# 2014 Caterpillar 160M2 **URL:** > This machine has been sold or is not currently for sale. ## Listing details - **Price:** Sold - **Listing ID:** 89538630 - **Year:** 2014 - **Manufacturer:** Caterpillar - **Model:** 160M2 - **Category:** Motor Graders - **Hours:** 9211 - **Serial number:** CAT0160MCR9T00328 - **Location:** Edmonton, Ab - **Auction starts:** 2026-11-03 ## Description Located in Lane 4 Spot 15, Enclosed Cab, Air Conditioner, Air Ride Seat, Rear View Camera, Differential Lock, Pre-Wired for Grade Control, 16 ft / 4.88 m Moldboard, Front Auxiliary Hydraulics, Lift Group, Straight Front Blade, Snow Wing Mounts, Rear Auxiliary Hydraulics, 17.5R25 Tires Emissions altered, see deficiencies - Additional information available - Work order(s) Closing Time: 2026-11-03 09:43:30 AM ## Manufacturer specifications ### Blade Range - **Blade Tip Range - Backward:** 5 degrees - **Blade Tip Range - Forward:** 40 degrees - **Circle Centershift - Left:** 27.4 in (69.6 cm) - **Circle Centershift - Right:** 28.7 in (72.9 cm) - **Maximum Blade Position Angle:** 90 degrees - **Maximum Depth Of Cut:** 29.5 in (74.93 cm) - **Maximum Lift Above Ground:** 17.8 in (45.21 cm) - **Maximum Shoulder Reach Outside Of Tires - Left:** 82.3 in (209.04 cm) - **Maximum Shoulder Reach Outside Of Tires - Right:** 89.7 in (227.84 cm) - **Moldboard Sideshift - Left:** 20.1 in (51.05 cm) - **Moldboard Sideshift - Right:** 26 in (66.04 cm) ### Circle - **Blade Tip Angle - Front:** 40 degrees - **Blade Tip Angle - Rear:** 5 degrees - **Diameter:** 60.3 in (153.16 cm) - **Max Lift Above Ground:** 17.8 in (45.21 cm) - **Max Reach Outside Tires - Left:** 82.3 in (209.04 cm) - **Max Reach Outside Tires - Right:** 89.7 in (227.84 cm) - **Rotation:** 360 degrees - **Shift Left:** 27.4 in (69.6 cm) - **Shift Right:** 28.7 in (72.9 cm) ### Dimensions - **Blade Base:** 8.39 ft (2.56 m) - **Front Ground Clearance:** 1.97 ft (0.6 m) - **Height:** 10.75 ft (3.28 m) - **Height To Top Of Isomount Cab:** 10.79 ft (3.29 m) - **Length:** 29.1667 ft (8.89 m) - **Overall Length:** 29.2 ft (8.9 m) - **Rear Ground Clearance:** 1.13 ft (0.34 m) - **Tandem Axle Wheelbase:** 5 ft (1.52 m) - **Weight:** 45283 lbs (20540.05 kg) - **Wheelbase:** 20.1 ft (6.13 m) - **Width:** 8.1667 ft (2.49 m) - **Width Over Tires:** 8.47 ft (2.58 m) ### Engine - **Awd Range - Net:** 166-211 kW (223-283 hp) - **Awd Range - Net - Metric:** 166-211 kW (226-287 hp) - **Base Power (1st Gear) - Net:** 213 hp (158.84 kw) - **Base Power (1st Gear) - Net - Metric:** 216 hp (161.07 kw) - **Base Power (All Gears) - Net:** 213 hp (158.84 kw) - **Bore:** 4.5 in (11.43 cm) - **Derating Altitude:** 10000 ft (3048 m) - **Emissions:** U.S. Tier 4 Interim/EU Stage IIIB - **Engine Make:** 2236 - **Engine Model:** Cat C9.3 ACERT - **High - Ambient Capability:** 122 degrees - **High Ambient - Fan Speed - Maximum:** 1,550 rpm - **High Ambient - Fan Speed - Minimum:** 500 rpm - **High Ambient - Fan Speed - Standard:** 1,400 rpm - **Maximum Torque:** 1000 