# 2011 Caterpillar 262C **URL:** > This machine has been sold or is not currently for sale. ## Listing details - **Price:** Sold - **Listing ID:** 89545216 - **Year:** 2011 - **Manufacturer:** Caterpillar - **Model:** 262C - **Category:** Skid Steer Loaders - **Hours:** 7525 - **Serial number:** CAT0262CLMST04323 - **Location:** Edmonton, Ab - **Auction starts:** 2026-11-03 ## Description Located in Lane 14 Spot 29, Enclosed Cab, Air Conditioner, Ride Control, Creep Mode, Joystick Steering, Control Pattern Changer, Hydraulic Coupler, 72 in Bucket Closing Time: 2026-11-03 09:16:00 AM ## Manufacturer specifications ### Cab - **Fops:** SAE J1043 SEPT87, ISO 3449:1992 Level I - **Fops Level Ii:** SAE J231 JAN81, ISO 3449:1992 Level II - **Rops:** SAE J1040 MAY94, ISO 3471:1994 ### Dimensions - **Bucket Pin Height - Carry Position:** 7.8 in (19.81 cm) - **Bucket Pin Height - Maximum Lift:** 10.59 ft (3.23 m) - **Bucket Pin Reach - Maximum Lift:** 14.7 in (37.34 cm) - **Bumper Overhang - Rear Axle:** 42.8 in (108.71 cm) - **Clearance At Max Lift And Dump:** 8.03 ft (2.45 m) - **Clearance At Maximum Lift And Dump:** 96.4 in (244.86 cm) - **Departure Angle:** 26 degrees - **Ground Clearance:** 8.81 in (22.38 cm) - **Height:** 6.8333 ft (2.08 m) - **Height - Top Of Cab:** 6.9 ft (2.1 m) - **Height To Top Of Cab:** 6.83 ft (2.08 m) - **Length:** 12.1667 ft (3.71 m) - **Length - With Bucket On Ground:** 145 in (368.3 cm) - **Length - Without Bucket:** 117 in (297.18 cm) - **Length W/O Bucket:** 10.25 ft (3.12 m) - **Length With Bucket:** 12.08 ft (3.68 m) - **Maximum Dump Angle:** 50 degrees - **Maximum Overall Height:** 160.4 in (407.42 cm) - **Maximum Reach - With Arms Parallel:** 50.5 in (128.27 cm) - **Rack Back Angle - Maximum Height:** 85 degrees - **Reach - Maximum Lift/Dump:** 30.7 in (77.98 cm) - **Reach At Max Lift And Dump:** 30.7 in (77.98 cm) - **Turn Radius From Center - Bucket:** 85.3 in (216.66 cm) - **Turn Radius From Center - Coupler:** 54.6 in (138.68 cm) - **Turn Radius From Center - Rear:** 68.1 in (172.97 cm) - **Turning Radius From Center - Inc Bucket:** 97.8 in (248.41 cm) - **Turning Radius From Center - Machine Rear:** 56.8 in (144.27 cm) - **Vehicle Width Over Tires:** 66 in (167.64 cm) - **Weight:** 7968 lbs (3614.23 kg) - **Wheel Base:** 4.07 ft (1.24 m) - **Wheelbase:** 4.07 ft (1.24 m) - **Width:** 5.5 ft (1.68 m) - **Width Over Tires:** 5.5 ft (1.68 m) ### Engine - **Bore:** 3.7 in (9.4 cm) - **Displacement:** 201 cu in (3293.81 cu cm) - **Engine Make:** 2236 - **Engine Model:** Cat C3.4 DIT - **Engine Power - Iso 14396:** 83 hp (61.89 kw) - **Gross Power:** 84 hp (62.64 kw) - **Gross Power - Sae J1995:** 84 hp (62.64 kw) - **Net Flywheel Power:** 82 hp (61.15 kw) - **Net Power:** 82 hp (61.15 kw) - **Net Power - Eec 80/1269:** 83 hp (61.89 kw) - **Net Power - Iso 9249 Eec:** 83 hp (61.89 kw) - **Net Power - Sae 1349:** 82 hp (61.15 kw) - **Number Of Cylinders:** 4 - **Power Measured @:** 2500 rpm - **Stroke:** 4.7 in (11.94 cm) ### General Specifications - **A Height to top of ROPS (since 2010):** 83 in (2104 mm) - **Approx. Machine Weight (since 2008):** 7968 lbs (3614 kg) - **B Length to coupler (since 2010):** 117 in (2979 mm) - **Blade surface height at level lift arms (since 2010):** 63.3 in (1608 mm) - **Blade surface height at maximum height (since 2010):** 123.2 in (3130 mm) - **Blade surface height at minimum lift (since 2010):** 3.5 in (90 mm) - **Bore (since 2010):** 3.7 in (94 mm) - **Breakout force - lift (since 2010):** 4991 lbf (2264 kg) - **Breakout force - lift (since 2013):** 4991 lbf (22.2 kN) - **Breakout force - tilt (since 2010):** 6587 lbf (2988 kg) - **Breakout force - tilt (since 2013):** 6587 lbf (29.3 kN) - **Bucket overall width (since 2010):** 72 in (1829 mm) - **C Length with bucket on ground (since 2010):** 145 in (3692 mm) - **Capacity at 50% with counter- weight (since 2008):** 2945 lbs (1336 kg) - **Carriage height above blade top (since 2010):** 36.6 in (930 mm) - **Carriage overall width without step (since 2010):** 45.6 in (1159 mm) - **Carriage step additional width (since 2010):** 4.2 in (106 mm) - **Clearance at maximum lift/level bucket (since 2010):** 118.7 in (3015 mm) - **D Maximum overall height (since 2010):** 160 in (4075 mm) - **Dig depth with level bucket (since 2010):** 1.3 in (33 mm) - **Displacement (since 2010):** 201 cu in (3.3 L) - **Dump clearance at maximum lift/dump (since 2010):** 96.5 in (2450 mm) - **Engine Model (since 2008):** Cat C3.4 DIT - **F Departure angle (since 2010):** 26 deg - **Floor angle at maximum lift/dump (since 2010):** 40.1 deg - **Floor angle at maximum lift/rack back (since 2010):** 94.8 deg - **Flywheel Power: Gross (since 2013):** 84 hp (63 kW) - **Flywheel Power: Net (since 2010):** 82 hp (61 kW) - **Front clearance circle radius (with bucket) (since 2010):** 99.0 in (2515 mm) - **Front clearance circle radius (with bucket) (since 2012):** 103 in (2616 mm) - **Front clearance circle radius (with bucket) (since 2013):** 103.0 in (2616 mm) - **Fuel Tank Capacity (since 2010):** 26 US gal (98 L) - **G Wheelbase (since 2010):** 49 in (1240 mm) - **Gross (since 2010):** 84 hp (63 kW) - **Ground clearance (since 2010):** 8.9 in (225 mm) - **H Bumper overhang from axle (since 2010):** 43 in (1089 mm) - **Height to Top of Cab (since 2008):** 82.8 in (2104 mm) - **Hinge pin height at carry position (since 2010):** 7.8 in (200 mm) - **Hinge pin height at maximum lift (since 2010):** 127.3 in (3233 mm) - **Hydraulic Cycle Time, - Empty Bucket - Dump (HF) (since 2010):** 2.5 sec (2.5 Seconds) - **Hydraulic Cycle Time, - Empty Bucket - Lower (Empty, - Float Down) (HF) (since 2010):** 4.7 sec (4.6 Seconds) - **Hydraulic Cycle Time, - Empty Bucket - Raise (HF) (since 2010):** 4.5 sec (4.7 Seconds) - **Hydraulic Cycle Time, - Empty Bucket - Total (HF) (since 2010):** 11.7 sec (11.8 Seconds) - **Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Dump (since 2013):** 2.5 sec (2.5 Seconds) - **Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Lower (Empty, Float Down) (since 2013):** 4.7 sec (4.6 Seconds) - **Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Raise (since 2013):** 4.5 sec (4.7 Seconds) - **Hydraulic Cycle Time, Empty - Bucket, Standard (Optional) - Total (since 2013):** 11.7 sec (11.8 Seconds) - **Hydraulic Pressure - Standard (since 2013):** 3335 psi (23000 kPa) - **Hydraulic Pressure - XPS (since 2013):** 4061 psi (28000 kPa) - **Hydraulic Pump Capacity (since 2010):** 22 US gpm (84 L/min) - **Hydraulic Pump Capacity - Standard (since 2013):** 22 US gpm (84 L/min) - **Hydraulic Pump Capacity - XPS (since 2013):** 33 US gpm (125 L/min) - **Hydraulic System Capacity - (includes tank) (since 2010):** 15 US gal (57 L) - **Hydraulic Tank Capacity (since 2010):** 11 US gal (42 L) - **J Clearance at maximum lift/dump (since 2010):** 96 in (2450 mm) - **K Floor angle at maximum lift/dump (since 2010):** 50 deg - **L Floor angle at maximum lift/rack (since 2010):** 85 deg - **Length to Coupler (since 2008):** 117.3 in (2979 mm) - **M Clearance at maximum lift/level (since 2010):** 120 in (3043 mm) - **Maximum floor angle - at carry position (since 2010):** 26 deg - **Maximum floor angle at minimum lift (since 2010):** 26 deg - **Maximum Forward Speed (since 2008):** 12.0 mph (19.3 km/h) - **Maximum overall height (since 2010):** 165.4 in (4200 mm) - **N Hinge pin height at maximum lift (since 2010):** 127 in (3233 mm) - **Net Power (since 2008):** 82 hp (61 kW) - **No. Cylinders (since 2010):** 4 - **O Reach at level lift arm/bucket (since 2010):** 51 in (1283 mm) - **One Speed Forward (since 2010):** 0 - 8 mph - **One Speed Reverse (since 2010):** 0 - 8 mph - **Operating weight (since 2010):** 7904 lbs (3585 kg) - **Optional (since 2013):** 60 in (1524 mm) - **Overall length at minimum lift, level tine (since 2010):** 160.0 in (4065 mm) - **Overall length at minimum lift, level tine (since 2012):** 160 in (4065 mm) - **Overall length with bucket on ground (since 2010):** 151.5 in (3847 mm) - **Product Identification Prefix (since 2008):** MST - **Rated bucket capacity (since 2010):** 0.44 cu yd (0.34 cu m) - **Rated Engine RPM (since 2010):** 2500 rpm - **Rated operating capacity (since 2010):** 2700 lbs (1225 kg) - **Rated Operating Capacity at 50% (since 2008):** 2700 lbs (1225 kg) - **Reach at level lift arm/bucket (since 2010):** 49.7 in (1263 mm) - **Reach at maximum lift/dump (since 2010):** 30.7 in (781 mm) - **Shank front face reach at level lift arms (since 2010):** 29.1 in (738 mm) - **Shank front face reach at maximum height (since 2010):** 27.4 in (697 mm) - **Shank front face reach at minimum lift (since 2010):** 16.1 in (410 mm) - **Stroke (since 2010):** 4.7 in (120 mm) - **Struck capacity (since 2010):** 0.37 cu yd (0.28 cu m) - **Tipping load (since 2010):** 4180 lbs (1896 kg) - **Tread Width: Standard (since 2013):** 54 in (1371 mm) - **Two Speed Forward (since 2010):** 0 - 12 mph - **Two Speed Reverse (since 2010):** 0 - 12 mph - **Width (since 2010):** 66.0 in (1676 mm) - **Width (since 2012):** 66 in (1676 mm) - **Width over Tires (since 2008):** 66 in (1676 mm) - **Width Over Tires (since 2010):** 66 in (1676 mm) ### Hydraulic - **Pump Flow Capacity:** 22 gpm (83.27 lpm) - **Relief Valve Pressure:** 3335 psi ### Hydraulic System - **Hydraulic Flow (1):** Standard - **Hydraulic Flow (2):** High Flow XPS - **Hydraulic Power:** 42.8 hp (31.92 kw) - **Loader Hydraulic Flow:** 22 gpm (83.27 lpm) - **Loader Hydraulic Pressure:** 3335 psi - **Maximum Loader Hydraulic Flow:** 33 gpm (124.91 lpm) - **Maximum Loader Hydraulic Pressure:** 4061 psi ### Loader - **Breakout Force:** 7315 lbs (3318.03 kg) - **Bucket Capacity:** 0.6 cu yd - **Operating Load Rating:** 2700 lbs (1224.7 kg) - **Tipping Angle:** 5400 degrees ### Operating Specifications - **Breakout Force - Tilt Cylinder:** 7315 lbs (3318.03 kg) - **Rated Operating Capacity:** 2700 lbs (1224.7 kg) - **Rated Operating Capacity With Optional Counterweight:** 2945 lbs (1335.83 kg) - **Tipping Load:** 5400 lbs (2449.4 kg) ### Operational - **Alternator Supplied Amperage:** 90 amps - **Chain Box Fluid Capacity - Each Side:** 2.6 gal (9.84 l) - **Cooling System Fluid Capacity:** 3.7 gal (14 l) - **Engine Oil Fluid Capacity:** 2.6 gal (9.84 l) - **Fuel Capacity:** 26 gal (98.41 l) - **Hydraulic System Fluid Capacity:** 15 gal (56.78 l) - **Max Speed:** 7.7 mph (12.39 kph) - **Operating Voltage:** 12 V - **Operational Weight:** 7968 lbs (3614.23 kg) ### Power Train - **Travel Speed Forward:** 7.7 mph (12.39 kph) - **Travel Speed Forward - 2-Speed Option:** 12 mph (19.31 kph) - **Travel Speed Reverse:** 7.7 mph (12.39 kph) - **Travel Speed Reverse - 2-Speed Option:** 12 mph (19.31 kph) - **Xdp Option Speed - With Tires:** 6.5 mph (10.46 kph) - **Xdp Option Speed - With Vts Tracks:** 4.8 mph (7.72 kph) ### Service Refill Capacities - **Chain Box - Each Side:** 2.6 gal (9.84 l) - **Cooling System:** 3.7 gal (14 l) - **Engine Crankcase:** 2.6 gal (9.84 l) - **Fuel Tank:** 26 gal (98.41 l) - **Hydraulic System:** 15 gal (56.78 l) - **Hydraulic Tank:** 11 gal (41.64 l) ### Weights - **Operating Weight:** 7968 lbs (3614.23 kg) ## About this model The Caterpillar 262C is a skid steer loader designed for material handling, grading, loading, and general construction work. It is part of Caterpillar's compact equipment lineup and is commonly used on job sites that require maneuverability in confined spaces. The 262C features a vertical lift design, which supports improved reach and load placement at truck height and other elevated positions. It is compatible with a range of attachments for digging, lifting, sweeping, and site preparation. The machine is built for utility, landscaping, agriculture, and construction applications where compact size and versatile performance are required. ## Photos ![2011 Caterpillar 262C](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/8c0df294-f470-433f-88f0-cc5bc3fc31a2-hr.jpg) ![2011 Caterpillar 262C photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/dba8234d-0718-3ef5-b6df-7896a84d28dc-hr.jpg) ![2011 Caterpillar 262C photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/2f8d6db2-5ccd-3c87-9f5b-5f2237d8fa18-hr.jpg) ![2011 Caterpillar 262C photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/d96390f1-0cb9-319f-b3d4-ab7d2ae2fa44-hr.jpg) ![2011 Caterpillar 262C photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/9ef12525-76a4-35e1-87b7-625b5ba5e616-hr.jpg) ![2011 Caterpillar 262C photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/a5667925-b30e-4589-aeef-a5d02096bde8-hr.jpg) ![2011 Caterpillar 262C photo 7](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/1256490d-a3e5-47bc-a0a5-065367e2944b-hr.jpg) ![2011 Caterpillar 262C photo 8](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/23207/39/110c3226-4704-4073-a83d-da5a0726952b-hr.jpg)