# 2016 Caterpillar 236D **URL:** > This machine has been sold or is not currently for sale. ## Listing details - **Price:** Sold - **Listing ID:** 89538077 - **Year:** 2016 - **Manufacturer:** Caterpillar - **Model:** 236D - **Category:** Skid Steer Loaders - **Hours:** 2088 - **Serial number:** CAT0236DEBGZ03033 - **Location:** Chehalis, Wa - **Auction starts:** 2026-10-29 ## Description Located in Lane 8 Spot 18, Open Operator Station, Joystick Steering, Tier 4, 2016 US EPA Label, Manual Quick Coupler, 67 in Bucket, Counterweight Kit Closing Time: 2026-10-29 09:18:30 AM ## Manufacturer specifications ### Air Conditioning System - **Air Conditioning:** The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. ### Cab - **Fops:** ISO 3449:2005 Level I - **Fops Level Ii:** ISO 3449:2005 Level II - **Rops:** ISO 3471:2008 ### Dimensions - **Bucket Pin Height - Carry Position:** 7.5 in (19.05 cm) - **Bucket Pin Height - Maximum Lift:** 10.25 ft (3.12 m) - **Bumper Overhang - Behind Rear Axle:** 40.21 in (102.13 cm) - **Clearance At Max Lift And Dump:** 7.75 ft (2.36 m) - **Clearance At Maximum Lift And Dump:** 92.9 in (235.97 cm) - **Departure Angle:** 26 degrees - **Ground Clearance:** 7.7 in (19.56 cm) - **Height:** 6.8333 ft (2.08 m) - **Height - Top Of Cab:** 6.84 ft (2.08 m) - **Height To Top Of Cab:** 6.83 ft (2.08 m) - **Length:** 11.3333 ft (3.45 m) - **Length - With Bucket On Ground:** 137.31 in (348.77 cm) - **Length - Without Bucket:** 108.9 in (276.61 cm) - **Length W/O Bucket:** 9.08 ft (2.77 m) - **Length With Bucket:** 11.45 ft (3.49 m) - **Maximum Dump Angle:** 48 degrees - **Maximum Overall Height:** 156.6 in (397.76 cm) - **Maximum Reach - With Arms Parallel To Ground:** 53.3 in (135.38 cm) - **Note:** Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). - **Rack Back Angle - Maximum Height:** 91 degrees - **Reach - Maximum Lift/Dump:** 16 in (40.64 cm) - **Reach At Max Lift And Dump:** 16 in (40.64 cm) - **Turn Radius From Center - Bucket:** 83 in (210.82 cm) - **Turn Radius From Center - Coupler:** 51.8 in (131.57 cm) - **Turn Radius From Center - Machine Rear:** 64.5 in (163.83 cm) - **Turning Radius From Center - Inc Bucket:** 85.24 in (216.51 cm) - **Vehicle Width Over Tires:** 66 in (167.64 cm) - **Weight:** 6559 lbs (2975.12 kg) - **Wheel Base:** 3.63 ft (1.11 m) - **Wheelbase:** 3.63 ft (1.11 m) - **Width:** 5.5 ft (1.68 m) - **Width Over Tires:** 5.5 ft (1.68 m) ### Engine - **Bore:** 3.7 in (9.4 cm) - **Displacement:** 203 cu in (3326.58 cu cm) - **Engine Make:** 2236 - **Engine Model:** Cat C3.3B DIT (turbo) - **Gross Power:** 74.3 hp (55.41 kw) - **Gross Power - Sae J1995:** 74.3 hp (55.41 kw) - **Net Flywheel Power:** 73.2 hp (54.59 kw) - **Net Power - Iso 9249:** 73.9 hp (55.11 kw) - **Net Power - Sae 1349:** 73.2 hp (54.59 kw) - **Peak Torque - 1,500 Rpm - Sae J1995:** 195 lbs ft (264.38 nm) - **Stroke:** 4.7 in (11.94 cm) ### General Specifications - **A Wheelbase (since 2015):** 43.5 in (1105 mm) - **B Length without bucket (since 2015):** 108.9 in (2767 mm) - **Blade surface height at level lift arms (since 2015):** 54.6 in (1387 mm) - **Blade surface height at maximum height (since 2015):** 118.9 in (3020 mm) - **Blade surface height at minimum lift (since 2015):** 3.1 in (78 mm) - **Bore (since 2015):** 3.7 in (94 mm) - **Breakout force - lift (since 2015):** 3775 lbf (16.79 kN) - **Breakout force - lift (since 2017):** 3775 lbf (1712.5 kgf) - **Breakout force - tilt (since 2015):** 4751 lbf (21.14 kN) - **Breakout force - tilt (since 2017):** 4751 lbf (2155.2 kgf) - **Breakout force, tilt cylinder (since 2015):** 5074 lbf (22.57 kN) - **Breakout force, tilt cylinder (since 2017):** 5074 lbf (2302 kgf) - **C Length with bucket on ground (since 2015):** 137.3 in (3487 mm) - **Carriage height above blade top (since 2015):** 36.5 in (926 mm) - **Carriage overall width without step (since 2015):** 45.7 in (1160 mm) - **Carriage step additional width (since 2015):** 4.2 in (106 mm) - **category (since 2020):** SKID STEERS - **Clearance at maximum lift/level bucket (since 2015):** 114.5 in (2909 mm) - **D Height to top of cab (since 2015):** 82.0 in (2082 mm) - **Dig depth with level bucket (since 2015):** -0.9 in (-22 mm) - **Displacement (since 2015):** 203 cu in (3.3 L) - **Dump (since 2015):** 2.4 - **Dump clearance at maximum lift/dump (since 2015):** 91.9 in (2334 mm) - **Engine Model (since 2015):** C3.3B DIT - **ENGINE POWER (since 2016):** 73 hp (54.44 kw) - **ENGINE POWER (since 2019):** 66 hp (49.22 kw) - **F Bucket pin height at maximum lift (since 2015):** 122.9 in (3122 mm) - **Floor angle at maximum lift/dump (since 2015):** -47.3 deg - **Floor angle at maximum lift/rack back (since 2015):** 87.8 deg - **Flywheel Power - Gross (SAE J1995) (since 2015):** 74.3 hp (55.4 kW) - **Flywheel Power - Net (SAE 1349) (since 2015):** 72.1 hp (53.8 kW) - **Flywheel Power - Net (SAE 1349) (since 2016):** 72.7 hp (54.2 kW) - **Flywheel Power - Net (SAE 1349)# (since 2016):** 72.1 hp (53.8 kW) - **Flywheel Power - Net (SAE 1349)\* (since 2018):** 73.2 hp (54.6 kW) - **Front clearance circle radius (with bucket) (since 2015):** 48.4 in (1228 mm) - **Fuel Tank Capacity (since 2015):** 27.7 US gal (105 L) - **G Bucket pin height at carry position (since 2015):** 7.5 in (190 mm) - **Ground Clearance (since 2015):** 7.7 in (195 mm) - **H Reach at maximum lift and dump (since 2015):** 16.0 in (408 mm) - **Hinge pin height at maximum lift (since 2015):** 122.8 in (3119 mm) - **Hydraulic Pressure, Standard (since 2015):** 3335 psi (23000 kPa) - **Hydraulic Pressure, XPS (since 2015):** 3335 psi (23000 kPa) - **Hydraulic Pump Capacity, Standard (since 2015):** 20 US gpm (76 L/min) - **Hydraulic Pump Capacity, XPS (since 2015):** 30 US gpm (112 L/min) - **Hydraulic System Capacity - (includes tank) (since 2015):** 13.2 US gal (50 L) - **Hydraulic Tank Capacity (since 2015):** 10.3 US gal (39 L) - **J Clearance at maximum lift and dump (since 2015):** 92.9 in (2359 mm) - **K Ground clearance (since 2015):** 7.7 in (195 mm) - **L Departure angle (since 2015):** 26 deg - **Lower (Empty, Float Down) (since 2015):** 3.6 - **M Bumper overhang behind rear axle (since 2015):** 40.2 in (1021 mm) - **Maximum floor angle at minimum lift (since 2015):** 23.4 deg - **Maximum overall height (since 2015):** 156.6 in (3977 mm) - **MODEL (since 2016):** 236D - **N Maximum dump angle (since 2015):** 48 deg - **No. Cylinders (since 2015):** 4 - **O Vehicle width over tires (since 2015):** 66.0 in (1676 mm) - **One Speed Forward (since 2015):** 0 - 7 mph - **One Speed Reverse (since 2015):** 0 - 7 mph - **OPERATING LOAD (since 2016):** 1,800 lbs (816.47 kg) - **Operating weight (since 2015):** 6559 lbs (2975 kg) - **OPERATING WIDTH (since 2016):** 66 in (167.64 cm) - **Overall length at minimum lift, level tine (since 2015):** 152.0 in (3861 mm) - **Overall length with bucket on ground (since 2015):** 140.8 in (3575 mm) - **P Turning radius from center - machine rear (since 2015):** 64.5 in (1639 mm) - **Q Turning radius from center - coupler (since 2015):** 51.8 in (1314 mm) - **R Turning radius from center - bucket (since 2015):** 83.0 in (2107 mm) - **Raise (since 2015):** 3.1 - **Rated bucket capacity (since 2015):** 0.54 cu yd (0.41 cu m) - **Rated Engine RPM (since 2015):** 2400 rpm - **Rated operating capacity (since 2015):** 1800 lbs (818 kg) - **RATED OPERATING CAPACITY (50%) (since 2019):** 1,800 lbs (816.47 kg) - **Reach at level lift arm/bucket (since 2015):** 53.9 in (1369 mm) - **Reach at maximum lift/dump (since 2015):** 14.8 in (375 mm) - **S Maximum reach with arms parallel to ground (since 2015):** 53.3 in (1353 mm) - **Shank front face reach at level lift arms (since 2015):** 31.6 in (802 mm) - **Shank front face reach at maximum height (since 2015):** 9.3 in (235 mm) - **Shank front face reach at minimum lift (since 2015):** 17.2 in (437 mm) - **Stroke (since 2015):** 4.7 in (120 mm) - **Struck capacity (since 2015):** 0.39 cu yd (0.3 cu m) - **T Rack back angle at maximum height (since 2015):** 91 deg - **Tipping load (since 2015):** 3600 lbs (1633 kg) - **Total (since 2015):** 9.1 - **Tread Width, Standard (since 2015):** 54 in (1371 mm) - **Two Speed Forward (since 2015):** 0 - 11 mph - **Width (since 2015):** 74.9 in (1902 mm) - **Width Over Tires (since 2015):** 66 in (1676 mm) ### Hydraulic - **Pump Flow Capacity:** 20 gpm (75.7 lpm) - **Relief Valve Pressure:** 3335 psi ### Hydraulic System - **Hydraulic Flow - High Flow - Hydraulic Power (Calculated):** 58 hp (43.25 kw) - **Hydraulic Flow - High Flow - Loader Hydraulic Flow:** 30 gpm (113.55 lpm) - **Hydraulic Flow - High Flow - Loader Hydraulic Pressure:** 3335 psi - **Hydraulic Flow - Standard - Hydraulic Power (Calculated):** 39 hp (29.08 kw) - **Hydraulic Flow - Standard - Loader Hydraulic Flow:** 20 gpm (75.7 lpm) - **Hydraulic Flow - Standard - Loader Hydraulic Pressure:** 3335 psi ### Loader - **Breakout Force:** 5074 lbs (2301.53 kg) - **Tipping Angle:** 3600 degrees ### Noise Level - **Inside Cab\*:** 83 dB(A) - **Note (1):** Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - **Note (2):** \*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. - **Note (3):** \*\*The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. - **Outside Cab\*\*:** 101 dB(A) ### Operating Specifications - **Breakout Force - Tilt Cylinder:** 5074 lbs (2301.53 kg) - **Note:** Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). - **Rated Operating Capacity:** 1800 lbs (816.47 kg) - **Rated Operating Capacity With Optional Counterweight:** 2000 lbs (907.19 kg) - **Tipping Load:** 3600 lbs (1632.93 kg) ### Operational - **Chain Box Fluid Capacity - Each Side:** 2.3 gal (8.71 l) - **Cooling System Fluid Capacity:** 3.7 gal (14 l) - **Fuel Capacity:** 27.7 gal (104.84 l) - **Hydraulic System Fluid Capacity:** 13.2 gal (49.96 l) - **Max Speed:** 10.6 mph (17.06 kph) - **Operating Speed:** 7 mph (11.27 kph) - **Operational Weight:** 6559 lbs (2975.12 kg) ### Power Train - **Travel Speed - Forward Or Reverse - One Speed:** 7 mph (11.27 kph) - **Travel Speed - Forward Or Reverse - Two Speed Option:** 10.6 mph (17.06 kph) ### Service Refill Capacities - **Chain Box - Each Side:** 2.3 gal (8.71 l) - **Cooling System:** 3.7 gal (14 l) - **Engine Crankcase:** 3 gal (11.36 l) - **Fuel Tank:** 27.7 gal (104.84 l) - **Hydraulic System:** 13.2 gal (49.96 l) - **Hydraulic Tank:** 10.3 gal (38.99 l) ### Weights - **Note:** Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). - **Operating Weight:** 6559 lbs (2975.12 kg) ## About this model The Caterpillar 236D is a compact skid steer loader designed for material handling, grading, loading, and general construction work. It features a vertical lift design for improved reach and lift height, making it suitable for truck loading and pallet handling. The 236D is commonly used in construction, landscaping, agriculture, and utility applications. Caterpillar equipped the model with a comfortable operator station, responsive controls, and compatibility with a wide range of attachments. Its compact frame supports maneuverability in confined job sites while maintaining strong performance for daily loader tasks. The 236D is part of Caterpillar's D Series skid steer lineup. ## Photos ![2016 Caterpillar 236D](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23383/769/73509d52-c9b5-4feb-9fa5-ed3813929782-hr.jpg) ![2016 Caterpillar 236D photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23383/769/1ec4fa98-1e23-4176-86fc-6aac7811be36-hr.jpg) ![2016 Caterpillar 236D photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23383/769/4c7eb933-4cf8-47cc-8ed4-bc9bbcc12c5a-hr.jpg) ![2016 Caterpillar 236D photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23383/769/594b261b-d9d5-4005-b252-11c122af8e26-hr.jpg) ![2016 Caterpillar 236D photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23383/769/6bd073d8-f934-4606-a201-b20635855980-hr.jpg) ![2016 Caterpillar 236D photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23383/769/aef7aca3-af08-4fbf-b2d0-eadbfb61e9eb-hr.jpg) ![2016 Caterpillar 236D photo 7](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23383/769/229a2b20-d637-456e-ada0-faed3b5b4c77-hr.jpg)