lbs ft (1355.8 nm) - **Net Power Gears 7-8:** 243 hp (181.21 kw) - **Net Torque Gears 7-8:** 1000 lbs ft (1355.8 nm) - **Number Of Cylinders:** 6 - **Power Measured @:** 2100 rpm - **Speed At Rated Power:** 2,100 rpm - **Standard Capability:** 109 degrees - **Stroke:** 5.9 in (14.99 cm) - **Torque Measured @:** 2100 rpm - **Vhp Plus - Gear 1f, Net:** 213 hp (158.84 kw) - **Vhp Plus - Gear 2f, Net:** 223 hp (166.29 kw) - **Vhp Plus - Gear 3f, Net:** 233 hp (173.75 kw) - **Vhp Plus - Gear 4f, Net:** 243 hp (181.21 kw) - **Vhp Plus - Gear 5f, Net:** 248 hp (184.94 kw) - **Vhp Plus - Gear 6f, Net:** 253 hp (188.67 kw) - **Vhp Plus - Gear 7f, Net:** 258 hp (192.39 kw) - **Vhp Plus - Gear 8f, Net:** 263 hp (196.12 kw) - **Vhp Plus Range - Net:** 159-196 kW (213-263 hp) - **Vhp Plus Range - Net - Metric:** 159-196 kW (216-267 hp) ### Frame - **Circle - Blade Beam Thickness:** 1.6 in (4.06 cm) - **Circle - Diameter:** 60.2 in (152.91 cm) - **Drawbar - Height:** 6 in (15.24 cm) - **Drawbar - Thickness:** 0.5 in (1.27 cm) - **Drawbar - Width:** 3 in (7.62 cm) - **Front Axle - Height To Center:** 23.6 in (59.94 cm) - **Front Axle - Total Oscillation Per Side:** 32 degrees - **Front Axle - Wheel Lean - Left/Right:** 18 degrees - **Front Frame Structure - Height:** 1.1 ft (0.34 m) - **Front Frame Structure - Width:** 0.9 ft (0.27 m) - **Front-Top/Bottom Plate - Thickness:** 0.9 in (2.29 cm) - **Front-Top/Bottom Plate - Width:** 12 in (30.48 cm) ### Front Axle - **Ground Clearance:** 2 ft (0.61 m) - **Oscillation - Total:** 32 degrees - **Wheel Lean:** 18 degrees ### General Specifications - **Base Power (since 2012):** 223 hp (166.29 kw) - **Base Power - Net (since 2012):** 213 hp (159 kW) - **Displacement (since 2012):** 567 cu in (9.3 L) - **Electrical - Std. Alternator (since 2012):** 150 - **Electrical - Std. Battery CCA @ 0° F (since 2012):** 1125 - **Electrical - System Size (since 2012):** 24V - **Engine Model (since 2012):** C9.3 ACERT VHP - **Engine Model (since 2015):** C9.3 ACERT - **Front Axle/Steering - Articulation Angle (since 2012):** 20 deg - **Front Axle/Steering - Minimum Turning Radius (since 2012):** 298 in (7.6 m) - **Front Axle/Steering - Minimum Turning Radius\*\* (since 2018):** 298 in (7.6 m) - **Front Axle/Steering - Oscillation Angle (since 2012):** 32 deg - **Front Axle/Steering - Steering Angle (since 2012):** 47.5 deg - **Front Axle/Steering - Wheel Lean Angle (since 2012):** 18 deg - **Front Axle/Steering - Wheel Lean Angle (since 2013):** 18.0 deg - **Fuel Tank Capacity (since 2012):** 110 US gal (416 L) - **GENERAL DIMENSIONS - Blade Base (since 2012):** 101 in (2557 mm) - **GENERAL DIMENSIONS - Blade Base (since 2015):** 100.5 in (2552 mm) - **GENERAL DIMENSIONS - Height (since 2012):** 24 in (610 mm) - **GENERAL DIMENSIONS - Height (to top of ROPS) (since 2012):** 130 in (3287 mm) - **GENERAL DIMENSIONS - Height (to top of ROPS) (since 2015):** 130.2 in (3308 mm) - **GENERAL DIMENSIONS - Lift Above Ground (since 2012):** 17.8 in (452 mm) - **GENERAL