Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Tip Angle - Front | 45 degrees |
Blade Tip Angle - Rear | 6.5 degrees |
Max Reach Outside Tires - Left | 120 in (305 cm) |
Max Reach Outside Tires - Right | 119.5 in (304 cm) |
Rotation | 360 degrees |
Shift Left | 30.5 in (77 cm) |
Shift Right | 29.5 in (75 cm) |
Blade Base | 8.6 ft (3 m) |
Height to Top of Isomount Cab | 10.2 ft (3 m) |
Overall Length | 27.9 ft (9 m) |
Wheelbase | 20 ft (6 m) |
Width Over Tires | 8.4 ft (3 m) |
Aspiration | turbocharged |
Displacement | 504.7 cu in (0 cu m) |
Engine Model | 6C8.3 |
Max Power | 160 hp (119 kw) |
Net Power Gears 7-8 | 160 hp (119 kw) |
Net Torque Gears 7-8 | 560 lbs ft |
Number of Cylinders | 6 |
Ground Clearance | 2 ft (1 m) |
Oscillation - Total | 16 degrees |
Wheel Lean | 18 degrees |
Pump Flow | 50.5 gpm (191 lpm) |
Pump Type | load sensing hydraulic |
Relief Valve Pressure | 2500 psi |
Blade Down Pressure | 16717 lbs (7,583 kg) |
Blade Pull at Max Weight | 7853 lbs (3,562 kg) |
Max Depth of Cut | 17.5 in (44 cm) |
Moldboard Height | 25 in (64 cm) |
Moldboard Thickness | 0.9 in (2 cm) |
Moldboard Width | 12 ft (4 m) |
Side Shift Left | 26.5 in (67 cm) |
Side Shift Right | 26.5 in (67 cm) |
Cooling System Fluid Capacity | 12.5 gal (47 l) |
Fuel Capacity | 102.4 gal (388 l) |
Hydraulic System Fluid Capacity | 23.8 gal (90 l) |
Operating Voltage | 24 volts |
Rear Diff/Final Drive Fluid Capacity | 6.1 gal (23 l) |
Std Operation Weight - Front Axle | 9614.4 lbs (4,361 kg) |
Std Operation Weight - Rear Axle | 22961.2 lbs (10,415 kg) |
Std Operation Weight - Total | 32571.1 lbs (14,774 kg) |
Tandem Case Fluid Capacity (each) | 26.5 gal (100 l) |
Transmission Fluid Capacity | 10.1 gal (38 l) |
Articulation Angle | 72 degrees |
Turning Radius | 25.5 ft (8 m) |
Max Speed - Forward | 28.4 mph (46 kph) |
Max Speed - Reverse | 20.4 mph (33 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 4 |
Transmission Type | Volvo 8400 |