# 2019 Caterpillar 725C2 for Sale in ROUEN / SAINT-JEAN-DU-CARDONNAY , 76 **URL:** ## Listing details - **Price:** $189,000.00 USD - **Listing ID:** 89182403 - **Year:** 2019 - **Manufacturer:** Caterpillar - **Model:** 725C2 - **Category:** Off-Highway Trucks - **Hours:** 2742 - **Serial number:** 2T301038 - **Location:** ROUEN / SAINT-JEAN-DU-CARDONNAY , 76 ## Description Air conditioning - Good - Air conditioning, Body - Good - Heater, Cabin type - Good - Closed;FOPS;ROPS, Fuel supply - Good - Wiggins, Lubrication type - Good - Automatic - Manufacturer : groeneveld, Online Owner's Manual , Seat type - Good - Heated;Pneumatic, Tires - Good - Manufacturer : MICHELIN - Model : 23.5R25 XT, Transport dimension (L x W x H) - 10.59m x 2.95m x 3.51m, Weighing system - Good - Standard - Manufacturer : CATERPILLAR - Model : CPM ## Manufacturer specifications ### Body Capacities - **Heaped (Sae 2:1):** 19.6 cu yd - **Struck:** 14.4 cu yd - **Tailgate Heaped Sae 2:1:** 20.4 cu yd - **Tailgate Struck:** 14.5 cu yd ### Body Hoist - **Lower Time:** 8 s - **Raise Time:** 10 s ### Body Plate - **Body Plate Type:** High strength Brinell HB450 wear resistant steel ### Dimensions - **Height:** 12.4167 ft (3.78 m) - **Length:** 34.5833 ft (10.54 m) - **Weight:** 50795 lbs (23040.25 kg) - **Width:** 9.6667 ft (2.95 m) ### Dump - **Rated Payload:** 57320.12 lbs (26000 kg) ### Engine - **Bore:** 5.1 in (12.95 cm) - **Displacement:** 762.8 cu in (12500.08 cu cm) - **Emissions:** The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. - **Engine Model:** Cat C13 ACERT - **Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv:** Cat C9.3 ACERT - **Gross Power - Sae J1995:** 320 hp (238.63 kw) - **Net Power - Iso 14396:** 316 hp (235.65 kw) - **Net Power - Sae J1349:** 314 hp (234.15 kw) - **No Engine De-Rating Below:** 7500 ft (2286 m) - **No Engine De-Rating Required Below:** 7500 ft (2286 m) - **Note (1):** The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. - **Note (2):** The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. - **Note (3):** Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions. - **Note (4):** DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. - **Peak Engine Torque Gross (Sae J1995):** 1275 lbs ft (1728.65 nm) - **Peak Engine Torque Net (Iso 14396):** 1262 lbs ft (1711.02 nm) - **Peak Engine Torque Net (Sae J1349):** 1262 lbs ft (1711.02 nm) - **Peak Engine Torque Speed:** 1200 rpm - **Stroke:** 6.2 in (15.75 cm) ### General Specifications - **Articulated/Rigid (since 2018):** Articulated - **Bore (since 2017):** 4.53 in (115 mm) - **Clearance Radius (since 2017):** 317.9 in (8075 mm) - **DEF Tank Capacity (since 2017):** 5.3 US gal (20 L) - **Displacement (since 2017):** 567 cu in (9.3 L) - **Distribution Empty - Center (since 2017):** 19 % - **Distribution Empty - Front (since 2017):** 62 % - **Distribution Empty - Rear (since 2017):** 19 % - **Distribution Loaded - Center (since 2017):** 33 % - **Distribution Loaded - Front (since 2017):** 35 % - **Distribution Loaded - Rear (since 2017):** 32 % - **Drive Configuration (since 2018):** 6WD - **Engine Model (since 2017):** C9.3 ACERT - **Engine Type (since 2018):** Cat C9.3 ACERT - **Fuel Tank Refill Capacity (since 2017):** 108.8 US gal (412 L) - **General Dimensions (Empty) - Body Length (since 2017):** 224.3 in (5696 mm) - **General Dimensions (Empty) - Height at Full Dump (since 2017):** 248.3 in (6306 mm) - **General Dimensions (Empty) - Height to Cab Top (since 2017):** 137.1 in (3482 mm) - **General Dimensions (Empty) - Loading Height (Empty) (since 2017):** 107.3 in (2725 mm) - **General Dimensions (Empty) - Overall Length (since 2017):** 415.2 in (10547 mm) - **General Dimensions (Empty) - Width (Operating - Over Mirrors) (since 2017):** 145.8 in (3704 mm) - **Gross Machine Weight (since 2017):** 103121 lbs (46775 kg) - **Gross Power - SAE J1995 (since 2017):** 320 hp (239 kW) - **Heaped (2:1) (SAE) (since 2017):** 19.6 cu yd (15 cu m) - **Long Wheelbase (since 2021):** 215.2 in (546.61 cm) - **Max. Capacity (since 2017):** 26.5 T (24 t) - **Max. Capacity\*\* (since 2018):** 26.5 T (24 t) - **Mfg. Model (since 2018):** 725C2 - **Net Power - ISO 14396 (since 2017):** 316 hp (236 kW) - **Net Power - SAE J1349 (since 2017):** 314 hp (234 kW) - **No. Cylinders (since 2017):** 6 - **Operating Weight (since 2018):** 50,795 lbs (23040.25 kg) - **Operating Weight (Empty) (since 2017):** 50211 lbs (22775 kg) - **Operating Weight (Empty)\* (since 2018):** 50211 lbs (22775 kg) - **Planetary Powershift Transmission (since 2018):** Powershift w/ lockup torque converter - **Rated Payload (since 2018):** 26.5 t (26500 kg) - **Rated Payload (since 2021):** 26 ton - **Standard Wheelbase (since 2021):** 156.7 in (398.02 cm) - **Stroke (since 2017):** 5.87 in (149 mm) - **Struck (SAE) (since 2017):** 14.4 cu yd (11 cu m) - **Tailgate Heaped SAE 2:1 (since 2017):** 20.4 cu yd (15.6 cu m) - **Tailgate Struck (since 2017):** 14.5 cu yd (11.1 cu m) - **Tires (since 2017):** 23.5R25 - **Top Speed (Loaded) (since 2017):** 34 mph (55 km/h) ### Operating Weights - **Center Axle - Empty:** 9755 lbs (4424.8 kg) - **Center Axle - Loaded:** 33455 lbs (15174.95 kg) - **Center Axle - Rated Load:** 23700 lbs (10750.15 kg) - **Front Axle - Empty:** 31835 lbs (14440.13 kg) - **Front Axle - Loaded:** 37374 lbs (16952.58 kg) - **Front Axle - Rated Load:** 5512 lbs (2500.2 kg) - **Rear Axle - Empty:** 9205 lbs (4175.32 kg) - **Rear Axle - Loaded:** 32905 lbs (14925.48 kg) - **Rear Axle - Rated Load:** 23700 lbs (10750.15 kg) - **Total - Empty:** 50795 lbs (23040.25 kg) - **Total - Loaded:** 103707 lbs (47040.76 kg) - **Total - Rated Load:** 52912 lbs (24000.51 kg) ### Service Refill Capacities - **Cooling System:** 21.9 gal (82.89 l) - **Def Tank:** 5.3 gal (20.06 l) - **Def Tank (Iso 2224-1):** 5.2 gal (19.68 l) - **Engine Crankcase:** 10 gal (37.85 l) - **Final Drives/Differential:** 33 gal (124.91 l) - **Fuel Tank:** 108.8 gal (411.81 l) - **Hydraulic System:** 29.1 gal (110.14 l) - **Output Transfer Gear Box:** 6.3 gal (23.85 l) - **Transmission:** 12.4 gal (46.93 l) ### Sound Levels - **Interior Cab:** 76 dB(A) - **Note (1):** The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. - **Note (2):** Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. ### Standards - **Brakes:** ISO 3450 - 2011 - **Cab - Fops:** ISO 3449 Level II - 2005 - **Cab - Rops:** ISO 3471 - 2008 - **Steering:** ISO 5010 - 2007 ### Steering - **Lock To Lock:** 4.75 seconds @ 60 rpm ### Transmission - **Forward - 1:** 5 mph (8.05 kph) - **Forward - 2:** 9 mph (14.48 kph) - **Forward - 3:** 14 mph (22.53 kph) - **Forward - 4:** 21 mph (33.8 kph) - **Forward - 5:** 29 mph (46.67 kph) - **Forward - 6:** 36 mph (57.94 kph) - **Reverse - 1:** 6 mph (9.66 kph) ### Turning Circle - **Note:** Dimensions are for machines equipped with 23.5R25 tires. - **Turning Dimensions - Aisle Width:** 210 in (533.4 cm) - **Turning Dimensions - Clearance Radius:** 318 in (807.72 cm) - **Turning Dimensions - Inside Radius:** 153 in (388.62 cm) - **Turning Dimensions - Sae Turning Radius:** 294 in (746.76 cm) - **Turning Dimensions - Steer Angle - Left/Right:** 45 degrees ### Wheel Base Length - **Long Wheel Base:** 215.2 in (546.61 cm) - **Standard Wheel Base:** 156.7 in (398.02 cm) ## About this model The Caterpillar 725C2 is an articulated off-highway truck designed for hauling material in construction, quarry, and earthmoving applications. It is part of Caterpillar's 725 series and is built for rough terrain operation, with a chassis and drivetrain suited to off-road transport. The 725C2 is commonly used for site development, road building, and large-scale material handling where traction and payload capacity are required. As an off-highway truck, it is engineered for durability, stability, and efficient load movement in demanding jobsite conditions. The model is identified as the Caterpillar 725C2, a machine in the off-highway truck category. ## Photos ![2019 Caterpillar 725C2](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1iYjNiN2I1YjFkM2VlMWUyYTNiOTcyMDE1MGU1OGIxOCYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjM4Mjkz) ![2019 Caterpillar 725C2 photo 2](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04NDVjMjM1MTg0MmIyYWU2ODQ5OWU1ODI3YjljZTNiNSYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjYzNjA4) ![2019 Caterpillar 725C2 photo 3](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1lMDkzNmRkZjBiYjE1OTVlYjY3YWMwMzI1OTE5NGE3ZSYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjU5ODg=) ![2019 Caterpillar 725C2 photo 4](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04OTM2MDY5MTgzYmM3ODAyYjkyNWU1MDJhNjI1ODcxYiYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjMzMjE4) ![2019 Caterpillar 725C2 photo 5](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1iZjJmZWY1ZDBkNDNiYjA0ZDJjNWExZjdjMGViMTJiZCYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjIxNzk4) ![2019 Caterpillar 725C2 photo 6](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04YjFhZWVlMmExNmMwMmE1OGE3YjAyNmM4MzY5NjkzOSYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjg2ODM=) ![2019 Caterpillar 725C2 photo 7](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1hN2ZlZTE0ZjY5OTM3NDc2YTRiOTFiYTcxYjZlNmU5NCYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjU4MDY0) ![2019 Caterpillar 725C2 photo 8](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz05MjU5Nzg0ODBiYzk2YWZkYmZlNGQ5NGFmN2IxZDk1NCYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjQzNTI3) ![2019 Caterpillar 725C2 photo 9](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04ODhmODI0OGIyMDk5Nzg3OWIxZjRjMzk5NmZhYjgyZCYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjY5MzQ=) ![2019 Caterpillar 725C2 photo 10](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz05MTliOTBmNWRmNmEyOTM0ZGVkYTRmMGY0YjlhM2YxZCYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjU2MzYx) ![2019 Caterpillar 725C2 photo 11](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1kMGEzYjYzYWE4NjMzMWFmZjQxNmRlYzIxZjUyOTY3ZCYkdHh0PUJFUkdFUkFUJTIwTU9OTk9ZRVVSJTIwUy5BLlMuJjI2NDY1)