# 2005 Caterpillar 924G for Sale in Maltby, Gbr **URL:** ## Listing details - **Price:** Auction pricing - **Listing ID:** 88858931 - **Year:** 2005 - **Manufacturer:** Caterpillar - **Model:** 924G - **Category:** Wheel Loaders - **Type:** Small Wheel Loaders - **Hours:** 11224 - **Serial number:** CAT0924GKWMB00984 - **Location:** Maltby, Gbr - **Auction starts:** 2026-08-12 ## Description Enclosed Cab, Air Conditioner, Rear View Camera, Autoshift, Auxiliary Hydraulics, Hydraulic Coupler, 2560 mm Bucket, Auto Lube, 17.5R25 Tires Closing Time: 2026-08-12 10:10:40 AM ## Manufacturer specifications ### Axles - **Axle Oscillation:** 12 degrees ### Bucket - **Bucket Capacities:** 2 - 3 cu yd (2 - 2 cu m) - **Bucket Capacity - struck:** 2 cu yd (1.53 cu m) - **Bucket Width:** 8.4 ft (2.56 m) ### Cab - **FOPS:** SAE J231 JAN81 ISO 3449-1992 Level II - **ROPS:** SAE J1040 MAY94 ISO 3471-1994 ### Dimensions - **Bucket Pin Height - Maximum Lift:** 12.1 ft (3.69 m) - **Carry Height:** 1.2 ft (0.37 m) - **Centerline of Front Axle to Hitch:** 4.7 ft (1.43 m) - **Digging Depth:** 4 in (10.16 cm) - **Dump Angle at Maximum Lift:** 45 degrees - **Dump Clearance at Maximum Lift - 45 degrees:** 9.1 ft (2.77 m) - **Fork Tine Length:** 4 ft (1.22 m) - **Height - Center of Axle:** 2.1 ft (0.64 m) - **Height - Top of Hood:** 85.2 in (216.41 cm) - **Height - Top of ROPS/FOPS:** 10.5 ft (3.2 m) - **Hinge Pin - Max Height:** 12.4 ft (3.78 m) - **Length - Rear Axle to Bumper:** 6.4 ft (1.95 m) - **Length w/ Bucket on Ground:** 23.6 ft (7.19 m) - **Length with out Forks on Ground:** 25 ft (7.62 m) - **Length with Bucket on Ground:** 23.1 ft (7.04 m) - **Overall Height:** 15.7 ft (4.79 m) - **Overall Height - Bucket Raised:** 15.7 ft (4.79 m) - **Overall Length:** 23.1 ft (7.04 m) - **Rack Back Angle - Carry:** 48 degrees - **Rack Back Angle - Maximum Lift:** 58 degrees - **Reach at Maximum Lift and 45 degrees Dump:** 2.1 ft (0.64 m) - **Wheel Base:** 9.2 ft (2.8 m) - **Wheel Base Length:** 9.2 ft (2.8 m) - **Wheelbase:** 9.2 ft (2.8 m) - **Width - Over Tires:** 7.9 ft (2.41 m) - **Width Over Tires:** 7.8 ft (2.38 m) ### Engine - **Bore:** 4 in (10.16 cm) - **Power Measured @:** 2300 rpm - **Rated Net Power:** 129 hp (96.2 kw) - **Stroke:** 5 in (12.7 cm) ### Hydraulic System - **Relief Valve Setting:** 3756.5 psi ### Loader Hydraulic System - **Bore (1):** 4.3 in (10.92 cm) - **Bore (2):** 4.8 in (12.19 cm) - **Dump:** 1.1 seconds - **Lower, Empty, Float Down:** 2.7 seconds - **Pump Flow - Implement Pump:** 40.15 gpm (151.97 lpm) - **Raise:** 5.2 seconds - **Stroke (1):** 29.7 in (75.44 cm) - **Stroke (2):** 20.5 in (52.07 cm) - **Total:** 9 seconds ### Operating Specifications - **Alternator Supplied Amperage:** 80 amps - **Articulation Angle:** 40 degrees - **Breakout Force:** 21727 lbs (9855.21 kg) - **Cooling System Fluid Capacity:** 10.6 gal (40.12 l) - **Dump Clearance at Full Lift and 45 degrees Dump Angle:** 9.1 ft (2.77 m) - **Engine Oil Capacity:** 5.3 gal (20.06 l) - **Engine Oil Fluid Capacity:** 5.3 gal (20.06 