List Your Equipment  /  Dealer Login
This machine has been sold or is not currently for sale.

1997 Caterpillar 777D



MACHINE SOLD



Machine Info:

Stock Number:CT97001X
Machine Location:ARLINGTON, TX

Description:

A/C & Heat - Automatic Power Shift rebuilt about 6000 hours ago -Cat 3508 Rebuilt about 6000 hours ago - Video Available. Call for additional information.


From the manufacturer:

Supplied by HeavyEquipmentData.com →

Approximate Weights - Dual Slope
Body34,785.0 lbs  ( 15,778 kg )
Chassis106,964.0 lbs  ( 48,519 kg )
Approximate Weights - Flat Floor
Body1,300.0 lbs  ( 590 kg )
Body Hoists
Body Lower Time - Float13.0 seconds
Body Raise Time - High Idle15.0 seconds
Pump Flow - High Idle119.0 gpm  ( 450 lpm )
Relief Valve Setting - Raise2,750.0 psi
Brakes
Brake Surface - Rear15,828.0 cu in  ( 0 cu m )
Standards2.74:1
Capacity - Dual Slope - 100% Fill Factor
Heaped 2:1 (SAE)78.6 cu yd  ( 60 cu m )
Capacity - Flat Floor - 100% Fill Factor
Heaped 2:1 (SAE)SAE J1040 MAY94, ISO 3471:1997 cu yd
Dimensions
Centerline Front Tire Width13.7 ft  ( 4 m )
Dump Ground Clearance2.9 ft  ( 1 m )
Dump Height32.8 ft  ( 10 m )
Front Canopy Height16.6 ft  ( 5 m )
Ground Clearance2.5 ft  ( 1 m )
Inside Body Length23.8 ft  ( 7 m )
Loading Height - Empty14.4 ft  ( 4 m )
Operating Width20.1 ft  ( 6 m )
Overall Height16.5 ft  ( 5 m )
Overall Height - Body Raised33.0 ft  ( 10 m )
Overall Length32.1 ft  ( 10 m )
Overall Width20.1 ft  ( 6 m )
Wheel Base15.0 ft  ( 5 m )
Wheelbase15.0 ft  ( 5 m )
Dump
Dump Angle1,750.0
Load Capacity - heaped79.2 cu yd  ( 61 cu m )
Load Capacity - Struck55.0 cu yd  ( 42 cu m )
Raise Time15.0 seconds
Rated Payload200,000.0 lbs  ( 90,719 kg )
Engine
Bore6.7 in  ( 17 cm )
Displacement2,105.0 cu in  ( 0 cu m )
Engine ModelCat 3508B EUI
Flywheel Power938.0 hp  ( 699 kw )
Gross Power1,000.0 hp  ( 746 kw )
Gross Power - SAE J19951,000.0 hp  ( 746 kw )
Max Torque3,476.2 lbs ft
Net Power938.0 hp  ( 699 kw )
Net Power - 80/1269/EEC938.0 hp  ( 699 kw )
Net Power - Cat938.0 hp  ( 699 kw )
Net Power - ISO 9249938.0 hp  ( 699 kw )
Net Power - SAE J1349938.0 hp  ( 699 kw )
Number of Cylinders8.0
Stroke7.5 in  ( 19 cm )
Torque Measured @1,300.0 rpm
Final Drives
Planetary Ratio7.00:1
Total Reduction Ratio19.16:1
Operating Specifications
Alternator Supplied Amperageautomatic power shift
Body Capacity - SAE 2:178.6 cu yd  ( 60 cu m )
Body Capacity - Struck55.1 cu yd  ( 42 cu m )
Brake/Hoist System Fluid Capacity109.7 gal  ( 415 l )
Circle Clearance Diameter85.5 ft  ( 26 m )
Cooling System Fluid Capacity85.9 gal  ( 325 l )
Diff and Final Drive Fluid Capacity87.0 gal  ( 329 l )
Engine Oil Capacity32.8 gal  ( 124 l )
Fuel Capacity300.4 gal  ( 1,137 l )
Lower Time14.0 seconds
Maximum Capacity178,920.0 lbs  ( 81,158 kg )
Nominal Payload Capacity87.0 lbs  ( 39 kg )
Nominal Payload Class (100%)178,920.0 lbs  ( 81,158 kg )
Raise Time15.0 seconds
Steer Angle31.8 deg
Steering System Fluid Capacity22.2 gal  ( 84 l )
Top Speed - Loaded39.9 mph  ( 64 kph )
ROPS
ROPS StandardsANSI/SAE J1166 MAY90, SAE J88 JUN96
Service Refill Capacities
Brake Hoist System - Includes Tank109.7 gal  ( 415 l )
Brake/Hoist Hydraulic Tank200,000.0 gal  ( 757,000 l )
Cooling System86.0 gal  ( 326 l )
Differential - Final Drives87.0 gal  ( 329 l )
Fuel Tank300.0 gal  ( 1,136 l )
Steering System - Including Tank22.0 gal  ( 83 l )
Steering Tank15.0 gal  ( 57 l )
Torque Converter - Brake - Hoist Hydraulic Tank66.0 gal  ( 250 l )
Torque Converter - Transmission Sump107,100.0 gal  ( 405,374 l )
Torque Converter - Transmission System - Including Sump36.5 gal  ( 138 l )
Sound
Sound StandardsANSI/SAE J1166 MAY90, SAE J88 JUN96
Steering System
Steer Angle31.8 deg
Steering StandardsSAE J1511 OCT90, ISO 5010:1992 (E)
Turning Circle - Clearance DiameterISO 3450: 1996; SAE J1473 OCT90 ft
Tires
Standard Tire27.00-R49 (E4)
Standard Tires432.0
Transmission
Forward - 16.5 mph  ( 10 kph )
Forward - 28.9 mph  ( 14 kph )
Forward - 312.0 mph  ( 19 kph )
Forward - 416.2 mph  ( 26 kph )
Forward - 521.9 mph  ( 35 kph )
Forward - 629.4 mph  ( 47 kph )
Forward - 739.9 mph  ( 64 kph )
Max Speed37.6 mph  ( 61 kph )
Number of Gears - Forward7.0
Number of Gears - Reverse1.0
Reverse7.4 mph  ( 12 kph )
Weights
Chassis Weight107,100.0 lbs  ( 48,580 kg )
Empty Weight155,000.0 lbs  ( 70,308 kg )
Front Axle - Empty47%
Front Axle - Loaded33%
Loaded Weight355,010.5 lbs  ( 161,032 kg )
Rear Axle - Empty53%
Rear Axle - Loaded67%
Weight Distribution Front - empty45.4%
Weight Distribution Front - loaded33.3%
Weight Distribution Rear - empty54.6%
Weight Distribution Rear - loaded66.7%

Dealer Contact Info:

Kirby-Smith Machinery, Inc.




Contact: Sales Team

Click for Phone Number


veritread button




aggregateequipmentguide-logo agriculturalequipmentguide-logo craneequipmentguide-logo forestryequipmentguide-logo truckandtrailerguide-logo
39.96250 \\ -83.00610 \\ Columbus \\ PA