This machine has been sold.

1998 John Deere 770CH



MACHINE SOLD

This machine is available to rent.

Daily$600
Weekly$2000
Monthly$6000

Hull's 151 Implement

https://www.hulls151.com


Contact: Les Hull

Click for Phone Number

Machine Info:

Hours:6518
Stock Number:71201
Machine Location:WAUPUN WI, 53963

Description:

CAB, A/C, LOW ORIGNAL MUNICIPLE HOURS, 14' MULBOARD W/NEW H.D. 8" CUTTING EDGE, BALDERSON FRONT LIFT GROUP, 14:00R24 SNOW RADIALS@60%, . NEW REMAN. TRANSMISSION INSTALLED AT 6459 HOURS!! FRONT FENDERS, PLUMBED AND FACTORY CONTROLS FOR A SNOW WING! SNOW WINGS ON HAND! WE WILL INSTALL A NICE FALLS SNOW WING FOR $4000. VERY CLEAN ORIGINAL WELL KEPT TOWNSHIP MACHINE! RUNS OUT PERFECTLY!
33,000LB OPERATING WT., JD 6081 ENG @205HP.


Machine Details:

Condition
Used


Specs from the manufacturer:

Circle
Blade Tip Angle - Front49 °
Blade Tip Angle - Rear5 °
Diameter60 in (152 cm)
Max Lift Above Ground19 in (47 cm)
Max Reach Outside Tires - Left85 in (216 cm)
Max Reach Outside Tires - Right83 in (211 cm)
Rotation360 °
Shift Left31 in (79 cm)
Shift Right29 in (73 cm)
Dimensions
Blade Base9 ft (3 m)
Front Ground Clearance2 ft (1 m)
Height to Top of Isomount Cab10 ft (3 m)
Overall Length28 ft (9 m)
Tandem Axle Wheelbase5 ft (2 m)
Wheelbase20 ft (6 m)
Width Over Tires8 ft (3 m)
Engine
AspirationTurbocharged with Aftercooler
Displacement494 cu in (0 m)
Engine Model6081H
Max Power205 hp (153 kw)
Net Power Gear 1-2165 hp (123 kw)
Net Power Gear 4-6185 hp (138 kw)
Net Power Gear 5-6205 hp (153 kw)
Net Power Gears 7-8205 hp (153 kw)
Net Torque Gears 1-2570 lbs/ft
Net Torque Gears 3-4680 lbs/ft
Net Torque Gears 5-6682 lbs/ft
Net Torque Gears 7-8682 lbs/ft
Number of Cylinders6
Power Measured @1,900 rpm
Torque Measured @900 rpm
Front Axle
Ground Clearance2 ft (1 m)
Oscillation - Total32 °
Wheel Lean20 °
Hydraulic System
Pump Flow55 gal/min (207 l/min)
Pump TypeClosed Center Variable displacement
Relief Valve Pressure2,550 psi
Moldboard
Blade Pull at Max Weight27,990 lbs (12,696 kg)
Moldboard Height24 in (61 cm)
Moldboard Thickness1 in (2 cm)
Moldboard Width12 ft (4 m)
Side Shift Left27 in (68 cm)
Side Shift Right27 in (68 cm)
Operating Specifications
Alternator Supplied Amperage55 A
Circle Gearbox Fluid Capacity1 gal (4 l)
Cooling System Fluid Capacity12 gal (45 l)
Fuel Capacity106 gal (401 l)
Hydraulic System Fluid Capacity16 gal (59 l)
Max Operation Weight - Front Axle9,910 lbs (4,495 kg)
Max Operation Weight - Rear Axle26,320 lbs (11,939 kg)
Max Operation Weight - Total36,230 lbs (16,434 kg)
Oil System Fluid Capacity8 gal (29 l)
Operating Voltage24 V V
Rear Diff/Final Drive Fluid Capacity10 gal (36 l)
Std Operation Weight - Front Axle8,790 lbs (3,987 kg)
Std Operation Weight - Rear Axle22,710 lbs (10,301 kg)
Std Operation Weight - Total31,500 lbs (14,288 kg)
Tandem Case Fluid Capacity (each)20 gal (75 l)
Tire Size14.00-24
Transmission Fluid Capacity10 gal (38 l)
Steering System
Articulation Angle25 °
Turning Radius22 ft (7 m)
Transmission
Max Speed - Forward26 mph (42 kph)
Max Speed - Reverse26 mph (42 kph)
Number of Gears - Forward8
Number of Gears - Reverse8
Transmission TypePower Shift

Dealer Contact Info:

Hull's 151 Implement




Contact: Les Hull

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo