# Caterpillar 906M for Sale in Meridian, ID **URL:** ## Listing details - **Price:** $58,965.00 USD - **Listing ID:** 84196459 - **Manufacturer:** Caterpillar - **Model:** 906M - **Category:** Wheel Loaders - **Type:** Compact Wheel Loaders - **Hours:** 3384 - **Serial number:** H6604716 - **Location:** Meridian, ID ## Description 906M WHEEL LOADER S3B CERT, AIR CONDITIONER, AND HEATER, AIR INTAKE, STANDARD, ALARM, BACK UP, ANTIFREEZE, -36C (-32F), CAB, DELUXE, SINGLE BRAKE, CPLR, VERT, HIGH FLOW, ENGINE, 55KW, C3.3B, T4F, HRC, FAN, COOLING, ON DEMAND, FEATURE PACKAGE, LOAD/ROAD, HEATER, ENGINE COOLANT, 120V, HYDRAULIC OIL, STANDARD, INSTRUCTIONS, ANSI, JOYSTICK,E/H,TANDEM VALVE, LIGHTS, STD, HALOGEN, LIGHTS,ROADING,RH DIP,HALOGEN, Online Owner's Manual , PACK, ROLL ON/ROLL OFF BY SEA, PRODUCT LINK, CELLULAR PL641, RUST PREVENTATIVE APPLICATOR, SEAT BELT, RETRACTABLE 3", SEAT, DELUXE, SECURITY SYSTEM, NONE, SERIALIZED TECHNICAL MEDIA KIT, SOUND SUPPRESSION, STANDARD, TIRES, 340/80 R18,FS,DURAFORCE, TRANS 22 MPH DIFF LOCK E/H, VALVE, DRAIN, ECO ## Manufacturer specifications ### Bucket - **Bucket Capacities:** 1.6 cu yd (1.22 cu m) - **Bucket Capacities - ISO Coupler:** 0.75-1.2 m3 - **Bucket Capacities - SSL Style Coupler:** 1 - 2 cu yd (1 - 1 cu m) - **General Purpose:** 1.2 yd - **Light Material:** 1.6 cu yd (1.22 cu m) ### Cab - **FOPS:** SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II. - **ROPS:** SAE J1040 MAY94 ISO 3471-1994. ### Cab Features - Canopy - **External Knock Back Mirrors:** Standard - **Lockable Storage Box:** Standard ### Dimensions - With ISO Coupler - Approximate - **Dig Depth:** 3.7 in (9.4 cm) - **Turning Radius - Inside Tire:** 7.3 ft (2.23 m) - **Turning Radius - Over Bucket:** 14.5 ft (4.42 m) ### Dimensions - With SSL Coupler - Approximate - **Dig Depth:** 3.5 in (8.89 cm) - **Turning Radius - Inside Tire:** 7.3 ft (2.23 m) - **Turning Radius - Over Bucket:** 14.6 ft (4.45 m) ### Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler - **Articulation Angle:** 39 degrees - **Clearance - Bucket at 45 degrees \*:** 8.1 ft (2.47 m) - **Clearance - Level Bucket\*\*:** 10 ft (3.05 m) - **Departure Angle:** 33 degrees - **Dig Depth\*\*:** 3.7 in (9.4 cm) - **Dump Angle at Full Lift:** 45 degrees - **Height - Bucket Pin\*\*:** 10.6 ft (3.23 m) - **Height - Ground Clearance\*\*:** 1 ft (0.3 m) - **Height - Ground to Cab\*\*:** 8.1 ft (2.47 m) - **Length - Overall\*:** 18 ft (5.49 m) - **Length - Wheel Base:** 7.1 ft (2.16 m) - **Machine Width:** 6 ft (1.83 m) - **Note (1):** \*Vary with bucket. - **Note (2):** \*\*Vary with tire. - **Note (3):** Dimensions listed are for a machine configured with general purpose buckets bolt-on cutting edges 75 kg (165 lb) operator no air conditioner and Dunlop 405/70 SPT9 tires. - **Reach - Bucket at 45 degrees\*:** 2.4 ft (0.73 m) - **Turning Radius - Inside of Tires:** 7.4 ft (2.26 m) - **Turning Radius - Over Bucket:** 14.5 ft (4.42 m) - **Width - Bucket:** 6.2 ft (1.89 m) - **Width - Tread Center:** 4.6 ft (1.4 m) ### Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler - **Articulation Angle:** 39 degrees - **Clearance - Bucket at 45 degrees \*:** 7.7 ft (2.35 m) - **Clearance - Level Bucket\*\*:** 10 ft (3.05 m) - **Departure Angle:** 33 degrees - **Dig Depth\*\*:** 4.2 in (10.67 cm) - **Dump Angle at Full Lift:** 45 degrees - **Height - Bucket Pin\*\*:** 10.6 ft (3.23 m) - **Height - Ground Clearance\*\*:** 1 ft (0.3 m) - **Height - Ground to Cab\*\*:** 8.1 ft (2.47 m) - **Length - Overall\*:** 18.5 ft (5.64 m) - **Length - Wheel Base:** 7.1 ft (2.16 m) - **Machine Width:** 6 ft (1.83 m) - **Reach - Bucket at 45 degrees\*:** 2.7 ft (0.82 m) - **Turning Radius - Inside of Tires:** 7.4 ft (2.26 m) - **Turning Radius - Over Bucket:** 14.6 ft (4.45 m) - **Width - Bucket:** 6.2 ft (1.89 m) - **Width - Tread Center:** 4.6 ft (1.4 m) ### Drive System - **Forward - High Range:** 22 mph (35.41 kph) - **Forward - Range 1:** 6 mph (9.66 kph) - **Forward - Range 2:** 12 mph (19.31 kph) - **Reverse - High Range:** 22 mph (35.41 kph) - **Reverse - Range 1:** 6 mph (9.66 kph) - **Reverse - Range 2:** 12 mph (19.31 kph) ### Engine - **Bore:** 3.7 in (9.4 cm) - **Displacement:** 201 cu in (3293.81 cu cm) - **Emissions:** \*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards. - **Engine Model:** Cat C3.3B DIT\* - **Maximum Gross Power:** 73 hp (54.44 kw) - **Maximum Gross Power - ISO 14396:** 73 hp (54.44 kw) - **Maximum Gross Power - ISO 14396 (DIN):** 74 hp (55.18 kw) - **Maximum Gross Power - SAE J1995:** 74 hp (55.18 kw) - **Maximum Gross Torque - ISO 14396:** 192 lbs ft (260.31 nm) - **Maximum Net Power - ISO 9249:** 69 hp (51.45 kw) - **Maximum Net Power - SAE J1349:** 68 hp (50.71 kw) - **Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269:** 191 lbs ft (258.96 nm) - **Maximum Net Torque - SAE J1349:** 189 lbs ft (256.25 nm) - **Net Power:** 74 hp (55.18 kw) - **Note (5):** The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions. - **Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269:** 74 hp (55.18 kw) - **Rated Net Power - 2,400 rpm - SAE J1349:** 73 hp (54.44 kw) - **Rated Net Power - 2,500 rpm - SAE J1349:** 68 hp (50.71 kw) - **Stroke:** 4.7 in (11.94 cm) ### General Specifications - **Breakout Force (since 2021):** 9666 lbs ft (13105.16 nm) - **Bucket Capacity (since 2019):** 1.0 - 2.0 (0.8 - 1.5) - **Bucket Capacity (since 2021):** 1.0 - 1.6 (.76 - 1.2) - **Engine (since 2021):** C3.3B DIT - **Engine Power (since 2019):** 74 (55.2) - **Engine type (since 2019):** Cat C3.3B DIT - **Full-Turn Tipping Load (since 2021):** 7061 lbs (3202.82 kg) - **Max Dump Height (since 2019):** 7.7 (2.4) - **Max Dump Height (since 2021):** 9.11 ft (2.78 m) - **Net Power (since 2021):** 74 hp (55.18 kw) - **Operating Weight (since 2019):** 12,331 (5,593) - **Operating Weight (since 2021):** 12252 lbs (5557.42 kg) - **Rated Bucket Capacity (since 2021):** 2.Jan cu yd - **Tip Load (since 2021):** 7,507 (3,405) - **Travel Speed(Fwd/Rev) (since 2021):** 6 / 6 mph ### Hydraulic System - **Hydraulic Cycle Time - Dump:** 1.3 seconds - **Hydraulic Cycle Time - Lift:** 5.2 seconds - **Hydraulic Cycle Time - Lower:** 3.2 seconds - **Hydraulic Cycle Time - Rackback:** 2.1 seconds - **Main Relief - 3rd Aux Flow:** 3400 psi - **Main Relief - 3rd Aux Flow: High Flow:** 31 gpm (117.34 lpm) - **Main Relief - 3rd Aux Flow: Standard:** 20 gpm (75.7 lpm) ### Loader Hydraulic System - **3rd Function Maximum Working Pressure:** 3408 psi - **Boost Flow Maximum Pressure:** 3191 psi - **Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height:** 3 seconds - **Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level:** 2.6 seconds - **Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift:** 9.6 seconds - **Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height:** 1.5 seconds - **Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level:** 2.6 seconds - **Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift:** 5.5 seconds - **Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time:** 9.6 seconds - **Lift Cylinder, Double Acting - Bore Diameter:** 3 in (7.62 cm) - **Lift Cylinder, Double Acting - Rod Diameter:** 2 in (5.08 cm) - **Lift Cylinder, Double Acting - Stroke:** 27.4 in (69.6 cm) - **Maximum Flow - Implement Pump:** 19 gpm (71.92 lpm) - **Maximum Flow - Implement Pump - Auxiliary Function High Flow:** 31 gpm (117.34 lpm) - **Maximum Flow - Implement Pump - Auxiliary Function Standard Flow:** 19 gpm (71.92 lpm) - **Maximum Working Pressure - Implement Pump:** 3408 psi - **Relief Pressure - Tilt Cylinder Head:** 4496 psi - **Relief Pressure - Tilt Cylinder Rod:** 2756 psi - **Tilt Cylinder, Double Acting - Bore Diameter:** 3.5 in (8.89 cm) - **Tilt Cylinder, Double Acting - Rod Diameter:** 2.2 in (5.59 cm) - **Tilt Cylinder, Double Acting - Stroke:** 16.4 in (41.66 cm) ### Maximum Material Densities - General Purpose Bucket - **Bucket Width:** 74 in (187.96 cm) - **Dump Height:** 94 in (238.76 cm) - **Rated Capacity:** 1.2 cu yd (0.92 cu m) ### Maximum Material Densities - Light Material Bucket - **Bucket Width:** 82 in (208.28 cm) - **Dump Height:** 90 in (228.6 cm) - **Rated Capacity:** 1.6 cu yd (1.22 cu m) ### Maximum Material Densities - Multi Purpose Bucket - **Bucket Width:** 74 in (187.96 cm) - **Dump Height:** 97 in (246.38 cm) - **Rated Capacity:** 1 cu yd (0.76 cu m) ### Operating Specifications - **Clearance - Full Lift and 45 degrees Dump:** 8.3 ft (2.53 m) - **Full Turn Tipping Load:** 7507 lbs (3405.12 kg) - **Operating Weight:** 12346 lbs (5600.06 kg) - **Rated Bucket Capacity:** 1.2 cu yd (0.92 cu m) - **Reach - Full Lift and 45 degrees Dump:** 2.4 ft (0.73 m) - **Steering Articulation Angle - Each Direction:** 39 degrees - **Tipping Load - Full Turn - ISO 14397-1:** 7061 lbs (3202.82 kg) - **Tipping Load - Straight - ISO 14397-1:** 8666 lbs (3930.84 kg) ### Operating Specifications - ISO Coupler - **Breakout Force - Bucket:** 11689 lbs ft (15847.95 nm) - **Full Turn Static Tipping Load - Bucket:** 9970 lbs (4522.32 kg) - **Rack Back - Transport Position:** 52 degrees - **Rated Bucket Capacity:** 1.2 cu yd (0.92 cu m) - **Rated Operating Load at Full Turn - Bucket:** 3986 lbs (1808.02 kg) - **Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm \[20 in\] Load Center):** 4848 lbs (2199.02 kg) - **Straight Tipping Load - Bucket:** 9778 lbs (4435.23 kg) - **Tire Size:** 405/70 R18 ### Operating Specifications - SSL Coupler - **Breakout Force - Bucket:** 9442 lbs ft (12801.46 nm) - **Full Turn Static Tipping Load - Bucket:** 7507 lbs (3405.12 kg) - **Rack Back - Transport Position:** 52 degrees - **Rated Bucket Capacity:** 1.2 cu yd (0.92 cu m) - **Rated Operating Load at Full Turn - Bucket:** 3754 lbs (1702.79 kg) - **Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm \[20 in\] Load Center):** 4553 lbs (2065.21 kg) - **Straight Tipping Load - Bucket:** 9215 lbs (4179.86 kg) - **Tire Size:** 405/70 R18 ### Service Refill Capacities - **Cooling System:** 4.4 gal (16.65 l) - **Engine Crankcase:** 3 gal (11.36 l) - **Engine Oil:** 3 gal (11.36 l) - **Fuel Tank:** 13.7 gal (51.85 l) - **Hydraulic System:** 18.5 gal (70.02 l) - **Hydraulic Tank:** 12.2 gal (46.18 l) - **Transmission - Gear Box:** 2.2 gal (8.33 l) ### Steering System - **Maximum Steering Torque - 0 degrees (Straight Machine):** 37155 lbs ft (50374.75 nm) - **Maximum Steering Torque - 39 degrees (Full Turn):** 27747 lbs ft (37619.38 nm) - **Maximum Working Pressure - Steering Pump:** 3191 psi - **Nominal Flow - Steering Pump:** 12 gpm (45.42 lpm) - **Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm:** 3 seconds - **Steering Articulation Angle - Each Direction:** 39 degrees - **Steering Cylinder, Double Acting - Bore Diameter:** 3.1 in (7.87 cm) - **Steering Cylinder, Double Acting - Rod Diameter:** 1.4 in (3.56 cm) - **Steering Cylinder, Double Acting - Stroke:** 11.8 in (29.97 cm) ### Tires - **Note (1):** \*Standard tire. - **Note (2):** Other tire choices available contact your Cat dealer for details. - **Note (3):** In certain applications the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-) capabilities. - **Note (4):** Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - **Option (1):** 335/80 R18 XZSL Michelin - **Option (2):** 340/80 R18 AT-R Firestone - **Option (3):** 340/80 R18 XMCL Michelin - **Option (4):** 340/80 R18 TRI2 Nokian - **Option (5):** 340/80 R18 Bibload Michelin - **Option (6):** 405/70 R18 SPT9 Dunlop\* - **Option (7):** 12.5/80 R18 Flexport ### Travel Speeds - **High Speed:** 21.7 mph (34.92 kph) - **Speed 1:** 6.2 mph (9.98 kph) - **Speed 2:** 12.4 mph (19.96 kph) ### Weights - **Operating Weight:** 12346 lbs (5600.06 kg) ## About this model The Caterpillar 906M is a compact wheel loader designed for material handling, loading, and site support applications. It is part of Caterpillar's M Series wheel loader line and is commonly used in construction, landscaping, agriculture, municipal work, and industrial yards. The 906M features articulated steering, a compact frame, and a front loader configuration for maneuverability in confined spaces. Typical uses include loading aggregate, moving pallets, stockpile work, and general jobsite cleanup. As a wheel loader, the 906M is built for versatility, operator visibility, and efficient cycle times in small to medium-duty applications. ## Photos ![Caterpillar 906M](https://s3.amazonaws.com/equipment.ceg/noimage.jpg)