| Circle |
| Blade Tip Angle - Front | 45 ° |
| Blade Tip Angle - Rear | 6 ° |
| Diameter | 64 in (163 cm) |
| Max Reach Outside Tires - Left | 80 in (203 cm) |
| Max Reach Outside Tires - Right | 79 in (201 cm) |
| Rotation | 360 ° |
| Shift Left | 31 in (77 cm) |
| Shift Right | 30 in (75 cm) |
| Dimensions |
| Blade Base | 9 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Overall Length | 30 ft (9 m) |
| Wheelbase | 21 ft (6 m) |
| Width Over Tires | 8 ft (3 m) |
| Engine |
| Aspiration | Turbocharged, Aftercooled |
| Displacement | 436 cu in (0 m) |
| Engine Model | D7E |
| Max Power | 225 hp (168 kw) |
| Net Power Gears 7-8 | 225 hp (168 kw) |
| Net Torque Gears 7-8 | 754 lbs/ft |
| Number of Cylinders | 6 |
| Power Measured @ | 1,800 rpm |
| Torque Measured @ | 1,500 rpm |
| Front Axle |
| Ground Clearance | 2 ft (1 m) |
| Oscillation - Total | 16 ° |
| Wheel Lean | 18 ° |
| Hydraulic System |
| Pump Flow | 55 gal/min (208 l/min) |
| Pump Type | Axial piston pump |
| Relief Valve Pressure | 3,000 psi |
| Moldboard |
| Blade Down Pressure | 19,035 lbs (8,634 kg) |
| Blade Pull at Max Weight | 36,760 lbs (16,674 kg) |
| Max Depth of Cut | 31 in (79 cm) |
| Moldboard Height | 25 in (64 cm) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 27 in (67 cm) |
| Side Shift Right | 27 in (67 cm) |
| Operating Specifications |
| Alternator Supplied Amperage | 80 A |
| Cooling System Fluid Capacity | 9 gal (34 l) |
| Fuel Capacity | 107 gal (405 l) |
| Hydraulic System Fluid Capacity | 38 gal (144 l) |
| Max Operation Weight - Front Axle | 16,700 lbs (7,575 kg) |
| Max Operation Weight - Rear Axle | 31,400 lbs (14,243 kg) |
| Max Operation Weight - Total | 48,000 lbs (21,773 kg) |
| Oil System Fluid Capacity | 6 gal (22 l) |
| Operating Voltage | 24 V V |
| Std Operation Weight - Front Axle | 11,020 lbs (4,999 kg) |
| Std Operation Weight - Rear Axle | 27,120 lbs (12,302 kg) |
| Std Operation Weight - Total | 38,140 lbs (17,300 kg) |
| Tandem Case Fluid Capacity (each) | 26 gal (100 l) |
| Tire Size | 14:00 x 24, G-2 |
| Transmission Fluid Capacity | 16 gal (61 l) |
| Steering System |
| Articulation Angle | 23 ° |
| Turning Radius | 24 ft (7 m) |
| Transmission |
| Max Speed - Forward | 28 mph (46 kph) |
| Max Speed - Reverse | 20 mph (32 kph) |
| Number of Gears - Forward | 8 |
| Number of Gears - Reverse | 4 |
| Transmission Type | HTE 840, Fully sequential, direct drive, Volvo powershift transmission |
Equipment
Search
News
Auctions
