All Equipment Category Specs ↠ Compact Track Loaders ↠ Volvo MCT125C

Volvo MCT125C Compact Track Loader

Category: Compact Track Loaders (See all Compact Track Loaders for sale)
Manufacturer: Volvo (See all Volvo Equipment for sale)
Model: MCT125C (See all Volvo MCT125C for sale)

Bucket

Breakout force, curl	7,187 lbs (3,260 kg)
Breakout force, lift	5,807 lbs (2,634 kg)
General Purpose Bucket Heaped	1 cu yd (1 cu m)
General Purpose Bucket Height	2 ft (1 m)
General Purpose Bucket Length	3 ft (1 m)
General Purpose Bucket Weight	542 lbs (246 kg)
General Purpose Bucket Width	7 ft (2 m)
Landscape Bucket Heaped cap	1 cu yd (1 cu m)
Landscape Bucket Height	2 ft (1 m)
Landscape Bucket Length	3 ft (1 m)
Landscape Bucket Weight	1 cu in (8 cu cm)
Landscape Bucket Width	7 ft (2 m)
Multi Purpose Bucket Heaped cap	1 cu yd (1 cu m)
Multi Purpose Bucket Height	2 ft (1 m)
Multi Purpose Bucket Length	3 ft (1 m)
Multi Purpose Bucket Weight	842 lbs (382 kg)
Multi Purpose Bucket Width	7 ft (2 m)

Capacities

Cooling system	4 gal (16 l)
Engine oil w/ filter change	4 gal (15 l)
Fuel Tank	27 gal (103 l)
Hydraulic oil reservoir	7 gal (26 l)
Hydraulic system	16 gal (60 l)
Tipping Load	7,990 lbs (3,624 kg)

Dimensions

Angle of departure	28.7 degrees
Attachment roll back angle	30 degrees
Clearance at Max Lift and Dump	8 ft (2 m)
Dump angle	42 degrees
Dump Height	8 ft (2 m)
Dump reach	34 in (87 cm)
Height - Top of Cab	7 ft (2 m)
Height to Hinge Pin	125 in (318 cm)
Length - with Bucket	12 ft (4 m)
Length - without Bucket	9 ft (3 m)
Overall height	7 ft (2 m)
Overall length (L/bucket)	10 ft (3 m)
Overall length (W/bucket)	12 ft (4 m)
Reach at Max Lift and Dump	3 ft (1 m)
Turning Radius	6 ft (2 m)
Turning Radius from Center - inc bucket	69 in (176 cm)
Turning Radius from Center - machine rear	69 in (176 cm)
Turning radius front L/bucket	5 ft (1 m)
Turning radius front W/bucket	8 ft (2 m)
Wheelbase	6 ft (2 m)
Width Over Tracks	7 ft (2 m)

Engine

Alternator	342000 amps
Battery	12 - 109 (V - Ah)
Fuel Type	Diesel
Gross horsepower - SAE J1995	74 hp (55 kw)
Max Torque	295 lbs ft (400 nm)
Net Power	84 hp (63 kw)
Number of Cylinders	4
Peak Torque	267 lbs ft (362 nm)
Power Measured @	2200 rpm
Starter	6 hp (4 kw)
Torque Measured @	1800 rpm

Hydraulic System

Pump Flow	23 gpm (87 lpm)
Relief Valve Pressure	3335 psi

Loader

Bucket Capacity	1 cu yd (1 cu m)
Bucket Width	78 in (198 cm)
High flow pump output	33 gpm (125 lpm)
Operating Load	2,600 lbs (1,179 kg)
Operating Load Rating	2,797 lbs (1,269 kg)
Operating Width	78 in (198 cm)
Standard hydraulic pump output	24 gpm (90 lpm)
System pressure	3335 psi
Tipping Angle	7991 degrees

Operating Specifications

Alternator Supplied Amperage	95 amps
Cooling System Fluid Capacity	4 gal (16 l)
Engine Oil Capacity	4 gal (15 l)
Fuel Capacity	27 gal (103 l)
Hydraulic System Fluid Capacity	16 gal (60 l)
Max Speed - high range	8 mph (13 kph)
Max Speed - low range	6 mph (9 kph)
Operating Voltage	12 volts
Operating Weight	10,205 lbs (4,629 kg)

Performance

Curl	1.4 seconds
Dump	1.8 seconds
Lift arm path	Vertical
Lower (power down)	3.5 seconds
Raise (lifting)	5.1 seconds
Rated operating load, 35% tip	2,599 lbs (1,179 kg)

Speeds

Single speed

6 mph (9 kph)

Undercarriage

Width of Track

18 in (45 cm)

Weights

Weight

10,756 lbs (4,879 kg)

See all of the Volvo MCT125Cs we have listed for sale.

A 2017 Volvo MCT125C From W.I. Clark Company for $49,500.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon