Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Tip Angle - Front | 40 degrees |
Blade Tip Angle - Rear | 5 degrees |
Diameter | 60 in (153 cm) |
Max Lift Above Ground | 19 in (48 cm) |
Max Reach Outside Tires - Left | 75 in (189 cm) |
Max Reach Outside Tires - Right | 78 in (198 cm) |
Shift Left | 27 in (70 cm) |
Shift Right | 29 in (73 cm) |
Front Ground Clearance | 2 ft (1 m) |
Height to Top of Isomount Cab | 10 ft (3 m) |
Rear Ground Clearance | 1 ft (0 m) |
Tandem Axle Wheelbase | 5 ft (2 m) |
Width Over Tires | 8 ft (2 m) |
Max Power | 185 hp (138 kw) |
Net Power Gear 1-2 | 165 hp (123 kw) |
Net Power Gear 5-6 | 185 hp (138 kw) |
Net Power Gears 7-8 | 185 hp (138 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2000 rpm |
Ground Clearance | 2 ft (1 m) |
Oscillation - Total | 32 degrees |
Wheel Lean | 18 degrees |
Pump Type | axial piston |
Relief Valve Pressure | 3500 psi |
Blade Down Pressure | 28,698 lbs (13,017 kg) |
Blade Pull at Max Weight | 42,184 lbs (19,134 kg) |
Max Depth of Cut | 28 in (71 cm) |
Moldboard Thickness | 1 in (2 cm) |
Side Shift Left | 21 in (52 cm) |
Side Shift Right | 26 in (66 cm) |
Alternator Supplied Amperage | 50 amps |
Circle Gearbox Fluid Capacity | 2 gal (7 l) |
Cooling System Fluid Capacity | 10 gal (38 l) |
Max Operation Weight - Front Axle | 16,733 lbs (7,590 kg) |
Max Operation Weight - Rear Axle | 30,139 lbs (13,671 kg) |
Max Operation Weight - Total | 46,872 lbs (21,261 kg) |
Operating Voltage | 24 volts |
Rear Diff/Final Drive Fluid Capacity | 12 gal (47 l) |
Std Operation Weight - Front Axle | 9,123 lbs (4,138 kg) |
Std Operation Weight - Rear Axle | 23,234 lbs (10,539 kg) |
Tandem Case Fluid Capacity (each) | 17 gal (64 l) |
Tire Size | 14-24 10PR (G-2) |
Articulation Angle | 20 degrees |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 6 |
Transmission Type | direct drive, power shift |