# 2014 Caterpillar 725C for Sale in Grand Prairie, TX **URL:** ## Listing details - **Price:** $230,000.00 USD - **Listing ID:** 89176973 - **Year:** 2014 - **Manufacturer:** Caterpillar - **Model:** 725C - **Category:** Off-Highway Trucks - **Serial number:** TFB311 - **Location:** Grand Prairie, TX ## Description Standard Bed, Scissor Tailgate, Final Tier IV Engine, EROPS, A/C, Heater, 23.5Rx25 Tires ## Manufacturer specifications ### Body Capacities - **Heaped (Sae 2:1):** 19.6 cu yd - **Struck:** 14.4 cu yd - **Tailgate Heaped Sae 2:1:** 20.4 cu yd - **Tailgate Struck:** 14.5 cu yd ### Body Hoist - **Lower Time:** 8 s - **Raise Time:** 10 s ### Body Plate - **Body Plate Type:** High Strength Brinell HB450 Wear Resistant Steel ### Dimensions - **Height:** 12.4167 ft (3.78 m) - **Length:** 34.5833 ft (10.54 m) - **Weight:** 51191 lbs (23215.87 kg) - **Width:** 9.6667 ft (2.95 m) ### Dump - **Capacity - Heaped:** 20.4 cu yd - **Capacity - Struck:** 14.4 cu yd - **Dump Angle:** 45 degrees - **Lower Time:** 8 sec - **Raise Time:** 10 sec - **Rated Payload:** 23586.8 lbs (10698.81 kg) - **Rated Payload:** 57320.12 lbs (26000 kg) ### Engine - **Bore:** 4.6 in (11.68 cm) - **Displacement:** 567 cu in (9291.49 cu cm) - **Engine Make:** 2236 - **Engine Model:** Cat C9.3 ACERT - **Engine Model:** C9.3 Acert - **Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv:** Cat C9.3 ACERT - **Gross Power:** 320 hp (238.63 kw) - **Gross Power - Sae J1995:** 320 hp (238.63 kw) - **Max Torque:** 1263 lbs ft (1712.38 nm) - **Net Power:** 314 hp (234.15 kw) - **Net Power - Iso 14396:** 316 hp (235.65 kw) - **Net Power - Sae J1349:** 314 hp (234.15 kw) - **No Engine De-Rating Required Below:** 8400 ft (2560.32 m) - **Peak Engine Torque Gross (Sae J1995):** 1275 lbs ft (1728.65 nm) - **Peak Engine Torque Net (Iso 14396):** 1263 lbs ft (1712.38 nm) - **Peak Engine Torque Speed:** 1200 rpm - **Stroke:** 5.9 in (14.99 cm) - **Torque Measured @:** 1200 rpm ### Operating Weights - **Center Axle - Empty:** 10030 lbs (4549.54 kg) - **Center Axle - Loaded:** 33333 lbs (15119.61 kg) - **Center Axle - Rated Load:** 23303 lbs (10570.08 kg) - **Front Axle - Empty:** 31813 lbs (14430.15 kg) - **Front Axle - Loaded:** 37236 lbs (16889.99 kg) - **Front Axle - Rated Load:** 5423 lbs (2459.83 kg) - **Rear Axle - Empty:** 9348 lbs (4240.19 kg) - **Rear Axle - Loaded:** 32651 lbs (14810.26 kg) - **Rear Axle - Rated Load:** 23303 lbs (10570.08 kg) - **Total - Empty:** 51191 lbs (23219.88 kg) - **Total - Loaded:** 103220 lbs (46819.86 kg) - **Total - Rated Load:** 52029 lbs (23599.99 kg) ### Operational - **Cooling System Fluid Capacity:** 5.8 gal (21.95 l) - **Engine Oil Capacity:** 2.7 gal (10.22 l) - **Fuel Capacity:** 28.6 gal (108.25 l) - **Hydraulic System Fluid Capacity:** 7.7 gal (29.14 l) - **Transmission Fluid Capacity:** 3.3 gal (12.49 l) ### Service Refill Capacities - **Cooling System:** 21.9 gal (82.89 l) - **Def Tank (Iso 2224-1):** 5.3 gal (20.06 l) - **Engine Crankcase:** 10 gal (37.85 l) - **Final Drives/Differential:** 35.7 gal (135.12 l) - **Fuel Tank:** 108.8 gal (411.81 l) - **Hydraulic System:** 29.1 gal (110.14 l) - **Output Transfer Gear Box:** 6.3 gal (23.85 l) - **Transmission:** 12.4 gal (46.93 l) ### Sound Levels - **Interior Cab:** 76 dB(A) ### Standards - **Brakes:** ISO 3450 - 2011 - **Cab - Fops:** ISO 3449 Level II - 2005 - **Cab - Rops:** ISO 3471 - 2008 - **Steering:** ISO 5010 - 2007 ### Steering - **Lock To Lock:** 4.75 seconds @ 60 rpm ### Transmission - **Forward - 1:** 5 mph (8.05 kph) - **Forward - 2:** 9 mph (14.48 kph) - **Forward - 3:** 14 mph (22.53 kph) - **Forward - 4:** 21 mph (33.8 kph) - **Forward - 5:** 30 mph (48.28 kph) - **Forward - 6:** 35 mph (56.33 kph) - **Number Of Forward Gears:** 6 - **Number Of Reverse Gears:** 1 - **Reverse - 1:** 6 mph (9.66 kph) ### Turning Circle - **Note:** Dimensions are for machines equipped with 23.5R25 tires. - **Turning Dimensions - Aisle Width:** 210 in (533.4 cm) - **Turning Dimensions - Clearance Radius:** 318 in (807.72 cm) - **Turning Dimensions - Inside Radius:** 153 in (388.62 cm) - **Turning Dimensions - Sae Turning Radius:** 294 in (746.76 cm) - **Turning Dimensions - Steer Angle - Left/Right:** 45 degrees ### Weights - **Center Axle - Empty:** 10030 % - **Center Axle - Loaded:** 23303 % - **Front Axle - Empty:** 31813 lbs (14430.15 kg) - **Front Axle - Loaded:** 5423 % - **Rear Axle - Empty:** 9348 lbs (4240.19 kg) - **Rear Axle - Loaded:** 23303 lbs (10570.08 kg) - **Total Empty:** 51191 lbs (23219.88 kg) - **Total Loaded:** 103220 lbs (46819.86 kg) ## About this model The Caterpillar 725C is an articulated off-highway truck designed for hauling material in construction, quarry, and earthmoving applications. It is part of Caterpillar's 725 series and is commonly used for site development, road building, and large-scale material transport on rough terrain. The 725C features a rear dump body, articulated steering, and all-wheel drive for improved traction and maneuverability in challenging conditions. It is typically powered by a diesel engine and built for high-capacity hauling with operator comfort and service access in mind. The Caterpillar 725C remains a recognized model in the off-highway truck category. ## Photos ![2014 Caterpillar 725C](https://cdn.filepicker.io/api/file/mQORhMfRXKqt2jrKn0BT) ![2014 Caterpillar 725C photo 2](https://cdn.filepicker.io/api/file/pCDAPtQqJR7WlnPHTQKo) ![2014 Caterpillar 725C photo 3](https://cdn.filepicker.io/api/file/vkfWbAWwRhKagcWGn49A) ![2014 Caterpillar 725C photo 4](https://cdn.filepicker.io/api/file/0V2ODmK5SiSDUXYu8J14) ![2014 Caterpillar 725C photo 5](https://cdn.filepicker.io/api/file/GtRk95EjRHa2TbIx1hn2)