Equipment ↠ Volvo ↠ Motor Graders ↠ THIS 2002 Volvo G720B

2002 Volvo G720B

Name: 2002 Volvo G720B
Brand: Volvo
Price: 49500 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Machine Info:

Serial Number:	035294
Stock Number:	08-7762
Machine Location:	CHESAPEAKE, VA

Description:

Enclosed cab with heat and cold air conditioning, articulated frame, hydraulic wheel lean, 5 shank rear ripper, 14:00-24 tires in 60% + condition, hydraulic slide & hydraulic tip 12’ moldboard in good condition with good cutting edges. Low profile cab with a clean operators station. All gauges, controls, and switches functioning properly. “Cat” style controls. Powered by a Volvo 6 cylinder turbo charged Diesel engine coupled to a power shift transmission. Good brakes, tight steering and tight circle. All hydraulic cylinders are dry .No cracks or repair welds on frame or circle. Nice well maintained grader with no known issues.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front	44 deg
Blade Tip Angle - Rear	6.5 deg
Diameter	66.3 in ( 168 cm )
Max Lift Above Ground	17.5 in ( 44 cm )
Max Reach Outside Tires - Left	79.5 in ( 202 cm )
Max Reach Outside Tires - Right	79.0 in ( 201 cm )
Rotation	360 deg
Shift Left	30.5 in ( 77 cm )
Shift Right	29.5 in ( 75 cm )
Dimensions
Blade Base	8.6 ft ( 3 m )
Height to Top of Isomount Cab	10.2 ft ( 3 m )
Overall Length	30.0 ft ( 9 m )
Wheelbase	20.0 ft ( 6 m )
Width Over Tires	8.4 ft ( 3 m )
Engine
Aspiration	Turbocharged
Displacement	436.0 cu in ( 0 cu m )
Engine Model	D7DGBE2
Max Power	198.0 hp ( 148 kw )
Net Power Gears 7-8	198.0 hp ( 148 kw )
Net Torque Gears 7-8	701.0 lbs ft
Power Measured @	2,200.0 rpm
Torque Measured @	1,400.0 rpm
Front Axle
Ground Clearance	2.1 ft ( 1 m )
Oscillation - Total	16 deg
Wheel Lean	18 deg
Hydraulic System
Pump Flow	75.1 gpm ( 284 lpm )
Pump Type	load sensing hydraulic
Relief Valve Pressure	2,700.0 psi
Moldboard
Blade Down Pressure	17,148.0 lbs ( 7,778 kg )
Blade Pull at Max Weight	21,726.0 lbs ( 9,855 kg )
Max Depth of Cut	32.0 in ( 81 cm )
Moldboard Height	25.0 in ( 64 cm )
Moldboard Thickness	0.9 in ( 2 cm )
Moldboard Width	12.0 ft ( 4 m )
Side Shift Left	26.5 in ( 67 cm )
Side Shift Right	26.5 in ( 67 cm )
Operating Specifications
Alternator Supplied Amperage	80 amps
Cooling System Fluid Capacity	7.4 gal ( 28 l )
Fuel Capacity	100.0 gal ( 379 l )
Hydraulic System Fluid Capacity	35.4 gal ( 134 l )
Operating Voltage	24.0 volts
Rear Diff/Final Drive Fluid Capacity	6.1 gal ( 23 l )
Std Operation Weight - Front Axle	9,859.1 lbs ( 4,472 kg )
Std Operation Weight - Rear Axle	24,140.7 lbs ( 10,950 kg )
Std Operation Weight - Total	33,999.7 lbs ( 15,422 kg )
Tandem Case Fluid Capacity (each)	26.5 gal ( 100 l )
Tire Size	14.00 x 24 , G-2
Transmission Fluid Capacity	10.1 gal ( 38 l )
Steering System
Articulation Angle	22 deg
Transmission
Max Speed - Forward	28.5 mph ( 46 kph )
Max Speed - Reverse	20.4 mph ( 33 kph )
Number of Gears - Forward	8.0
Number of Gears - Reverse	4.0
Transmission Type	Powershift

Dealer Contact Info:

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon