# 2001 Caterpillar 16H **URL:** > This machine has been sold or is not currently for sale. ## Listing details - **Price:** Sold - **Listing ID:** 88950991 - **Year:** 2001 - **Manufacturer:** Caterpillar - **Model:** 16H - **Category:** Motor Graders - **Serial number:** CAT0016HV6ZJ00921 - **Location:** Fort Worth, Tx - **Auction starts:** 2026-09-16 ## Description Located in Lane 3 Spot 25, Enclosed Cab, Differential Lock, 16 ft / 4.88 m Moldboard, Push Block, Accumulators, Ripper, Fast Fuel System, 23.5R25 Tires Closing Time: 2026-09-16 10:55:48 AM ## Manufacturer specifications ### Circle - **Blade Tip Angle - Front:** 40 degrees - **Blade Tip Angle - Rear:** 5 degrees - **Diameter:** 71.8 in (182.37 cm) - **Max Lift Above Ground:** 16.5 in (41.91 cm) - **Max Reach Outside Tires - Left:** 91 in (231.14 cm) - **Max Reach Outside Tires - Right:** 91 in (231.14 cm) - **Shift Left:** 27.2 in (69.09 cm) - **Shift Right:** 22 in (55.88 cm) ### Dimensions - **Blade Base:** 10.08 ft (3.07 m) - **Front Ground Clearance:** 2.4 ft (0.73 m) - **Height:** 11.5 ft (3.51 m) - **Height To Top Of Isomount Cab:** 11.55 ft (3.52 m) - **Height To Top Of Isomount Cab:** 11.58 ft (3.53 m) - **Length:** 32.6667 ft (9.96 m) - **Overall Length:** 32.78 ft (9.99 m) - **Overall Length:** 32.79 ft (9.99 m) - **Rear Ground Clearance:** 1.34 ft (0.41 m) - **Tandem Axle Wheelbase:** 6 ft (1.83 m) - **Weight:** 54560 lbs (24748.03 kg) - **Wheelbase:** 22.84 ft (6.96 m) - **Wheelbase:** 22.83 ft (6.96 m) - **Width:** 10.0833 ft (3.07 m) - **Width Over Tires:** 10.08 ft (3.07 m) - **Width Over Tires:** 10.11 ft (3.08 m) ### Engine - **Displacement:** 891 cu in (14600.91 cu cm) - **Displacement:** 726 cu in (11897.03 cu cm) - **Engine Make:** 2236 - **Engine Model:** 3196 ETA - **Engine Model:** 3406 DITA - **Max Power:** 275 hp (205.07 kw) - **Max Power:** 285 hp (212.53 kw) - **Net Power Gear 1-2:** 265 hp (197.61 kw) - **Net Power Gear 4-6:** 285 hp (212.53 kw) - **Net Power Gear 5-6:** 285 hp (212.53 kw) - **Net Power Gears 7-8:** 275 hp (205.07 kw) - **Net Power Gears 7-8:** 285 hp (212.53 kw) - **Net Torque Gears 7-8:** 1143 lbs ft (1549.68 nm) - **Number Of Cylinders:** 6 - **Power Measured @:** 2000 rpm ### Front Axle - **Ground Clearance:** 2.4 ft (0.73 m) - **Oscillation - Total:** 32 degrees - **Wheel Lean:** 18 degrees ### Hydraulic System - **Pump Flow:** 66 gpm (249.81 lpm) - **Pump Flow:** 64.2 gpm (243 lpm) - **Pump Type:** axial piston - **Pump Type:** Axial Piston - **Relief Valve Pressure:** 3500 psi ### Moldboard - **Blade Down Pressure:** 34901.4 lbs (15831.03 kg) - **Blade Pull At Max Weight:** 45131 lbs (20471.1 kg) - **Max Depth Of Cut:** 18.5 in (46.99 cm) - **Moldboard Height:** 31 in (78.74 cm) - **Moldboard Thickness:** 1 in (2.54 cm) - **Moldboard Width:** 16 ft (4.88 m) - **Moldboard Width:** 16.1 ft (4.91 m) - **Side Shift Left:** 25.6 in (65.02 cm) - **Side Shift Right:** 31.1 in (78.99 cm) ### Operational - **Alternator Supplied Amperage:** 50 amps - **Alternator Supplied Amperage:** 75 amps - **Circle Gearbox Fluid Capacity:** 2.1 gal (7.95 l) - **Cooling System Fluid Capacity:** 12.3 gal (46.56 l) - **Fuel Capacity:** 130 gal (492.05 l) - **Hydraulic System Fluid Capacity:** 34.4 gal (130.2 l) - **Hydraulic System Fluid Capacity:** 34 gal (128.69 l) - **Max Operation Weight - Front Axle:** 19502 lbs (8845.97 kg) - **Max Operation Weight - Rear Axle:** 50146 lbs (22745.87 kg) - **Max Operation Weight - Total:** 69648 lbs (31591.84 kg) - **Operating Voltage:** 24 V - **Rear Diff/Final Drive Fluid Capacity:** 30.1 gal (113.93 l) - **Std Operation Weight - Front Axle:** 15397 lbs (6983.97 kg) - **Std Operation Weight - Rear Axle:** 39153 lbs (17759.52 kg) - **Std Operation Weight - Total:** 54560.1 lbs (24748.08 kg) - **Std Operation Weight - Total:** 54550 lbs (24743.49 kg) - **Tandem Case Fluid Capacity (Each):** 31.5 gal (119.23 l) - **Tire Size:** 15-25 12PR (E-2) ### Steering - **Articulation Angle:** 20 degrees - **Turning Radius:** 27 ft (8.23 m) ### Transmission - **Max Speed - Forward:** 29.9 mph (48.12 kph) - **Max Speed - Forward:** 27.7 mph (44.58 kph) - **Max Speed - Reverse:** 28.4 mph (45.71 kph) - **Max Speed - Reverse:** 26.3 mph (42.33 kph) - **Number Of Gears - Forward:** 8 - **Number Of Gears - Reverse:** 8 - **Transmission Type:** direct drive, power shift, planetary ## About this model The Caterpillar 16H is a heavy-duty motor grader designed for road construction, maintenance, and earthmoving applications. Built by Caterpillar, the 16H features a high-horsepower diesel engine, articulated frame, and moldboard blade for precise grading and surface shaping. It is commonly used in highway work, mining support, site preparation, and municipal road maintenance. The machine is known for its operator controls, traction, and blade control systems that support accurate material placement and finish grading. As part of Caterpillar's motor grader lineup, the 16H is suited for demanding grading tasks where durability, control, and consistent performance are required. ## Photos ![2001 Caterpillar 16H](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22662/824/15f70159-c5c9-4770-8058-ae56fdfe0627-hr.jpg) ![2001 Caterpillar 16H photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22662/824/559d8b22-23ea-492d-9081-d384b7127ccd-hr.jpg) ![2001 Caterpillar 16H photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22662/824/8e52a882-334f-4f76-8c57-96660ff85289-hr.jpg) ![2001 Caterpillar 16H photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22662/824/a0fb00da-48fd-42b0-9b75-0176ac8b8f16-hr.jpg) ![2001 Caterpillar 16H photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22662/824/675c75c9-66e4-4d0c-96dd-18375f2c11df-hr.jpg) ![2001 Caterpillar 16H photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22662/824/575f9e29-793b-4af6-b43f-8ccafeac9fd7-hr.jpg) ![2001 Caterpillar 16H photo 7](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22662/824/3da6f94b-adc9-4e10-8191-07dffe90c82b-hr.jpg)