2011 Caterpillar 773F For Sale in St Augustine, FL



For Sale: $350,000.00 USD


Ring Power Corp

https://www.ringpower.com


Contact: Frank Streva

Click for Phone Number

Machine Info:

Hours:15231
Serial Number:EED01220
Stock Number:EED01220
Machine Location:ST AUGUSTINE, FL 32092

Description:

CAB, A/C, RETARDER, LINER, HEATED BOX, EMERG STEER, FAST FUEL,


Specs from the manufacturer:

Approximate Weights - Dual Slope
Body28,574 lbs (12,961 kg)
Gross Weight - Empty134,000 lbs (60,782 kg)
Approximate Weights - Flat Floor
Body28,451 lbs (12,905 kg)
Chassis35 lbs (16 kg)
Articulating/Rigid
Articulating/Rigid Rigid
Body Hoists
Body Lower Time - Float13 sec
Body Power Down - High Idle31 °
Body Raise Time - High Idle10 sec
Pump Flow - High Idle148 gal/min (560 l/min)
Relief Valve Setting - Lower35 psi
Relief Valve Setting - Raise2,500 psi
Brakes
Brake Standards15
Brake Surface - Front216 cu in (0 m)
Brake Surface - Rear9,497 cu in (0 m)
Standards3.64:1
Capacity - Dual Slope - 100% Fill Factor
Heaped 2:1 (SAE)34 cu yds (26 m)
Struck35 cu yds (27 m)
Capacity - Flat Floor - 100% Fill Factor
Heaped 2:1 (SAE)SAE J1040 MAY94, ISO 3471:1994 ROPS and ISO 3449:1992 Level II FOPS cu yds (0 m)
Struck46 cu yds (35 m)
Dimensions
Centerline Front Tire Width11 ft (3 m)
Centerline of Rear Dual Tire Width30 ft (9 m)
Dump Clearance2 ft (1 m)
Dump Ground Clearance2 ft (1 m)
Dump Height31 ft (9 m)
Engine Guard Clearance2 ft (1 m)
Front Canopy Height15 ft (4 m)
Ground Clearance3 ft (1 m)
Height - Top of ROPS/FOPS14 ft (4 m)
Inside Body Depth - Maximum6 ft (2 m)
Inside Body Length21 ft (6 m)
Inside Body Width2 ft (1 m)
Loading Height - Empty13 ft (4 m)
Operating Width18 ft (5 m)
Outside Body Width222,001 ft (67,667 m)
Overall Body Length14 ft (4 m)
Overall Canopy Width500 ft (152 m)
Overall Height15 ft (4 m)
Overall Height - Body Raised31 ft (9 m)
Overall Length34 ft (10 m)
Overall Tire Width15 ft (4 m)
Overall Width18 ft (5 m)
Rear Axle - Clearance10 ft (3 m)
Rear Axle - Tail2 ft (1 m)
Wheel Base14 ft (4 m)
Wheelbase14 ft (4 m)
DRIVE SYSTEM
Drive Config 4x2
Dump
Dump Angle1,800
Load Capacity - heaped46 cu yds (35 m)
Load Capacity - Struck34 cu yds (26 m)
Lower Time13 sec
Raise Time10 sec
Rated Payload120,000 lbs (54,432 kg)
Engine
AspirationTurbocharged
Bore5 in (14 cm)
Displacement1,649 cu in (0 m)
Engine ModelCat C27 ACERT
Flywheel Power703 hp (524 kw)
Gross Power740 hp (552 kw)
Gross Power - SAE J1995740 hp (552 kw)
MakeCat
Max Torque2,507 lbs/ft
ModelC27 ACERT
Net Power703 hp (524 kw)
Net Power - 80/1269/EEC703 hp (524 kw)
Net Power - Cat703 hp (524 kw)
Net Power - ISO 9249703 hp (524 kw)
Net Power - SAE J1349703 hp (524 kw)
Number of Cylinders12
Peak Torque2,507 lbs/ft
Power Measured @1,800 rpm
Rated Engine Speed1,800 rpm
Stroke6 in (15 cm)
Torque Measured @Turbocharged rpm
Final Drives
Differential Ratio17.49:1
Planetary Ratio4.80:1
Total Reduction Ratio17.49:1
Operating Specifications
Alternator Supplied AmperageGear
Body Capacity - SAE 2:146 cu yds (35 m)
Brake/Hoist System Fluid Capacity81 gal (307 l)
Cooling System Fluid Capacity46 gal (174 l)
Diff and Final Drive Fluid Capacity41 gal (155 l)
Engine Oil Capacity19 gal (72 l)
Fuel Capacity185 gal (700 l)
Hydraulic System Fluid Capacity19 gal (72 l)
Lower Time13 sec
Maximum Capacity107,080 lbs (48,571 kg)
Maximum Working Payload (110%)134,000 lbs (60,782 kg)
Nominal Payload Capacity41 lbs (19 kg)
Nominal Payload Class (100%)122,000 lbs (55,339 kg)
Not to Exceed Payload (120%)*146,000 lbs (66,225 kg)
Raise Time10 sec
Steer Angle77 °
Steering System Fluid Capacity16 gal (61 l)
Tire Size24.00R35(E4)
Top Speed - Loaded42 mph (67 kph)
ROPS
ROPS Standards.ANSI/SAE J1166 MAY90
ROPS/FOPS StandardsSAE J1040 MAY94, ISO 3471:1994 ROPS and ISO 3449:1992 Level II FOPS
Service Refill Capacities
Brake / Hoist / Fan Hydraulic Tank35 gal (132 l)
Brake Hoist System - Includes Tank81 gal (307 l)
Brake/Hoist Hydraulic Tank120,000 gal (454,200 l)
Cooling System46 gal (174 l)
Crankcase25 gal (95 l)
Differential - Final Drives25 gal (95 l)
Fuel Tank185 gal (700 l)
Steering System - Including Tank16 gal (61 l)
Steering Tank9 gal (34 l)
Torque Converter - Transmission System - Including Sump19 gal (72 l)
Sound
Sound StandardsANSI/SAE J1166 MAY90
Steering System
Steer Angle31 °
Steering StandardsSAE J1511 FEB94 ISO 5010:1992
Turning Circle - Clearance Diameter86 ft (26 m)
Suspension
Effective Cylinder Stroke - Front6 in (15 cm)
Effective Cylinder Stroke - Rear6 in (15 cm)
Rear axle - Oscillation9 °
Tires
Standard Tire24.00R35 (E4)
Standard Tires216
Transmission
Forward - 17 mph (11 kph)
Forward - 29 mph (15 kph)
Forward - 313 mph (20 kph)
Forward - 417 mph (27 kph)
Forward - 523 mph (37 kph)
Forward - 631 mph (50 kph)
Forward - 742 mph (67 kph)
Max Speed42 mph (67 kph)
Number of Gears - Forward7
Number of Gears - Reverse1
Reverse9 mph (14 kph)
Transmission Type13
Weights
Empty Weight98,312 lbs (44,594 kg)
Front Axle - Empty51%
Front Axle - Loaded35%
Loaded Weight222,000 lbs (100,699 kg)
Operating Weight 222,000 lbs (100,699 kg)
Operating Weight - LoadedSAE J1511 FEB94 ISO 5010:1992 lbs (0 kg)
Rear Axle - Empty49%
Rear Axle - Loaded65%
Target Gross Machine Operating Weight222,001 lbs (100,699 kg)
Weight Distribution Front - empty51%
Weight Distribution Front - loaded35%
Weight Distribution Rear - empty49%
Weight Distribution Rear - loaded65%

Dealer Contact Info:

Ring Power Corp

Fax: 904-281-0221



Contact: Frank Streva

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo