| Bowl |
| Heaped Capacity | 26.2 cu yd ( 20 cu m ) |
| Struck Capacity | 18.4 cu yd ( 14 cu m ) |
| Width of Cut | 10.0 ft ( 3 m ) |
| Dimensions |
| Axle to Vertical Hitch Pin | 17.0 in ( 43 cm ) |
| Bail Length - Maximum (Push-Pull) | 60.0 in ( 152 cm ) |
| Extended Push Block (Push-Pull) | 110.0 in ( 279 cm ) |
| Front of Tractor to Front Axle | 10.5 in ( 27 cm ) |
| Ground Clearance - Tractor | 1.9 in ( 5 cm ) |
| Height - Overall Shipping | 146.0 in ( 371 cm ) |
| Height - Scraper Blade Maximum | 21.0 in ( 53 cm ) |
| Height - Top of Cab | 11.1 ft ( 3 m ) |
| Length - Overall Machine | 507.0 in ( 1,288 cm ) |
| Overall Height | 12.2 ft ( 4 m ) |
| Overall Length | 42.3 ft ( 13 m ) |
| Overall Width | 11.4 ft ( 3 m ) |
| Rear Axle - Rear of Machine | 85.0 in ( 216 cm ) |
| Wheel Base | 25.4 ft ( 8 m ) |
| Width - Inside of Bowl | 116.0 in ( 295 cm ) |
| Width - Outside Rear Tires | 120.0 in ( 305 cm ) |
| Width - Overall Machine | 136.0 in ( 345 cm ) |
| Width - Rear Tire Center Lines | 87.0 in ( 221 cm ) |
| Width - Tractor | 117.0 in ( 297 cm ) |
| Engine |
| Scraper Engine | 3,306.0 |
| Tractor Engine | 3306 / 3406C |
| Hydraulic System |
| Apron Cylinder Bore | 7.3 in ( 19 cm ) |
| Apron Cylinder Stroke | 24.0 in ( 61 cm ) |
| Bowl Cylinder Bore | 6.0 in ( 15 cm ) |
| Bowl Cylinder Stroke | 32.0 in ( 81 cm ) |
| Cushion Hitch Circuit | 9.2 gpm ( 35 lpm ) |
| Ejector Cylinder Bore | 6.5 in ( 17 cm ) |
| Ejector Cylinder Stroke | 61.0 in ( 155 cm ) |
| Relief Valve - Implement Circuit | 2,150.0 psi |
| Relief Valve - Steering Circuit | 2,250.0 psi |
| Scraper Circuit | 65.5 gpm ( 248 lpm ) |
| Secondary Steering Circuit | 37.0 gpm ( 140 lpm ) |
| Steering Circuit | 52.0 gpm ( 197 lpm ) |
| Operating Specifications |
| Fuel Capacity | 262.0 gal ( 992 l ) |
| Hydraulic System Fluid Capacity | 37.0 gal ( 140 l ) |
| Tire Size | 33.25-R29 MX XRB 2 |
| Scraper Bowl |
| Apron Closure Force | 24,075.0 lbs ( 10,920 kg ) |
| Apron Opening | 70.0 in ( 178 cm ) |
| Capacity - Struck | 14.0 cu yd ( 11 cu m ) |
| Cutting Edge Thickness | 1.2 in ( 3 cm ) |
| Depth of Cut - Maximum | 13.1 in ( 33 cm ) |
| Depth of Spread - Maximum | 20.6 in ( 52 cm ) |
| Ground Clearance - Maximum | 20.6 in ( 52 cm ) |
| Hyd. Penetration Force - 621G | 48,375.0 lbs ( 21,943 kg ) |
| Rated Load | 48,000.0 lbs ( 21,773 kg ) |
| Scraper Capacity - Heaped | 20.0 cu yd ( 15 cu m ) |
| Width - Cut - To Router Bits | 119.0 in ( 302 cm ) |
| Scraper Engine |
| Bore | 4.8 in ( 12 cm ) |
| Displacement | 638.0 cu in ( 0 cu m ) |
| Gross Power | 246.0 hp ( 183 kw ) |
| Gross Power - Gear 1 | 246.0 hp ( 183 kw ) |
| Make | Caterpillar |
| Model | 3,306.0 |
| Net Power - Gear 1 | 225.0 hp ( 168 kw ) |
| Power Measured @ | 2,200.0 rpm |
| Stroke | 6.0 in ( 15 cm ) |
| Service Refill Capacities - Tractor |
| Cooling System | 22.0 gal ( 83 l ) |
| Crankcase | 9.5 gal ( 36 l ) |
| Differential | 43.0 gal ( 163 l ) |
| Final Drive - Each | 5.0 gal ( 19 l ) |
| Hydraulic Reservoir | 37.0 gal ( 140 l ) |
| Transmission | 19.0 gal ( 72 l ) |
| Wheel Coolant - Each | 12.0 gal ( 45 l ) |
| Steering System |
| Steering Angle - Left | 85 deg |
| Steering Angle - Right | 90 deg |
| Width - 180 degrees Turn | 35.8 ft ( 11 m ) |
| Tractor Engine |
| Bore | 5.4 in ( 14 cm ) |
| Caterpillar Net Power | 330.0 hp ( 246 kw ) |
| Displacement | 893.0 cu in ( 0 cu m ) |
| EEC 80/1269 | 330.0 hp ( 246 kw ) |
| Gross Power | 347.0 hp ( 259 kw ) |
| ISO 9249 | 330.0 hp ( 246 kw ) |
| Net Power | 327.0 hp ( 244 kw ) |
| Net Power - Gears 1-2 | 330.0 hp ( 246 kw ) |
| SAE J1349 | 327.0 hp ( 244 kw ) |
| Stroke | 6.5 in ( 17 cm ) |
| Transmission |
| 1 Forward | 3.1 mph ( 5 kph ) |
| 2 Forward | 5.6 mph ( 9 kph ) |
| 3 Forward | 7.1 mph ( 11 kph ) |
| 4 Forward | 9.6 mph ( 15 kph ) |
| 5 Forward | 12.9 mph ( 21 kph ) |
| 6 Forward | 17.5 mph ( 28 kph ) |
| 7 Forward | 23.6 mph ( 38 kph ) |
| 8 Forward | 31.9 mph ( 51 kph ) |
| Number of Forward Gears | 8.0 |
| Number of Reverse Gears | 1.0 |
| Reverse | 5.7 mph ( 9 kph ) |
| Weights |
| Operating Weight | 84,050.0 lbs ( 38,125 kg ) |
| Total Operating - Loaded | 80,599.0 lbs ( 36,559 kg ) |
| Weights - Standard, Tandem |
| Front Axle | 49,590.0 lbs ( 22,494 kg ) |
| Front Axle Weight - Loaded | 64,708.0 lbs ( 29,351 kg ) |
| Rear Axle | 34,460.0 lbs ( 15,631 kg ) |
| Rear Axle - Weight - Loaded | 67,350.0 lbs ( 30,550 kg ) |
| Scraper Shipping | 32,669.0 lbs ( 14,819 kg ) |
| Total Operating - Empty | 84,050.0 lbs ( 38,125 kg ) |
| Total Operating - Loaded | 132,057.0 lbs ( 59,901 kg ) |
| Total Shipping | 83,768.0 lbs ( 37,997 kg ) |
| Tractor Shipping | 51,098.0 lbs ( 23,178 kg ) |
