2005 John Deere 672D For Sale in Chesapeake, VA



For Sale: $89,500.00 USD


Southeastern Equipment Corporation

https://www.secva.net
Click for Phone Number

Machine Info:

Hours:4081
Serial Number:597142
Stock Number:08-7517
Machine Location:CHESAPEAKE, VA 23320

Description:

Enclosed cab with heat and air conditioning, 6 wheel drive, articulated motor grader equipped with a 3 shank rear ripper scarifier combination, front push block, 12' moldboard with hydraulic tip and slide, matching 14:00 Michelin radial tires at 70% remaining, 8 speed powershift transmission. No cracks or repair welds on frame. Very clean inside the cab with all controls functioning properly, all glass in tact. no leaks. Low hour grader in good repair with no known issues.
Express Financing

Machine Details:

Condition
Used
GaUGES, OPERATOR STATION, CONSOLE
heaterYes
ripper
ripperYes


Specs from the manufacturer:

Circle
Blade Tip Angle - Front42 °
Blade Tip Angle - Rear5 °
Diameter60 in (152 cm)
Max Lift Above Ground19 in (47 cm)
Max Reach Outside Tires - Left83 in (210 cm)
Max Reach Outside Tires - Right82 in (208 cm)
Rotation360 °
Shift Left31 in (79 cm)
Shift Right29 in (73 cm)
Dimensions
Blade Base9 ft (3 m)
Front Ground Clearance2 ft (1 m)
Height to Top of Isomount Cab11 ft (3 m)
Overall Length29 ft (9 m)
Tandem Axle Wheelbase5 ft (2 m)
Wheelbase20 ft (6 m)
Width Over Tires8 ft (3 m)
Engine
Aspirationturbocharged with air-to-air aftercooler
Displacement414 cu in (0 m)
Engine Model6068H
Max Power185 hp (138 kw)
Net Power Gear 1-2165 hp (123 kw)
Net Power Gear 4-6165 hp (123 kw)
Net Power Gear 5-6185 hp (138 kw)
Net Power Gears 7-8185 hp (138 kw)
Net Torque Gears 1-2554 lbs/ft
Net Torque Gears 3-4611 lbs/ft
Net Torque Gears 5-6625 lbs/ft
Net Torque Gears 7-8625 lbs/ft
Number of Cylinders6
Power Measured @2,000 rpm
Torque Measured @1,000 rpm
Front Axle
Ground Clearance2 ft (1 m)
Oscillation - Total32 °
Wheel Lean20 °
Hydraulic System
Pump Flow55 gal/min (207 l/min)
Pump TypeVariable-displacement Piston
Relief Valve Pressure2,750 psi
Moldboard
Blade Pull at Max Weight42,120 lbs (19,106 kg)
Moldboard Height24 in (61 cm)
Moldboard Thickness1 in (2 cm)
Moldboard Width12 ft (4 m)
Side Shift Left27 in (68 cm)
Side Shift Right27 in (68 cm)
Operating Specifications
Alternator Supplied Amperage100 A
Circle Gearbox Fluid Capacity2 gal (6 l)
Cooling System Fluid Capacity12 gal (45 l)
Fuel Capacity106 gal (401 l)
Hydraulic System Fluid Capacity14 gal (53 l)
Max Operation Weight - Total46,800 lbs (21,228 kg)
Operating Voltage24 V V
Rear Diff/Final Drive Fluid Capacity10 gal (36 l)
Std Operation Weight - Front Axle9,610 lbs (4,359 kg)
Std Operation Weight - Rear Axle24,020 lbs (10,895 kg)
Std Operation Weight - Total33,630 lbs (15,255 kg)
Tandem Case Fluid Capacity (each)20 gal (76 l)
Tire Size14.00R24 Radial PR
Transmission Fluid Capacity6 gal (23 l)
Steering System
Articulation Angle22 °
Turning Radius24 ft (7 m)
Transmission
Max Speed - Forward25 mph (40 kph)
Max Speed - Reverse25 mph (40 kph)
Number of Gears - Forward8
Number of Gears - Reverse8
Transmission TypePowershift with direct drive

Dealer Contact Info:

Southeastern Equipment Corporation


Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo