# 2018 Caterpillar TL1255D for Sale in CA **URL:** ## Listing details - **Price:** $115,000.00 USD - **Listing ID:** 88562573 - **Year:** 2018 - **Manufacturer:** Caterpillar - **Model:** TL1255D - **Category:** Telehandlers - **Hours:** 3525 - **Serial number:** ML701384 - **Location:** CA ## Description ALARM, BACK-UP, STANDARD, AXLE, STANDARD, BELT, SEAT, 3" RETRACTABLE, Cab - Enclosed, CARRIAGE, STANDARD 72", CLIMATE PACK, STANDARD, COUPLER, MANUAL, IT, ELECTRICAL HARNESS, COUPLER, ENVIRONMENTAL CONTROL,AIR CON, FENDER, FRONT, FORK, DUAL TAPER 2" X 6" X 72", INSTRUCTIONS, ANSI, LANE 3 ORDER, LEVER, MANUAL, FNR/WIPERS/IND, LIGHTS, ROADING, RH, LOADCHART, NACD, TL1255D, MANUAL, OPER. MAINT. ENGLISH, MONITOR, NONE, Online Owner's Manual , PACK, ROLL ON/ROLL OFF, TL, PRODUCT LINK READY, A/C, RIDE CONTROL, NONE, STEERING, STANDARD, SUN SCREEN, ROOF, TIRES, 400/75-28, FS, MT, FOAM, TL1255D NORTH AMERICAN ORDER, WINDOW, REAR, STANDARD, WORKLIGHTS, A/C COMPATIBLE ## Manufacturer specifications ### Axles - **Types (1):** Trunnion mounted planetary 55 degree steer axles. - **Types (2):** High bias limited slip differential on front axle. ### Boom Performance - **Boom Down:** 14.4 s - **Boom Up:** 16.7 s - **Tele In:** 16.3 s - **Tele Out:** 18.5 s ### Brakes - **Parking Brakes:** Wet disc, spring applied hydraulic release on front axle - **Service Brakes:** Inboard wet disc brakes on front and rear axles ### Dimensions - **Height:** 8.25 ft (2.51 m) - **Length:** 20.75 ft (6.32 m) - **Weight:** 34097 lbs (15463.49 kg) - **Width:** 8.3333 ft (2.54 m) ### Engine - **Engine Model:** Cat C4.4 ACERT\* - **Gross Power - Basic:** 142.1 hp (105.97 kw) - **Note:** \*Meets U.S. EPA Tier 4 Final emission standards. ### Hydraulic System - **Auxiliary Hydraulic Flow:** 25 gpm (94.63 lpm) - **Auxiliary Hydraulic Pressure:** 3307 psi - **Note:** Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. - **Pump Type:** Variable displacement load sensing axial piston pump - **System Operating Pressure:** 3771 psi ### Operating Specifications - **Capacity At Maximum Height (O/R Down):** 5000 lbs (2267.96 kg) - **Capacity At Maximum Reach (O/R Down):** 3500 lbs (1587.58 kg) - **Drawbar Pull - Loaded:** 25605 lbs ft (34715.26 nm) - **Frame Leveling:** 10 degrees - **Maximum Forward Reach:** 42 ft (12.8 m) - **Maximum Lift Height:** 54.6 ft (16.64 m) - **Maximum Lift Height (O/R Down):** 54.6 ft (16.64 m) - **Rated Load Capacity:** 12000 lbs (5443.12 kg) - **Top Travel Speed:** 20.5 mph (32.99 kph) - **Turning Radius - Over Tires:** 14 ft (4.27 m) ### Operational - **Operating Weight:** 34361 lbs (15585.91 kg) ### Service Refill Capacities - **Diesel Exhaust Fluid (Def) Tank:** 5.7 gal (21.57 l) - **Fuel Tank:** 38 gal (143.83 l) - **Hydraulic System:** 50 gal (189.25 l) ### Tires - **Optional:** 400/75-28 Foam Filled; 14.00-24 Solid; 17.5 25 16PR; 17.5 25 12PR Foam Filled - **Standard:** 400/75-28 Duraforce ### Transmission Speeds - **Forward:** 4 speed - **Reverse:** 3 speed ### Work Tools - **Carriages - Dual Positioning:** 50 in (127 cm) - **Carriages - Side Shift:** 48 in (121.92 cm) - **Carriages - Standard Rotate:** 50 in (127 cm) - **Carriages - Standard Tilt:** 50 in (127 cm) - **Carriages - Swing (1):** 100 degrees, 1829 mm, 4536 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 10,000 lb Capacity, 5,000 lb Swung) - **Carriages - Swing (2):** 180 degrees, 1824 mm, 5443 kg (180 degrees, 72 in, 12,000 lb) - **Carriages - Wide Rotate:** 72 in (182.88 cm) - **Carriages - Wide Tilt:** 72 in (182.88 cm) - **Cubing Forks:** \[2\] 1220 mm, 50 mm 50 mm (\[2\] 48 in, 2 in 2 in) - **Fork Extensions\*:** 90 in (228.6 cm) - **Hydraulic It Coupler:** Includes Auxiliary Electrics - **Lumber Forks:** \[2\] 1829 mm, 50 mm 150 mm (\[2\] 72 in, 2 in 6 in) - **Note:** \*For use with 1829 mm (72 in) Lumber Forks. - **Pallet Forks - Option 1:** \[2\] 1525 mm, 60 mm 150 mm (\[2\] 60 in, 2.36 in 6 in) - **Pallet Forks - Option 2:** \[2\] 1220 mm, 60 mm 125 mm (\[2\] 48 in, 2.36 in 5 in) ## About this model The Caterpillar TL1255D is a telehandler designed for material handling, lifting, and placement tasks on construction and industrial job sites. It is part of Caterpillar's D Series telehandler line and is used for moving palletized loads, construction materials, and other heavy items at height. The TL1255D features a telescopic boom, four-wheel drive, and rough-terrain capability for operation on uneven ground. Common applications include building construction, masonry, agriculture, and general site logistics. As a Caterpillar telehandler, the TL1255D is built for load handling, reach, and maneuverability in confined or demanding work environments. ## Photos ![2018 Caterpillar TL1255D](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1lNzc5ZWFhZjRkZGIxZjI5ODAzZGFkZjlmMjg2NWQwNSYkdHh0PVFVSU5OJTIwQ09NUEFOWSY1NTI3MQ==) ![2018 Caterpillar TL1255D photo 2](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04MTViMjFjYThhMTMwNjRhYzkxNGVjODk0NWVlNWMyOCYkdHh0PVFVSU5OJTIwQ09NUEFOWSYyNjIx) ![2018 Caterpillar TL1255D photo 3](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1hMjU2NDIwNzg5MGQwOTU1OTQxYTc4ZjdlMTI2ODQ0MSYkdHh0PVFVSU5OJTIwQ09NUEFOWSY1ODYxNg==) ![2018 Caterpillar TL1255D photo 4](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz04ZDgwM2RiODViZTE4Y2IxOTEzNDUzNDE2ODQ2YmJjNyYkdHh0PVFVSU5OJTIwQ09NUEFOWSY0NjExNw==) ![2018 Caterpillar TL1255D photo 5](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz05NDU3NDlmNDEwOWRhNWQ0YzE3OTRmZDY5ZDE3Y2E2OSYkdHh0PVFVSU5OJTIwQ09NUEFOWSY5MjMx) ![2018 Caterpillar TL1255D photo 6](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz1mMDE3ZDVkYzNhNTI0ODc0OWVjZTRlNWZkY2I4ZDVkYyYkdHh0PVFVSU5OJTIwQ09NUEFOWSY2MjY0Mg==) ![2018 Caterpillar TL1255D photo 7](http://s7d2.scene7.com/is/image/CatUsedProduction/wtk?JHNyYz05YzlmZjc2ZGFhZTU2NTlmOTIzZGViZGUwMTRiMzE2ZCYkdHh0PVFVSU5OJTIwQ09NUEFOWSY1MTYyMg==)