Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
For Sale: Call for Price
Hours: | 3222 |
Stock Number: | 10106188 |
Machine Location: | CHARLOTTE, NC |
Axles | |
Axle oil front | 9.3 gal ( 35.2 l ) |
Axle oil rear | 7.2 gal ( 27.25 l ) |
Front | Volvo AWB 25 |
Rear | Volvo AWB 20 |
Rear axle oscillation | 13 deg |
Bucket | |
Breakout Force | 19,738.3 lbs ( 8953.23 kg ) |
Dump Clearance at Max Raise | 9.2 ft ( 2.8 m ) |
Dimensions | |
Ground Clearance | 1.6 ft ( 0.49 m ) |
Height - Top of Cab | 10.8 ft ( 3.29 m ) |
Hinge Pin - Max Height | 12.7 ft ( 3.87 m ) |
Length with Bucket on Ground | 24.7 ft ( 7.53 m ) |
Wheelbase | 9.9 ft ( 3.02 m ) |
Width Over Tires | 8.1 ft ( 2.47 m ) |
Drive System | |
Torque multiplication, stall ratio | 2.5:1 Non Lock-up / 2.59:1 Lock-up |
Transmission | Volvo HTE 125C Non Lock-up / HTE 125 Lock-up |
Transport speed, maximum | 31.1 mph ( 50.04 kph ) |
Electrical System | |
Alternator rating | 3135/80 (W/A) |
Battery capacity | 2 x 110 Ah |
Cold cranking capacity | 1000 A |
Starter motor output | 7.4 hp ( 5.52 kw ) |
Voltage | 24 V |
Engine | |
Aspiration | Turbocharged |
Displacement | 347.9 cu in ( 0.01 cu m ) |
Engine Model | Volvo D6J |
Gross Power | 170.0 hp ( 126.77 kw ) |
Model | D6J |
Net Power | 170.0 hp ( 126.77 kw ) |
Number of Cylinders | 6.0 |
Power Measured @ | 1,800.0 rpm |
Torque Measured @ | 1,400.0 rpm |
Hydraulic cycle times (unloaded) | |
Lift | 5.1 seconds |
Lower | 2.7 seconds |
Tilt | 1.3 seconds |
Total cycle time | 9.1 seconds |
Hydraulic System | |
Engine speed | 1,900.0 rpm |
Working pressure | Pump 2 - 26 MPa, Pump 3 - 21 MPa |
Operating Specifications | |
Cooling System Fluid Capacity | 8.0 gal ( 30.28 l ) |
DEF tank capacity | 5.3 gal ( 20.06 l ) |
Engine Oil Fluid Capacity | 5.3 gal ( 20.06 l ) |
Fuel Capacity | 58.7 gal ( 222.18 l ) |
Hydraulic System Fluid Capacity | 23.8 gal ( 90.08 l ) |
Rated Bucket Capacity | 2 - 8 cu yd ( 2 - 6 cu m ) |
Transmission Fluid Capacity | 5.9 gal ( 22.33 l ) |
Steering System | |
Articulation angle | 40 deg |
Cylinder bore | 2.8 in ( 7.11 cm ) |
Maximum flow | 15.9 gpm ( 60.18 lpm ) |
Rod diameter | 1.8 in ( 4.57 cm ) |
Steering cylinders | 2.0 |
Stroke | 1.3 ft ( 0.4 m ) |
Working pressure | 21 MPa, 210 bar |
Weights | |
Operational Weight | 29,200.0 lbs ( 13245.03 kg ) |