All Equipment Category Specs ↠ Compact Track Loaders ↠ Caterpillar 297D2

Caterpillar 297D2 Compact Track Loader

Category: Compact Track Loaders (See all Compact Track Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 297D2 (See all Caterpillar 297D2 for sale)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Cab

FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II
ROPS	ISO 3471:2008

Dimensions

Bucket Pin Height - Carry Position	8 in (20 cm)
Bucket Pin Height - Maximum Lift	11 ft (3 m)
Bucket Pin Reach - Maximum Lift	15 in (39 cm)
Clearance at Maximum Lift and Dump	96 in (245 cm)
Departure Angle	30 degrees
Ground Clearance	1 ft (0 m)
Height - Top of Cab	7 ft (2 m)
Length - Track on Ground	71 in (181 cm)
Length - With Bucket on Ground	155 in (394 cm)
Length - Without Bucket	126 in (320 cm)
Maximum Dump Angle	52 degrees
Maximum Overall Height	161 in (408 cm)
Maximum Reach - With Arms Parallel to Ground	50 in (126 cm)
Overall Length - Track	90 in (229 cm)
Rack Back Angle - Maximum Height	83 degrees
Reach - Maximum Lift/Dump	31 in (77 cm)
Roll Back Angle	27 degrees
Turning Radius from Center - Bucket (racked)	92 in (233 cm)
Turning Radius from Center - Coupler	59 in (150 cm)
Turning Radius from Center - Machine Rear	73 in (186 cm)
Vehicle Width	78 in (198 cm)

Engine

Bore	4 in (10 cm)
Displacement	232 cu in (3,802 cu cm)
Engine Model	Cat C3.8 DIT (turbo)
Gross Power	95 hp (71 kw)
Gross Power - SAE J1995	98 hp (73 kw)
Net Power	95 hp (71 kw)
Net Power - ISO 9249	95 hp (71 kw)
Net Power - SAE 1349	95 hp (71 kw)
Peak Torque - 1,500 rpm - SAE J1995	246 ft (75 m)
Stroke	5 in (12 cm)

Hydraulic System

Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	76 hp (57 kw)
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	32 gpm (121 lpm)
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44 hp (33 kw)
Hydraulic Flow - Standard - Loader Hydraulic Flow	23 gpm (87 lpm)
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi

Loader

Operating Load Rating	4,700 lbs (2,132 kg)
Operating Width	76 in (193 cm)

Noise Level

Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	104 dB(A)

Operating Specifications

Breakout Force - Lift Cylinder	6,072 lbs (2,754 kg)
Breakout Force - Tilt Cylinder	7,468 lbs (3,387 kg)
Ground Contact Area	2,561 cu in (41,967 cu cm)
Ground Pressure	4.2 psi
Rated Operating Capacities - 35% Tipping Load	3,290 lbs (1,492 kg)
Rated Operating Capacities - 50% Tipping Load	4,700 lbs (2,132 kg)
Rated Operating Capacity with Optional Counterweight	4,960 lbs (2,250 kg)
Tipping Load	9,400 lbs (4,264 kg)

Power Train

Travel Speed - Forward or Reverse - One Speed	6 mph (9 kph)
Travel Speed - Forward or Reverse - Two Speed	9 mph (15 kph)

Service Refill Capacities

Cooling System	4 gal (16 l)
Diesel Exhaust Fluid (DEF) Tank	5 gal (19 l)
Engine Crankcase	4 gal (13 l)
Fuel Tank	32 gal (122 l)
Hydraulic System	15 gal (55 l)
Hydraulic Tank	10 gal (39 l)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon