# 2017 Volvo L180H for Sale in Chilliwack, Bc

**URL:** <https://www.constructionequipmentguide.com/used-equipment/volvo/wheel-loaders/l180h/id/89192350>

## Listing details

- **Price:** Auction pricing
- **Listing ID:** 89192350
- **Year:** 2017
- **Manufacturer:** Volvo
- **Model:** L180H
- **Category:** Wheel Loaders
- **Serial number:** VCEL180HJ00004471
- **Location:** Chilliwack, Bc
- **Auction starts:** 2026-10-22

## Manufacturer specifications

### Axles

- **Axle Oil Front:** 12.2 gal (46.18 l)
- **Axle Oil Rear:** 14.6 gal (55.26 l)
- **Front:** Volvo AWB 40B
- **Rear:** Volvo AWB 40B
- **Rear Axle Oscillation:** 13 degrees
- **Rear Axle Oscillation:** 15 degrees

### Bucket

- **Breakout Force:** 53077.39 lbs (24075.53 kg)

### Dimensions

- **Ground Clearance:** 2.01 ft (0.61 m)
- **Height:** 11.75 ft (3.58 m)
- **Height To Top Of Cab:** 16.93 ft (5.16 m)
- **Height To Top Of Cab:** 11.75 ft (3.58 m)
- **Hinge Pin - Max Height:** 29.3 ft (8.93 m)
- **Hinge Pin - Max Height:** 14.67 ft (4.47 m)
- **Length:** 30.5833 ft (9.32 m)
- **Length With Bucket On Ground:** 31.5 ft (9.6 m)
- **Length With Bucket On Ground:** 29.7 ft (9.05 m)
- **Weight:** 62766 lbs (28470.21 kg)
- **Wheelbase:** 1.58 ft (0.48 m)
- **Width:** 9.75 ft (2.97 m)
- **Width Over Tires:** 10.11 ft (3.08 m)
- **Width Over Tires:** 9.72 ft (2.96 m)

### Drive Train

- **Torque Multiplication, Stall Ratio:** 2.09:1
- **Transmission:** Volvo HTL 223
- **Transport Speed, Maximum:** 23.6 mph (37.98 kph)

### Electrical System

- **Alternator Rating:** 2280/80 (W/A)
- **Batteries:** 2 x 12 V
- **Battery Capacity:** 2 x 170 Ah
- **Cold Cranking Capacity:** 1000 A
- **Starter Motor Output:** 9.4 hp (7.01 kw)
- **Voltage:** 24 V V

### Engine

- **Aspiration:** Turbocharged
- **Displacement:** 781.2 cu in (12801.6 cu cm)
- **Engine Model:** Volvo D13J
- **Gross Power:** 329.9 hp (246.01 kw)
- **Max Torque:** Gross - 2030 Nm, Net - 2024 Nm
- **Net Power:** 328.6 hp (245.04 kw)
- **Number Of Cylinders:** 6
- **Power Measured @:** 1400 rpm
- **Torque Measured @:** 1000 rpm

### General Specifications

- **Bucket Capacity (since 2016):** 3.5 - 12.4 (2.7 - 9.5)
- **Bucket Capacity (since 2017):** 5.5 - 20.9 (4.2 - 15.9)
- **Bucket Capacity (since 2020):** 12.9 (9.9)
- **Bucket Capacity (since 2022):** 7.2 (5.5)
- **Engine Power (since 2016):** 333 (248)
- **Engine Power (since 2017):** 329 (245)
- **Engine type (since 2016):** D13J
- **Engine type (since 2019):** Volvo D13J
- **Engine type (since 2020):** Volvo D13J (Tier 4F)
- **Max Dump Height (since 2016):** 10 (3)
- **Max Dump Height (since 2017):** 10 (3.0)
- **Max Dump Height (since 2022):** 9.9 (2.9)
- **Operating Weight (since 2016):** 61,890 (28,073)
- **Operating Weight (since 2019):** 59,525 - 62,610 (27,000 - 28,399)
- **Operating Weight (since 2020):** 62,150 (28,190)
- **Operating Weight (since 2022):** 62,390 (28,300)

### Hydraulic Cycle Times (Unloaded)

- **Lift:** 6.4 sec
- **Lower:** 3.3 sec
- **Tilt:** 1.8 sec
- **Total Cycle Time:** 11.5 sec

### Hydraulic System

- **Engine Speed:** 1900 rpm
- **Working Pressure:** Pump 1 - 20 MPa, Pump 2 - 21 MPa
- **Working Pressure:** Pump 1 - 29 MPa, Pump 2 - 31 MPa, Pump 3 - 25 MPa

### Operational

- **Cooling System Fluid Capacity:** 14.6 gal (55.26 l)
- **Def Tank Capacity:** 8.2 gal (31.04 l)
- **Engine Oil Fluid Capacity:** 13.3 gal (50.34 l)
- **Fuel Capacity:** 96.7 gal (366.01 l)
- **Hydraulic System Fluid Capacity:** 41.3 gal (156.32 l)
- **Transmission Fluid Capacity:** 12.7 gal (48.07 l)

### Steering System

- **Articulation Angle:** 37 degrees
- **Cylinder Bore:** 4 in (10.16 cm)
- **Maximum Flow:** 66.6 gpm (252.08 lpm)
- **Maximum Flow:** 53.4 gpm (202.12 lpm)
- **Rod Diameter:** 2.4 in (6.1 cm)
- **Steering Cylinders:** 2
- **Stroke:** 1.8 ft (0.55 m)
- **Working Pressure:** 21 MPa, 210 bar

## About this model

The Volvo L180H is a large wheel loader designed for heavy-duty material handling in construction, quarry, aggregate, and industrial applications. It is part of Volvo Construction Equipment's H-series and is commonly used for loading trucks, stockpiling, and moving bulk materials. The L180H features a fuel-efficient Volvo engine, load-sensing hydraulics, and a reinforced loader linkage for demanding cycles. Operator comfort, visibility, and service access are key design elements. With high breakout force, strong lifting performance, and compatibility with a range of buckets and attachments, the Volvo L180H is suited to high-production loading tasks in rugged operating environments.

## Photos

![2017 Volvo L180H](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22812/914/0731b00d-4f9a-45e9-8995-90a9a1bce4c4-hr.jpg)

![2017 Volvo L180H photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22812/914/b4c0b7a0-3ae7-4e1c-b2f5-2546753acfca-hr.jpg)