DIMENSIONS - Overal Width (at top of front tires) (since 2012):** 98 in (2493 mm) - **GENERAL DIMENSIONS - Overall Length (since 2012):** 350 in (8898 mm) - **GENERAL DIMENSIONS - Overall Length (since 2015):** 350.9 in (8912 mm) - **GENERAL DIMENSIONS - Overall Width (at top of front tires) (since 2013):** 98 in (2493 mm) - **GENERAL DIMENSIONS - Overall Width (at top of front tires) (since 2015):** 98.9 in (2511 mm) - **GENERAL DIMENSIONS - Standard Blade: Height (since 2013):** 24 in (610 mm) - **GENERAL DIMENSIONS - Standard Blade: Height (since 2015):** 24.0 in (610 mm) - **GENERAL DIMENSIONS - Standard Blade: Length (since 2012):** 144 in (3658 mm) - **GENERAL DIMENSIONS - Standard Blade: Length (since 2015):** 168 in (4267 mm) - **GENERAL DIMENSIONS - Standard Blade: Thickness (since 2013):** 0.87 in (22 mm) - **GENERAL DIMENSIONS - Thickness (since 2012):** 0.87 in (22 mm) - **GENERAL DIMENSIONS - Wheelbase (since 2012):** 241 in (6126 mm) - **GENERAL DIMENSIONS - Wheelbase (since 2015):** 241.1 in (6123 mm) - **GENERAL DIMENSIONS - With Ripper and Pushplate (since 2012):** 400 in (10140 mm) - **GENERAL DIMENSIONS - With Ripper and Pushplate (since 2015):** 399.1 in (10136 mm) - **Hydraulics - Implement Pressure: Max. (since 2012):** 3500 psi (24150 kPa) - **Hydraulics - Implement Pressure: Min. (since 2013):** 450 psi (3100 kPa) - **Hydraulics - Implement Pressure: Min. (since 2015):** 609 psi (4200 kPa) - **Hydraulics - Max. Pump Flow (since 2012):** 55.7 US gpm (210 L/min) - **Hydraulics - Min. (since 2012):** 450 psi (3100 kPa) - **Hydraulics - Pump Type (since 2012):** Variable Piston - **Hydraulics - Tank Capacity (since 2012):** 15.9 US gal (60 L) - **Hydraulics - Tank Capacity (since 2015):** 16.9 US gal (64 L) - **Interior Sound Level/SAE J919 (since 2012):** 71 dB(A - **Max. Shoulder Reach: - Frame Straight - left (since 2012):** 82.3 in (2090 mm) - **Max. Shoulder Reach: - Frame Straight - Left (since 2016):** 82.3 in (2090 mm) - **Max. Shoulder Reach: - Frame Straight - right (since 2012):** 89.7 in (2278 mm) - **Max. Shoulder Reach: - Frame Straight - Right (since 2016):** 89.7 in (2278 mm) - **Max. Shoulder Reach:\*\*\* - Frame Straight - Left (since 2018):** 82.3 in (2090 mm) - **Max. Shoulder Reach:\*\*\* - Frame Straight - Right (since 2018):** 89.7 in (2278 mm) - **Max. Torque (since 2012):** 1000 lb-ft (1354 N-m) - **Max. Torque (since 2015):** 1000 lb-ft (1355 N-m) - **Maximum Net Power with VHP+ (since 2012):** 283 hp (211.04 kw) - **No. Circle Support Shoes (since 2012):** 6 - **No. of Cylinders (since 2012):** 6 - **No. of Speeds Forward/Reverse (since 2012):** 8/6 - **Operating Weight (since 2012):** 38131 lbs (17296 kg) - **Operating Weight (since 2015):** 38443 lbs (17438 kg) - **Operating Weight - Typically Equipped (since 2012):** 45,221 lb - **Operating Weight\* (since 2018):** 38443 lbs (17438 kg) - **Rated Engine RPM (since 2012):** 2100 rpm - **Reverse (since 2012):** 23.3 mph (37.4 km/h) - **Standard Blade Length (since 2012):** 14 ft (4.27 m) - **Std. Tires - Front and Rear (since 2012):** 14.00R24 (G-2 - **Top Speed: Forward (since 2012):** 29.5 mph (47.4 km/h) - **Top Speed: Reverse (since 2013):** 23.3 mph (37.4 km/h) - **VHP Plus Range - Net (since 2012):** 213 - 263 hp (159 - 196 kW) - **VHP Range - Net (since 2012):** 213 - 243 hp (159 - 181 kW) ### Hydraulic System - **Circuit Type:** Parallel - **Maximum System Pressure:** 3503 psi - **Pump Flow:** 55.5 gpm (210.07 lpm) - **Pump Output:** 55.5 gpm (210.07 lpm) - **Pump Type:** Variable Piston - **Relief Valve Pressure:** 3503 psi - **Reservoir Tank Capacity:** 15.9 gal (60.18 l) - **Standby Pressure:** 609 psi ### Moldboard - **Arc Radius:** 16.3 in (41.4 cm) - **Blade Down Pressure:** 22884 lbs (10380.02 kg) - **Blade Down Pressure - Base Gvw:** 17171 lbs (7788.64 kg) - **Blade Down Pressure - Maximum Gvw:** 29195 lbs (13242.65 kg) - **Blade Pull - Base Gvw:** 25908 lbs (11751.69 kg) - **Blade Pull - Maximum Gvw:** 34072 lbs (15454.82 kg) - **Blade Pull At Max Weight:** 20044 lbs (9091.82 kg) - **Blade Width:** 14 ft (4.27 m) - **Cutting Edge Thickness:** 0.6 in (1.52 cm) - **Cutting Edge Width:** 6 in (15.24 cm) - **End Bit - Thickness:** 0.6 in (1.52 cm) - **End Bit - Width:** 6 in (15.24 cm) - **Max Depth Of Cut:** 29.6 in (75.18 cm) - **Moldboard - Height:** 24 in (60.96 cm) - **Moldboard - Thickness:** 0.9 in (2.29 cm) - **Moldboard Height:** 24 in (60.96 cm) - **Moldboard Thickness:** 0.9 in (2.29 cm) - **Moldboard Width:** 14 ft (4.27 m) - **Side Shift Left:** 20.1 in (51.05 cm) - **Side Shift Right:** 26 in (66.04 cm) - **Throat Clearance:** 6.5 in (16.51 cm) ### Operating Specifications - **Articulation Angle - Left/Right:** 20 degrees - **Forward - 1st:** 2.6 mph (4.18 kph) - **Forward - 2nd:** 3.5 mph (5.63 kph) - **Forward - 3rd:** 5.1 mph (8.21 kph) - **Forward - 4th:** 7 mph (11.27 kph) - **Forward - 5th:** 10.8 mph (17.38 kph) - **Forward - 6th:** 14.7 mph (23.66 kph) - **Forward - 7th:** 20.3 mph (32.67 kph) - **Forward - 8th:** 29.5 mph (47.48 kph) - **Reverse - 1st:** 2 mph (3.22 kph) - **Reverse - 2nd:** 3.8 mph (6.12 kph) - **Reverse - 3rd:** 5.5 mph (8.85 kph) - **Reverse - 4th:** 8.5 mph (13.68 kph) - **Reverse - 5th:** 16 mph (25.75 kph) - **Reverse - 6th:** 23.3 mph (37.5 kph) - **Steering Range - Left/Right:** 47.5 degrees - **Top Speed - Forward:** 29.5 mph (47.48 kph) - **Top Speed - Reverse:** 23.3 mph (37.5 kph) - **Turning Radius - Outside Front Tires:** 25 ft (7.62 m) ### Operational - **Alternator Supplied Amperage:** 150 amps - **Circle Gearbox Fluid Capacity:** 1.8 gal (6.81 l) - **Cooling System Fluid Capacity:** 14.8 gal (56.02 l) - **Fuel Capacity:** 110 gal (416.35 l) - **Hydraulic System Fluid Capacity:** 26.4 gal (99.92 l) - **Max Operation Weight - Front Axle:** 13343 lbs (6052.29 kg) - **Max Operation Weight - Rear Axle:** 36444 lbs (16530.74 kg) - **Max Operation Weight - Total:** 52795 lbs (23947.44 kg) - **Oil System Fluid Capacity:** 7.9 gal (29.9 l) - **Operating Voltage:** 24 V - **Std Operation Weight - Front Axle:** 9339 lbs (4236.1 kg) - **Std Operation Weight - Rear Axle:** 28792 lbs (13059.85 kg) - **Std Operation Weight - Total:** 38131 lbs (17295.95 kg) - **Tandem Case Fluid Capacity (Each):** 16.9 gal (63.97 l) - **Transmission Fluid Capacity:** 17.2 gal (65.1 l) ### Power Train - **Brakes - Parking:** Multiple Oil Disc - **Brakes - Secondary:** Dual Circuit Control - **Brakes - Service:** Multiple Oil Disc - **Brakes - Service - Surface Area:** 3565 in2 - **Forward/Reverse Gears:** 8 Fwd/6 Rev - **Transmission:** Direct Drive Powershift ### Ripper - **Machine Length Increase, Beam Raised:** 40.6 in (103.12 cm) - **Penetration Force:** 20443 lbs (9272.8 kg) - **Pry-Out Force:** 258201 lbs (117118.15 kg) - **Ripper Shank Holder Spacing:** 21 in (53.34 cm) - **Ripper Shank Holders:** 5 - **Ripping Depth - Maximum:** 16.8 in (42.67 cm) ### Scarifier - **Front, V-Type - Scarifier Shank Holder Spacing:** 18.4 in (46.74 cm) - **Front, V-Type - Scarifier Shank Holders:** 5/11 - **Front, V-Type - Scarifying Depth, Maximum:** 40.6 in (103.12 cm) - **Front, V-Type - Working Width:** 47.4 in (120.4 cm) - **Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holder Spacing:** 4.6 in (11.68 cm) - **Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holders:** 5/11 - **Front, V-Type, 5 Or 11 Tooth - Scarifying Depth, Maximum:** 18.4 in (46.74 cm) - **Front, V-Type, 5 Or 11 Tooth - Working Width:** 40.6 in (103.12 cm) - **Mid, Straight - Scarifier Shank Holder Spacing:** 4.4 in (11.18 cm) - **Mid, Straight - Scarifier Shank Holders:** 17 - **Mid, Straight - Scarifying Depth, Maximum:** 12.5 in (31.75 cm) - **Mid, Straight - Working Width:** 70.9 in (180.09 cm) - **Mid, V-Type - Scarifier Shank Holder Spacing:** 4.6 in (11.68 cm) - **Mid, V-Type - Scarifier Shank Holders:** 11 - **Mid, V-Type - Scarifying Depth, Maximum:** 11.5 in (29.21 cm) - **Mid, V-Type - Working Width:** 46.6 in (118.36 cm) - **Rear - Scarifier Shank Holder Spacing:** 10.5 in (26.67 cm) - **Rear - Scarifier Shank Holders:** 9 - **Rear - Scarifying Depth, Maximum:** 16.8 in (42.67 cm) - **Rear - Working Width:** 84 in (213.36 cm) ### Service Refill - **Circle Drive Housing:** 1.8 gal (6.81 l) - **Cooling System:** 14.8 gal (56.02 l) - **Engine Oil:** 7.9 gal (29.9 l) - **Front Wheel Spindle Bearing Housing:** 0.2 gal (0.76 l) - **Fuel Capacity:** 110 gal (416.35 l) - **Hydraulic System - Tank:** 16.9 gal (63.97 l) - **Hydraulic System - Total:** 26.4 gal (99.92 l) - **Tandem Housing - Each:** 16.9 gal (63.97 l) - **Transmission - Differential - Final Drives:** 17.2 gal (65.1 l) ### Standards - **Brakes:** ISO 3450, ISO 10265 - **Rops/Fops:** ISO 3471/ISO 3499 - **Sound:** ISO 6394; ISO 6395 - **Steering:** ISO 5010 ### Steering - **Articulation Angle:** 20 degrees - **Turning Radius:** 25.5 ft (7.77 m) ### Tandems - **Drive Chain Pitch:** 2 in (5.08 cm) - **Height:** 19.9 in (50.55 cm) - **Sidewall Thickness - Inner:** 0.7 in (1.78 cm) - **Sidewall Thickness - Outer:** 0.8 in (2.03 cm) - **Tandem Oscillation - Front Down:** 25 degrees - **Tandem Oscillation - Front Up:** 15 degrees - **Wheel Axle Spacing:** 60 in (152.4 cm) - **Width:** 8.3 in (21.08 cm) ### Transmission - **Max Speed - Forward:** 29 mph (46.67 kph) - **Max Speed - Reverse:** 22.9 mph (36.85 kph) - **Number Of Gears - Forward:** 8 - **Number Of Gears - Reverse:** 6 - **Transmission Type:** Direct Drive, Powershift ### Weights - **Gross Vehicle Weight - Base - Front Axle:** 10004 lbs (4537.74 kg) - **Gross Vehicle Weight - Base - Rear Axle:** 28786 lbs (13057.13 kg) - **Gross Vehicle Weight - Base - Total:** 38790 lbs (17594.87 kg) - **Gross Vehicle Weight - Maximum - Front Axle:** 17009 lbs (7715.16 kg) - **Gross Vehicle Weight - Maximum - Rear Axle:** 37860 lbs (17173.03 kg) - **Gross Vehicle Weight - Maximum - Total:** 54869 lbs (24888.19 kg) - **Operating Weight - Typically Equipped:** 45283 lbs (20540.05 kg) - **Operating Weight - Typically Equipped - Front Axle:** 13171 lbs (5974.27 kg) - **Operating Weight - Typically Equipped - Rear Axle:** 32112 lbs (14565.78 kg) - **Operating Weight - Typically Equipped - Total:** 45283 lbs (20540.05 kg) ## About this model The Caterpillar 160M2 is a motor grader designed for road construction, maintenance, and grading applications. It is part of Caterpillar's M Series lineup and is used for shaping surfaces, fine grading, ditching, and snow removal. The 160M2 typically features a diesel engine, articulated frame, moldboard blade, and hydraulic controls for precise blade positioning. It is commonly used by contractors, municipalities, and road maintenance crews on highways, rural roads, and site preparation projects. The machine is valued for its balance of maneuverability, visibility, and grading control in medium-duty earthmoving and surface finishing work. ## Photos ![2014 Caterpillar 160M2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/b2e2a44c-2df0-4769-8ce0-82e5a8bac414-hr.jpg) ![2014 Caterpillar 160M2 photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/4e448b8d-bad2-3941-9881-4d1da3b6d751-hr.jpg) ![2014 Caterpillar 160M2 photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/bd16ddce-5a97-3f88-b1da-6ad4eb953cd1-hr.jpg) ![2014 Caterpillar 160M2 photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/2c1b01a2-610d-3685-84fb-78a13878fb5f-hr.jpg) ![2014 Caterpillar 160M2 photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/8e5966f5-a82a-300a-8a10-874cf5583365-hr.jpg) ![2014 Caterpillar 160M2 photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/9595d147-be4a-4b63-9e4d-d2d389cb313d-hr.jpg) ![2014 Caterpillar 160M2 photo 7](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/5702bd97-b6ab-4839-b185-5fc0d33180cd-hr.jpg) ![2014 Caterpillar 160M2 photo 8](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/91db3745-d11b-4954-9d47-7cee1827c6e6-hr.jpg) ![2014 Caterpillar 160M2 photo 9](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23304/613/700bc01c-43c9-4633-859f-ffaecbe8c3da-hr.jpg)