# 2018 Caterpillar 924K for Sale in Edmonton, Ab **URL:** ## Listing details - **Price:** Auction pricing - **Listing ID:** 89091569 - **Year:** 2018 - **Manufacturer:** Caterpillar - **Model:** 924K - **Category:** Wheel Loaders - **Type:** Small Wheel Loaders - **Hours:** 3956 - **Serial number:** CAT0924KCSNZ00788 - **Location:** Edmonton, Ab - **Auction starts:** 2026-09-22 ## Description Enclosed Cab, Air Conditioner, Rear View Camera, Air Ride Seat, Ride Control, Autoshift, Engine Coolant Heater, Positive Air Shutoff, Auxiliary Hydraulics, Hydraulic Coupler, 100 in Bucket, 20.5R25 Tires Located at 55050 Township Road 35-4, Caroline AB T0M0M0 - Contact Thomas Neal @403-844-0258, - Removal date October 9, 2026 - Buyer responsible to loadout, - Major Realignment for Raven Rentals (2022) Inc Closing Time: 2026-09-22 09:40:30 AM ## Manufacturer specifications ### Buckets - **Bucket Capacities:** 1.9 m3 - 5.0 m3 2.5 yd3 - 6.5 yd3 ### Cab - **Fops:** SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II - **Rops:** SAE J1040 MAY94, ISO 3471-1994 ### Dimensions - **Bucket Pin Height - Maximum Lift:** 12.75 ft (3.89 m) - **Carry Height:** 1.5 ft (0.46 m) - **Centerline Of Front Axle To Hitch:** 4.91 ft (1.5 m) - **Digging Depth:** 3.8 in (9.65 cm) - **Dump Angle At Maximum Lift:** 50 degrees - **Dump Clearance At Maximum Lift - 45 Degrees:** 9.4 ft (2.87 m) - **Ground Clearance:** 1.25 ft (0.38 m) - **Height:** 12 ft (3.66 m) - **Height - Center Of Axle:** 2.21 ft (0.67 m) - **Height - Top Of Rops/Fops:** 10.9 ft (3.32 m) - **Length:** 24.4167 ft (7.44 m) - **Length - Rear Axle To Bumper:** 6.5 ft (1.98 m) - **Overall Height - Bucket Raised:** 16.61 ft (5.06 m) - **Overall Length:** 24.4 ft (7.44 m) - **Rack Back Angle - Carry:** 45 degrees - **Rack Back Angle - Maximum Lift:** 54 degrees - **Reach At Maximum Lift And 45 Degrees Dump:** 3.3 ft (1.01 m) - **Weight:** 28360 lbs (12863.9 kg) - **Wheel Base Length:** 9.81 ft (2.99 m) - **Width:** 8.3333 ft (2.54 m) - **Width - Over Tires:** 8.33 ft (2.54 m) ### Engine - **Bore:** 4 in (10.16 cm) - **Displacement:** 402 cu in (6587.61 cu cm) - **Eec 80/1269:** 142 hp (105.89 kw) - **Iso 9249 (1997):** 142 hp (105.89 kw) - **Net Torque:** 515 lbs ft (698.24 nm) - **Rated Net Power:** 141 hp (105.15 kw) - **Sae J1349:** 141 hp (105.15 kw) - **Stroke:** 5 in (12.7 cm) ### Loader Hydraulic System - **Bore (1):** 4.3 in (10.92 cm) - **Bore (2):** 5.1 in (12.95 cm) - **Dump:** 1.5 s - **Hydraulic Cycle Time:** 9.6 s - **Lower, Empty, Float Down:** 2.6 s - **Maximum Working Pressure:** 3771 psi - **Pump Flow - Implement Pump:** 40 gpm (151.4 lpm) - **Raise:** 5.5 s - **Stroke (1):** 28.7 in (72.9 cm) - **Stroke (2):** 21.9 in (55.63 cm) - **Total:** 9.6 s ### Operating Specifications - **Articulation Angle:** 40 degrees - **Dump Clearance At Full Lift And 45 Degrees Dump Angle:** 9.4 ft (2.87 m) - **Reach - Full Lift And 45 Degrees Dump:** 3.3 ft (1.01 m) - **Static Tipping Load - Full Turn:** 16352 lbs (7417.15 kg) ### Operational - **Operating Weight:** 28360 lbs (12863.9 kg) ### Service Refill Capacities - **Cooling System:** 7.9 gal (29.9 l) - **Crankcase:** 5.3 gal (20.06 l) - **Front:** 5.5 gal (20.82 l) - **Fuel Tank:** 51.5 gal (194.93 l) - **Hydraulic System - Including Tank:** 42.3 gal (160.11 l) - **Hydraulic Tank:** 23.8 gal (90.08 l) - **Rear:** 5.5 gal (20.82 l) - **Transmission:** 2.2 gal (8.33 l) ### Steering - **Maximum Working Pressure:** 3500 psi - **Steering Angle - Each Direction:** 40 degrees - **Steering Articulation:** 40 degrees - **Steering Cylinder, Two, Bore:** 2.8 in (7.11 cm) ### Tires - **Size:** 20.5 R25 Radial (L-3) ### Transmission - **2:** 8 mph (12.87 kph) - **3:** 17 mph (27.36 kph) - **4:** 25 mph (40.23 kph) - **Forward - 1:** 8 mph (12.87 kph) - **Reverse - 1:** 8 mph (12.87 kph) - **Standard Transmission Maximum Travel Speeds:** 25 mph (40.23 kph) ## About this model The Caterpillar 924K is a wheel loader designed for material handling, stockpiling, truck loading, and general construction applications. It is part of Caterpillar's K Series and is commonly used in aggregate yards, roadbuilding, waste handling, and industrial sites. The 924K features a hydrostatic drive system, articulated steering, and a Z-bar linkage for efficient bucket loading and breakout force. Typical configurations include a standard or high-lift arrangement, with a range of bucket and attachment options. The machine is built for operator visibility, service access, and compatibility with multiple work tools. The Caterpillar 924K is a mid-size wheel loader used across construction and material handling sectors. ## Photos ![2018 Caterpillar 924K](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22827/451/765bb558-9ae6-4707-945d-1026c3e7339a-hr.jpg) ![2018 Caterpillar 924K photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22827/451/8b76e940-0420-3a7a-9b45-c27e63130be5-hr.jpg) ![2018 Caterpillar 924K photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22827/451/b1f716a1-0907-35a1-b344-f61e105e0d90-hr.jpg) ![2018 Caterpillar 924K photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22827/451/756c68a1-cf7b-3966-8ec8-1250c9fde7bf-hr.jpg) ![2018 Caterpillar 924K photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22827/451/19d2097d-3ac9-3a36-8a33-8abfc57c32ee-hr.jpg) ![2018 Caterpillar 924K photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22827/451/57fd34f9-1de0-4b36-80ab-8d73d3f84331-hr.jpg) ![2018 Caterpillar 924K photo 7](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22827/451/5e42a5e4-e6f9-41d9-80ea-efc6d69d3013-hr.jpg)