All Equipment Category Specs ↠ Forklifts ↠ Hyster A30XNT

Hyster A30XNT Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: A30XNT (See all Hyster A30XNT for sale)

Dimensions

Front Tread Range	33 in (84 cm)
Gradeability	22.4%
Ground Clearance	4 in (9 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	6 ft (2 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	3 ft (1 m)
Rear Tread Range	35 in (90 cm)
Right Angle Stack	10 ft (3 m)
Turning Radius	5 ft (1 m)
Wheelbase	4 ft (1 m)

Engine

Engine Make	Hyster
Engine Model	A30XNT

MAST

Lift Speed	101 ft/min (31 m/min)
Load Capacity	3,001 lbs (1,361 kg)
Load Center	24 in (61 cm)
Lower Speed	91 ft/min (28 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees
Max Fork Spread	113 in (286 cm)

Operating Specifications

Axle load - front	2,783 lbs (1,262 kg)
Axle load - rear	3,663 lbs (1,662 kg)
Drawbar Pull	1,403 lbs (636 kg)
Front Tire Size	18 x 7-8
Max Speed	8 mph (13 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	4,830 lbs (2,191 kg)
Rear Tire Size	18 x 7-8
Tire Type	Pneumatic Shaped Solid

See all of the Hyster A30XNTs we have listed for sale.

A Hyster A30XNT From Bohl Equipment Co. for Call for Price

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon