# 2014 Caterpillar 938K for Sale in Lansing, MI **URL:** ## Listing details - **Price:** $129,900.00 USD - **Listing ID:** 88934992 - **Year:** 2014 - **Manufacturer:** Caterpillar - **Model:** 938K - **Category:** Wheel Loaders - **Type:** Small Wheel Loaders - **Hours:** 5056 - **Serial number:** SWL03227 - **Stock number:** H67859 - **Location:** Lansing, MI ## Description CATERPILLAR 938K ## Manufacturer specifications ### Bucket - **Bucket Capacities:** 6.5 cu yd (4.97 cu m) - **Dump Clearance at Max Raise:** 9.25 ft (2.82 m) ### Cab - **FOPS:** SAE J/ISO 3449 APR98 Level II ISO 3449 1992 Level II - **ROPS:** SAE J1040 MAY94 ISO 3471-1994 ### Dimensions - **Bucket Pin Height - Maximum Lift:** 13 ft (3.96 m) - **Carry Height:** 1.5 ft (0.46 m) - **Centerline of Front Axle to Hitch:** 5 ft (1.52 m) - **Digging Depth:** 3.9 in (9.91 cm) - **Dump Angle at Maximum Lift:** 49 degrees - **Dump Clearance at Maximum Lift - 45 degrees:** 9.3 ft (2.83 m) - **Height - Center of Axle:** 2.2 ft (0.67 m) - **Height - Top of ROPS/FOPS:** 10.9 ft (3.32 m) - **Length - Rear Axle to Bumper:** 6.4 ft (1.95 m) - **Overall Height - Bucket Raised:** 17.3 ft (5.27 m) - **Overall Length:** 25.1 ft (7.65 m) - **Rack Back Angle - Carry:** 45 degrees - **Rack Back Angle - Maximum Lift:** 54 degrees - **Reach at Maximum Lift and 45 degrees Dump:** 3.8 ft (1.16 m) - **Wheel Base:** 10 ft (3.05 m) - **Wheel Base Length:** 10 ft (3.05 m) ### Engine - **Bore:** 4 in (10.16 cm) - **Displacement:** 402 cu in (6587.61 cu cm) - **EEC 80/1269:** 170 hp (126.77 kw) - **Engine Model:** C7.1 ACERT - **Gross Power:** 175 hp (130.5 kw) - **Net Power:** 169 hp (126.03 kw) - **Net Torque:** 591 lbs ft (801.28 nm) - **Number of Cylinders:** 6 - **Rated Net Power:** 169 hp (126.03 kw) - **Stroke:** 5 in (12.7 cm) - **Torque Measured @:** 1600 rpm ### Hydraulic System - **Dump Time:** 1.5 seconds - **Lower Time:** 2.7 seconds - **Pump Flow Capacity:** 50 gpm (189.25 lpm) - **Raise Time:** 6.2 seconds - **Relief Valve Setting:** 4061 psi ### Loader Hydraulic System - **Bore (1):** 4.7 in (11.94 cm) - **Bore (2):** 5.9 in (14.99 cm) - **Dump:** 1.5 seconds - **Hydraulic Cycle Time:** 9.7 seconds - **Lower, Empty, Float Down:** 2.7 seconds - **Pump Flow - Implement Pump:** 50 gpm (189.25 lpm) - **Raise:** 5.5 seconds - **Stroke (1):** 31.1 in (78.99 cm) - **Stroke (2):** 21.9 in (55.63 cm) - **Total:** 9.7 seconds ### Operating Specifications - **Articulation Angle:** 40 degrees - **Cooling System Fluid Capacity:** 8.5 gal (32.17 l) - **Dump Clearance at Full Lift and 45 degrees Dump Angle:** 9.3 ft (2.83 m) - **Front Axle/Diff Fluid Capacity:** 9.2 gal (34.82 l) - **Fuel Capacity:** 51.5 gal (194.93 l) - **Hydraulic System Fluid Capacity:** 23.8 gal (90.08 l) - **Operating Weight:** 34129 lbs (15480.67 kg) - **Rated Bucket Capacity:** 3 - 7 cu yd (3 - 5 cu m) - **Reach - Full Lift and 45 degrees Dump:** 3.8 ft (1.16 m) - **Rear Axle/Diff Fluid Capacity:** 9.2 gal (34.82 l) - **Static Tipping Load - Full Turn:** 20997 lbs (9524.09 kg) - **Tire Size:** 20.5 - **Transmission Fluid Capacity:** 2.9 gal (10.98 l) ### Service Refill Capacities - **Cooling System:** 7.9 gal (29.9 l) - **Crankcase:** 5.3 gal (20.06 l) - **Front:** 9.2 gal (34.82 l) - **Fuel Tank:** 51.5 gal (194.93 l) - **Hydraulic Tank:** 23.8 gal (90.08 l) - **Rear:** 9.2 gal (34.82 l) - **Transmission:** 2.9 gal (10.98 l) ### Steering System - **Maximum Working Pressure:** 3500 psi - **Steering Angle - Each Direction:** 40 degrees - **Steering Articulation:** 40 degrees - **Steering Cylinder, Two, Bore:** 3.1 in (7.87 cm) ### Tires - **Size:** 20.5 R25 radial (L-3) ### Transmission - **2 Forward:** 8 mph (12.87 kph) - **3 Forward:** 17 mph (27.36 kph) - **4 Forward:** 25 mph (40.23 kph) - **Forward - 1:** 8 mph (12.87 kph) - **Max Speed - Forward:** 25 mph (40.23 kph) - **Max Speed - Reverse:** 25 mph (40.23 kph) - **Number of Forward Gears:** 4 - **Number of Reverse Gears:** 4 - **Reverse - 1:** 8 mph (12.87 kph) ### Weights - **Operating Weight:** 35104 lbs (15922.93 kg) - **Operational Weight:** 35104 lbs (15922.93 kg) ## About this model The Caterpillar 938K is a wheel loader designed for material handling, stockpiling, truck loading, and general construction applications. It is part of Caterpillar's K Series and is commonly used in aggregate yards, industrial sites, waste handling, and roadwork support. The 938K features a hydrostatic transmission, articulated steering, and a front-end loader configuration for efficient loading and maneuverability. It is typically equipped with a Caterpillar diesel engine, operator cab, and compatibility with a range of buckets and work tools. The 938K is used in applications requiring lifting, carrying, and loading bulk materials across varied jobsite conditions. ## Photos ![2014 Caterpillar 938K](https://www.aisequip.com/wp-content/uploads/2001-H67859-Mobile52490428.jpg) ![2014 Caterpillar 938K photo 2](https://www.aisequip.com/wp-content/uploads/2001-H67859-Mobile70023627.jpg) ![2014 Caterpillar 938K photo 3](https://www.aisequip.com/wp-content/uploads/2001-H67859-Mobile76396595.jpg) ![2014 Caterpillar 938K photo 4](https://www.aisequip.com/wp-content/uploads/2001-H67859-Mobile74251167.jpg) ![2014 Caterpillar 938K photo 5](https://www.aisequip.com/wp-content/uploads/2001-H67859-Mobile34153152.jpg) ![2014 Caterpillar 938K photo 6](https://www.aisequip.com/wp-content/uploads/2001-H67859-Mobile32563617.jpg) ![2014 Caterpillar 938K photo 7](https://www.aisequip.com/wp-content/uploads/2001-H67859-Mobile49104257.jpg)