# 2018 Caterpillar 730C2 for Sale in ?? **URL:** ## Listing details - **Price:** $210,000.00 USD - **Listing ID:** 87736805 - **Year:** 2018 - **Manufacturer:** Caterpillar - **Model:** 730C2 - **Category:** Off-Highway Trucks - **Hours:** 10008 - **Serial number:** 2T401048 - **Location:** ?? ## Description Online Owner's Manual ## Manufacturer specifications ### Body Capacities - **Heaped (Sae 2:1):** 23 cu yd - **Struck:** 17.4 cu yd - **Tailgate Heaped Sae 2:1:** 24.6 cu yd - **Tailgate Struck:** 18.2 cu yd ### Body Hoist - **Lower Time:** 8 s - **Raise Time:** 12 s ### Body Plate - **Body Plate Type:** High strength Brinell HB450 wear resistant steel ### Body Plate Thickness - **Base:** 0.6 in (1.52 cm) - **Chute:** 0.6 in (1.52 cm) - **Front:** 0.3 in (0.76 cm) - **Side:** 0.5 in (1.27 cm) ### Dimensions - **Height:** 11.4167 ft (3.48 m) - **Length:** 34.6667 ft (10.57 m) - **Weight:** 52305 lbs (23725.18 kg) - **Width:** 9.6667 ft (2.95 m) ### Dump - **Rated Payload:** 68343.22 lbs (31000 kg) ### Engine - **Bore:** 5.1 in (12.95 cm) - **Displacement:** 762.8 cu in (12500.08 cu cm) - **Emissions:** The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. - **Engine Model:** Cat C13 ACERT - **Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv:** Cat C13 ACERT - **Gross Power - Sae J1995:** 375 hp (279.64 kw) - **Net Power - Iso 14396:** 370 hp (275.91 kw) - **Net Power - Sae J1349:** 367 hp (273.68 kw) - **No Engine De-Rating Below:** 12500 ft (3810 m) - **No Engine De-Rating Required Below:** 12500 ft (3810 m) - **Note (1):** The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. - **Note (2):** The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. - **Note (3):** Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. - **Note (4):** DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. - **Peak Engine Torque Gross (Sae J1995):** 1579 lbs ft (2140.81 nm) - **Peak Engine Torque Net (Iso 14396):** 1564 lbs ft (2120.47 nm) - **Peak Engine Torque Net (Sae J1349):** 1564 lbs ft (2120.47 nm) - **Peak Engine Torque Speed:** 1200 rpm - **Stroke:** 6.2 in (15.75 cm) ### General Specifications - **Bore (since 2017):** 5.12 in (130 mm) - **Clearance Radius (since 2017):** 317.9 in (8075 mm) - **DEF Tank Capacity (since 2017):** 5.3 US gal (20 L) - **Displacement (since 2017):** 763 cu in (12.5 L) - **Distribution Empty - Center (since 2017):** 19 % - **Distribution Empty - Front (since 2017):** 62 % - **Distribution Empty - Rear (since 2017):** 19 % - **Distribution Loaded - Center (since 2017):** 33 % - **Distribution Loaded - Front (since 2017):** 34 % - **Distribution Loaded - Rear (since 2017):** 33 % - **Engine Model (since 2017):** C13 ACERT - **Fuel Tank Refill Capacity (since 2017):** 108.8 US gal (412 L) - **General Dimensions (Empty) - Body Length (since 2017):** 227.7 in (5783 mm) - **General Dimensions (Empty) - Height at Full Dump (since 2017):** 254.5 in (6464 mm) - **General Dimensions (Empty) - Height to Cab Top (since 2017):** 137.1 in (3482 mm) - **General Dimensions (Empty) - Loading Height (Empty) (since 2017):** 114.6 in (2911 mm) - **General Dimensions (Empty) - Overall Length (since 2017):** 415.6 in (10555 mm) - **General Dimensions (Empty) - Width (Operating - Over Mirrors) (since 2017):** 145.8 in (3704 mm) - **Gross Machine Weight (since 2017):** 113107 lbs (51305 kg) - **Gross Power - SAE J1995 (since 2017):** 375 hp (280 kW) - **Heaped (2:1) (SAE) (since 2017):** 23 cu yd (17.5 cu m) - **Long Wheelbase (since 2021):** 215.2 in (546.61 cm) - **Max. Capacity (since 2017):** 31 T (28 t) - **Max. Capacity\*\* (since 2018):** 31 T (28 t) - **Net Power - ISO 14396 (since 2017):** 370 hp (276 kW) - **Net Power - SAE J1349 (since 2017):** 367 hp (274 kW) - **No. Cylinders (since 2017):** 6 - **Operating Weight (Empty) (since 2017):** 51378 lbs (23305 kg) - **Operating Weight (Empty)\* (since 2018):** 51378 lbs (23305 kg) - **Rated Payload (since 2021):** 31 ton - **Standard Wheelbase (since 2021):** 156.7 in (398.02 cm) - **Stroke (since 2017):** 6.18 in (157 mm) - **Struck (SAE) (since 2017):** 17.4 cu yd (13.3 cu m) - **Tailgate Heaped SAE 2:1 (since 2017):** 24.6 cu yd (18.8 cu m) - **Tailgate Struck (since 2017):** 18.2 cu yd (13.9 cu m) - **Tires (since 2017):** 23.5R25 - **Top Speed (Loaded) (since 2017):** 34 mph (55 km/h) ### Operating Weights - **Center Axle - Empty:** 9987 lbs (4530.03 kg) - **Center Axle - Loaded:** 37236 lbs (16889.99 kg) - **Center Axle - Rated Load:** 27249 lbs (12359.95 kg) - **Front Axle - Empty:** 32882 lbs (14915.04 kg) - **Front Axle - Loaded:** 40113 lbs (18194.97 kg) - **Front Axle - Rated Load:** 7231 lbs (3279.93 kg) - **Rear Axle - Empty:** 9436 lbs (4280.1 kg) - **Rear Axle - Loaded:** 36685 lbs (16640.06 kg) - **Rear Axle - Rated Load:** 27249 lbs (12359.95 kg) - **Total - Empty:** 52305 lbs (23725.18 kg) - **Total - Loaded:** 114034 lbs (51725.02 kg) - **Total - Rated Load:** 61729 lbs (27999.84 kg) ### Service Refill Capacities - **Cooling System:** 21.9 gal (82.89 l) - **Def Tank:** 5.2 gal (19.68 l) - **Def Tank (Iso 2224-1):** 5.3 gal (20.06 l) - **Engine Crankcase:** 10 gal (37.85 l) - **Final Drives/Differential:** 33 gal (124.91 l) - **Fuel Tank:** 108.8 gal (411.81 l) - **Hydraulic System:** 29.1 gal (110.14 l) - **Output Transfer Gear Box:** 6.3 gal (23.85 l) - **Transmission:** 12.4 gal (46.93 l) ### Sound Levels - **Interior Cab:** 76 dB(A) - **Note (1):** The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. - **Note (2):** Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. ### Standards - **Brakes:** ISO 3450 2011 - **Cab - Fops:** ISO 3449 Level II 2005 - **Cab - Rops:** ISO 3471 2008 - **Steering:** ISO 5010 2007 ### Steering - **Lock To Lock:** 4.75 seconds @ 60 rpm ### Transmission - **Forward - 1:** 5 mph (8.05 kph) - **Forward - 2:** 9 mph (14.48 kph) - **Forward - 3:** 14 mph (22.53 kph) - **Forward - 4:** 21 mph (33.8 kph) - **Forward - 5:** 29 mph (46.67 kph) - **Forward - 6:** 34 mph (54.72 kph) - **Reverse - 1:** 6 mph (9.66 kph) ### Turning Circle - **Note:** Dimensions are for machines equipped with 23.5R25 tires. - **Turning Dimensions - Aisle Width:** 210 in (533.4 cm) - **Turning Dimensions - Clearance Radius:** 318 in (807.72 cm) - **Turning Dimensions - Inside Radius:** 153 in (388.62 cm) - **Turning Dimensions - Sae Turning Radius:** 294 in (746.76 cm) - **Turning Dimensions - Steer Angle - Left/Right:** 45 degrees ### Wheel Base Length - **Long Wheel Base:** 215.2 in (546.61 cm) - **Standard Wheel Base:** 156.7 in (398.02 cm) ## About this model The Caterpillar 730C2 is a rigid-frame off-highway truck used in mining, quarry, and large earthmoving applications. It is designed for hauling material over rough terrain and is commonly paired with excavators, wheel loaders, and dozers in production fleets. The 730C2 features a 6x6 drivetrain, articulated steering, and a rear dump body for efficient load transport and discharge. Caterpillar equipped the model with operator controls, service access, and durability features suited to demanding jobsite conditions. The 730C2 is part of Caterpillar's off-highway truck lineup and is used for material handling in construction and aggregate operations. ## Photos ![2018 Caterpillar 730C2](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz05ZWYwMjU1YmZmNDA5OGY3ZTEzYWRhNTYxNWViZDg1ZSYkdHh0PUNHVCUyMC0lMjBDT01QQUdOSUElMjBHRU5FUkFMRSUyMFRSQVRUT1JJJjQxMjIz) ![2018 Caterpillar 730C2 photo 2](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1lODkxMmRmYjkxMmYzM2VkYTEwMDQ0M2U1NTlhNGJmYyYkdHh0PUNHVCUyMC0lMjBDT01QQUdOSUElMjBHRU5FUkFMRSUyMFRSQVRUT1JJJjE2Njg1) ![2018 Caterpillar 730C2 photo 3](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1lNDk0OGZmMGQ0ZWI4NmUzYTNjOTNlZTEzOWYxMjY3MCYkdHh0PUNHVCUyMC0lMjBDT01QQUdOSUElMjBHRU5FUkFMRSUyMFRSQVRUT1JJJjQzMjgz) ![2018 Caterpillar 730C2 photo 4](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz05YTZlZjNlZWQ0OTQ5ZjAzYWEzNDUxMjBhMDVhOWRmYiYkdHh0PUNHVCUyMC0lMjBDT01QQUdOSUElMjBHRU5FUkFMRSUyMFRSQVRUT1JJJjEwNzYy) ![2018 Caterpillar 730C2 photo 5](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04ODQ4NTE1YWViMGViOWFkZDU1MmQxNzlhZDc3NjZjYyYkdHh0PUNHVCUyMC0lMjBDT01QQUdOSUElMjBHRU5FUkFMRSUyMFRSQVRUT1JJJjU0NzYy) ![2018 Caterpillar 730C2 photo 6](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1iNjg3OWYzMDY4ZWY3YmE3YWIwOTgyMjAxYjMyYTU1ZCYkdHh0PUNHVCUyMC0lMjBDT01QQUdOSUElMjBHRU5FUkFMRSUyMFRSQVRUT1JJJjIwOTI4)