l) - **Front Axle/Diff Fluid Capacity:** 5.6 gal (21.2 l) - **Front Diff Fluid Capacity:** 5.6 gal (21.2 l) - **Operating Voltage:** 24 volts - **Reach - Full Lift and 45 degrees Dump:** 2.1 ft (0.64 m) - **Rear Axle Oscillation:** 12 degrees - **Rear Axle/Diff Fluid Capacity:** 5.6 gal (21.2 l) - **Rear Diff Fluid Capacity:** 5.6 gal (21.2 l) - **Static Tipping Load - Full Turn:** 15163 lbs (6877.83 kg) - **Static Tipping Weight:** 17359.2 lbs (7874.01 kg) - **Transmission Fluid Capacity:** 6.1 gal (23.09 l) - **Turning Radius:** 16.7 ft (5.09 m) ### Service Refill Capacities - **Cooling System:** 10.9 gal (41.26 l) - **Crankcase:** 4.2 gal (15.9 l) - **Front:** 5.5 gal (20.82 l) - **Fuel Tank:** 59.4 gal (224.83 l) - **Hydraulic Tank:** 18.5 gal (70.02 l) - **Rear:** 5.5 gal (20.82 l) - **Transmission:** 6.1 gal (23.09 l) ### Steering System - **Maximum Working Pressure:** 3000 psi - **Minimum Turning Radius - Over Tires:** 200 in (508 cm) - **Steering Angle - Each Direction:** 40 degrees - **Steering Cylinder, Two, Bore:** 2.8 in (7.11 cm) ### Tires - **Size:** 17.5-25PR (L-2) - **Tread Width:** 6.2 ft (1.89 m) ### Transmission - **Max Speed - Reverse:** 13.5 mph (21.73 kph) - **Number of Forward Gears:** 4 - **Number of Reverse Gears:** 3 - **Transmission Type:** countershaft ### Weights - **Operating Weight:** 23920 lbs (10849.94 kg) ## About this model The Caterpillar 924G is a wheel loader designed for material handling, loading, stockpiling, and general construction applications. Part of Caterpillar's G-series lineup, the 924G features a front-mounted bucket, articulated steering, and a diesel powertrain suited for earthmoving and aggregate work. It is commonly used in construction, quarry, landscaping, and industrial yard operations. The machine is known for balanced performance, operator visibility, and compatibility with a range of attachments. As a mid-size wheel loader, the Caterpillar 924G is used for moving loose material efficiently across job sites, making it a practical choice for loading trucks, feeding hoppers, and site cleanup tasks. ## Photos ![2005 Caterpillar 924G](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/21979/485/445a4205-7023-49e0-9272-f22bd0953cda-hr.jpg) ![2005 Caterpillar 924G photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/21979/485/7f9861f4-879c-4b94-bc8e-19914c966f91-hr.jpg) ![2005 Caterpillar 924G photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/21979/485/bd86abea-e828-4edf-8c70-f94656805cc3-hr.jpg) ![2005 Caterpillar 924G photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/21979/485/e0a9c0c1-405c-4ad8-9967-2f541eb5157b-hr.jpg) ![2005 Caterpillar 924G photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/21979/485/029c1962-0197-40ce-acfa-73ff048d66bc-hr.jpg) ![2005 Caterpillar 924G photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/21979/485/bf8c14b0-c05f-4040-9e7c-2a19740c43bc-hr.jpg) ![2005 Caterpillar 924G photo 7](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/21979/485/eb6f1524-e4fb-46d9-a2c8-e85fde7c1188-hr.jpg)