# 2020 Caterpillar TL1055D for Sale in FRESNO, CA **URL:** ## Listing details - **Price:** $110,000.00 USD - **Listing ID:** 88803934 - **Year:** 2020 - **Manufacturer:** Caterpillar - **Model:** TL1055D - **Category:** Telehandlers - **Hours:** 1885 - **Serial number:** ML502745 - **Location:** FRESNO, CA ## Description ALARM, BACK-UP, STANDARD, AXLE, STANDARD, BELT, SEAT, 3", CANOPY, OPEN, CLIMATE PACK, STANDARD, COUPLER, MANUAL, IT, FENDER, FRONT, INSTRUCTIONS, ANSI, LANE 3 ORDER, LEVER, MANUAL, FNR, LOADCHART, NACD, TL1055D, MANUAL, OPER. MAINT. ENGLISH, MONITOR, NONE, Online Owner's Manual , PACK, ROLL ON/ROLL OFF, TL, PREPARATION PACK, AM-N, Ride Control, STEERING, STANDARD, SUN SCREEN, ROOF, NONE, TIRES, 400/75-28, FS, MT, TL1055D NORTH AMERICAN ORDER ## Manufacturer specifications ### Axles - **Types (1):** Trunnion mounted planetary 55 degree steer axles. - **Types (2):** High bias limited slip differential on front axle. ### Boom Performance - **Boom Down:** 13 s - **Boom Up:** 15 s - **Tele In:** 16.3 s - **Tele Out:** 18.5 s ### Brakes - **Parking Brakes:** Wet disc, spring applied hydraulic release on front axle - **Service Brakes:** Inboard wet disc brakes on front and rear axles ### Dimensions - **Height:** 8.25 ft (2.51 m) - **Length:** 25.75 ft (7.85 m) - **Weight:** 31879 lbs (14457.6 kg) - **Width:** 8.3333 ft (2.54 m) ### Engine - **Engine Model:** Cat C4.4 ACERT\* - **Gross Power - Basic:** 142.1 hp (105.97 kw) - **Note:** \*Meets U.S. EPA Tier 4 Final emission standards. ### Hydraulic System - **Auxiliary Hydraulic Flow:** 25 gpm (94.63 lpm) - **Auxiliary Hydraulic Pressure:** 3307 psi - **Note:** Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. - **Pump Type:** Variable displacement load sensing axial piston pump - **System Operating Pressure:** 3771 psi ### Operating Specifications - **Capacity At Maximum Height (O/R Down):** 5000 lbs (2267.96 kg) - **Capacity At Maximum Reach (O/R Down):** 2500 lbs (1133.98 kg) - **Drawbar Pull - Loaded:** 25605 lbs ft (34715.26 nm) - **Frame Leveling:** 10 degrees - **Maximum Forward Reach:** 42 ft (12.8 m) - **Maximum Lift Height (O/R Down):** 54.9 ft (16.73 m) - **Rated Load Capacity:** 10000 lbs (4535.93 kg) - **Top Travel Speed:** 20.5 mph (32.99 kph) - **Turning Radius - Over Tires:** 14.1 ft (4.3 m) ### Operational - **Operating Weight:** 31879 lbs (14460.09 kg) ### Service Refill Capacities - **Diesel Exhaust Fluid (Def) Tank:** 5.7 gal (21.57 l) - **Fuel Tank:** 38 gal (143.83 l) - **Hydraulic System:** 49 gal (185.47 l) ### Tires - **Optional:** 400/75-28 Foam Filled; 14.00-24 Solid; 14.00 24 16PR; 14.00 24 12PR Foam Filled - **Standard:** 400/75-28 Duraforce ### Transmission Speeds - **Forward:** 4 speed - **Reverse:** 3 speed ### Work Tools - **Carriages - Dual Positioning:** 50 in (127 cm) - **Carriages - Side Shift:** 48 in (121.92 cm) - **Carriages - Standard Rotate:** 50 in (127 cm) - **Carriages - Standard Tilt:** 50 in (127 cm) - **Carriages - Swing:** 100 degrees, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 10,000 lb Capacity, 5,000 lb Swung) - **Carriages - Wide Rotate:** 72 in (182.88 cm) - **Carriages - Wide Tilt:** 72 in (182.88 cm) - **Cubing Forks:** \[2\] 1220 mm, 50 mm 50 mm (\[2\] 48 in, 2 in 2 in) - **Fork Extensions\*:** 90 in (228.6 cm) - **Hydraulic It Coupler:** Includes Auxiliary Electrics - **Lumber Forks - Option 1:** \[2\] 1525 mm, 45 mm 180 mm (\[2\] 60 in, 1.75 in 7 in) - **Lumber Forks - Option 2:** \[2\] 1829 mm, 50 mm 150 mm (\[2\] 72 in, 2 in 6 in) - **Note:** \*For use with 1829 mm (72 in) Lumber Forks. - **Pallet Forks - Option 1:** \[2\] 1525 mm, 60 mm 150 mm (\[2\] 60 in, 2.36 in 6 in) - **Pallet Forks - Option 2:** \[2\] 1220 mm, 60 mm 100 mm (\[2\] 48 in, 2.36 in 4 in) ## About this model The Caterpillar TL1055D is a telescopic handler in Caterpillar's telehandler lineup, designed for material handling, lifting, and placement on construction and industrial job sites. It features a maximum lift capacity of 10,000 lb and a maximum lift height of 55 ft, making it suitable for loading, unloading, and positioning materials at elevated locations. The TL1055D uses a four-wheel-drive chassis and a telescopic boom for reach and versatility in confined or uneven terrain. Common applications include construction, masonry, framing, and general site logistics. The model is part of Caterpillar's D-series telehandlers, built for productivity and operator visibility. ## Photos ![2020 Caterpillar TL1055D](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1iN2I5MjQxYWM1MWVlNGVmY2NmM2RmOGU1ZDNiNDY2ZSYkdHh0PVFVSU5OJTIwQ09NUEFOWSY0MzYw) ![2020 Caterpillar TL1055D photo 2](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1mYzExZjdiOTBlYTkwZjgwZDdhYzlkNmM5YTBhMDUxYyYkdHh0PVFVSU5OJTIwQ09NUEFOWSY3MDc0) ![2020 Caterpillar TL1055D photo 3](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1iYjZiZDliMWEyMDJkYTBmYjcxZDExZGRiYjM2ZDYxZSYkdHh0PVFVSU5OJTIwQ09NUEFOWSY0MjMwOA==) ![2020 Caterpillar TL1055D photo 4](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1kYTk0Yjc5NmVkYzBiYzYxYzk3YWZjYmM1ODBmNGYxNyYkdHh0PVFVSU5OJTIwQ09NUEFOWSY2MzYzOA==) ![2020 Caterpillar TL1055D photo 5](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04NWMyZmRkMjBiNzBjOGVjOWRiYjc1MDAxNDFlMzI4YiYkdHh0PVFVSU5OJTIwQ09NUEFOWSYzNjkwOA==) ![2020 Caterpillar TL1055D photo 6](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1iMmNhM2YwODhhNTcyMWFmYmZkNjdhOWM5OTkxMzQwNCYkdHh0PVFVSU5OJTIwQ09NUEFOWSYyNDYxMg==) ![2020 Caterpillar TL1055D photo 7](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz05MTRmMmJhZDBjOGJlZTIyOTc0N2ExN2ZlOGZhODJkOSYkdHh0PVFVSU5OJTIwQ09NUEFOWSYyMDYwNA==) ![2020 Caterpillar TL1055D photo 8](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1jYWY2ZGViOTE0YWQ1OTVhZGJmMjIxOTYwZjczNThjZCYkdHh0PVFVSU5OJTIwQ09NUEFOWSYzNTQwNw==)