - Left82 in (209 cm)
Max Reach Outside Tires - Right90 in (228 cm)
Shift Left27 in (70 cm)
Shift Right29 in (73 cm)
Dimensions
Blade Base9 ft (3 m)
Front Ground Clearance2 ft (1 m)
Height to Top of Isomount Cab11 ft (3 m)
Overall Length29 ft (9 m)
Rear Ground Clearance1 ft (0 m)
Tandem Axle Wheelbase5 ft (2 m)
Wheelbase20 ft (6 m)
Width Over Tires8 ft (3 m)
Engine
Base Power (1st Gear) - Net213 hp (159 kw)
Displacement537 cu in (0 m)
Engine ModelC9 ACERT VHP
Max Power213 hp (159 kw)
Net Power Gears 7-8213 hp (159 kw)
Net Torque Gears 7-8912 lbs/ft
Number of Cylinders6
Power Measured @2,000 rpm
Torque Measured @2,000 rpm
Front Axle
Ground Clearance2 ft (1 m)
Oscillation - Total32 °
Wheel Lean18 °
Hydraulic System
Pump Flow56 gal/min (211 l/min)
Pump Typevariable piston
Relief Valve Pressure3,500 psi
Moldboard
Blade Pull at Max Weight32,904 lbs (14,925 kg)
Max Depth of Cut30 in (75 cm)
Moldboard Height27 in (69 cm)
Moldboard Length14 ft (4 m)
Moldboard Thickness1 in (3 cm)
Moldboard Width14 ft (4 m)
Side Shift Left32 in (82 cm)
Side Shift Right37 in (95 cm)
Operating Specifications
Circle Gearbox Fluid Capacity2 gal (7 l)
Cooling System Fluid Capacity11 gal (40 l)
Fuel Capacity105 gal (397 l)
Hydraulic System Fluid Capacity17 gal (64 l)
Max Operation Weight - Front Axle18,478 lbs (8,382 kg)
Max Operation Weight - Rear Axle34,317 lbs (15,566 kg)
Max Operation Weight - Total52,795 lbs (23,948 kg)
Operating Weight 35,060 lbs (15,903 kg)
Rear Diff/Final Drive Fluid Capacity17 gal (65 l)
Std Operation Weight - Front Axle9,677 lbs (4,390 kg)
Std Operation Weight - Rear Axle25,383 lbs (11,514 kg)
Std Operation Weight - Total35,060 lbs (15,903 kg)
Tandem Case Fluid Capacity (each)21 gal (80 l)
Steering System
Articulation Angle20 °
Turning Radius25 ft (8 m)
Transmission
Max Speed - Forward30 mph (47 kph)
Max Speed - Reverse23 mph (37 kph)
Number of Gears - Forward8
Number of Gears - Reverse6
Transmission Typedirect drive, power shift, countershaft

Dealer Contact Info:

Tractor and Equipment CAT


Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo