Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Body | 28,814 lbs (13,070 kg) |
Body Lower Time - Float | 12.5 seconds |
Body Power Down - High Idle | 31 degrees |
Body Raise Time - High Idle | 9.5 seconds |
Pump Flow - High Idle | 148 gpm (560 lpm) |
Relief Valve Setting - Raise | 2750 psi |
Brake Surface - Rear | 9,496 cu in (155,612 cu cm) |
Standards | 3.64:1 |
Centerline Front Tire Width | 11 ft (3 m) |
Dump Ground Clearance | 2 ft (1 m) |
Dump Height | 29 ft (9 m) |
Front Canopy Height | 15 ft (4 m) |
Ground Clearance | 2 ft (1 m) |
Inside Body Length | 22 ft (7 m) |
Loading Height - Empty | 13 ft (4 m) |
Operating Width | 17 ft (5 m) |
Overall Height | 15 ft (4 m) |
Overall Height - Body Raised | 29 ft (9 m) |
Overall Length | 30 ft (9 m) |
Overall Width | 15 ft (4 m) |
Wheel Base | 14 ft (4 m) |
Wheelbase | 14 ft (4 m) |
Load Capacity - heaped | 54 cu yd (42 cu m) |
Load Capacity - Struck | 41 cu yd (31 cu m) |
Bore | 5 in (14 cm) |
Displacement | 1,649 cu in (27,022 cu cm) |
Engine Model | Cat 3412E |
Flywheel Power | 730 hp (544 kw) |
Gross Power | 760 hp (567 kw) |
Gross Power - SAE J1995 | 760 hp (567 kw) |
Max Torque | 2,542 lbs ft (3,447 nm) |
Net Power | 730 hp (544 kw) |
Net Power - 80/1269/EEC | 730 hp (544 kw) |
Net Power - Cat | 730 hp (544 kw) |
Net Power - ISO 9249 | 730 hp (544 kw) |
Net Power - SAE J1349 | 730 hp (544 kw) |
Number of Cylinders | 12 |
Power Measured @ | 2000 rpm |
Stroke | 6 in (15 cm) |
Torque Rise | 33% |
Planetary Ratio | 4.80:1 |
Total Reduction Ratio | 17.48:1 |
Body Capacity - SAE 2:1 | 54 cu yd (42 cu m) |
Body Capacity - Struck | 41 cu yd (31 cu m) |
Brake/Hoist System Fluid Capacity | 81 gal (307 l) |
Cooling System Fluid Capacity | 40 gal (151 l) |
Diff and Final Drive Fluid Capacity | 41 gal (155 l) |
Engine Oil Capacity | 18 gal (68 l) |
Fuel Capacity | 185 gal (700 l) |
Maximum Capacity | 140,000 lbs (63,503 kg) |
Nominal Payload Capacity | 41 lbs (19 kg) |
Nominal Payload Class (100%) | 140,000 lbs (63,503 kg) |
Steer Angle | 31 degrees |
Steering System Fluid Capacity | 16 gal (61 l) |
Tire Size | 24.00-R35 (E4) |
Top Speed - Loaded | 41 mph (66 kph) |
ROPS Standards | Meets SAE J88 APR95 |
Brake Hoist System - Includes Tank | 81 gal (307 l) |
Brake/Hoist Hydraulic Tank | 136,488 gal (516,608 l) |
Cooling System | 40 gal (151 l) |
Differential - Final Drives | 41 gal (155 l) |
Fuel Tank | 185 gal (700 l) |
Steering System - Including Tank | 16 gal (61 l) |
Steering Tank | 9 gal (34 l) |
Torque Converter - Brake - Hoist Hydraulic Tank | 35 gal (132 l) |
Torque Converter - Transmission System - Including Sump | 19 gal (72 l) |
Sound Standards | Meets SAE J88 APR95 |
Steering Standards | Meets SAE J1511 FEB94 and ISO 5010:1992 |
Standard Tire | Standard: 24.00-R35 (E4) |
Standard Tires | 216 |
Forward - 1 | 6 mph (10 kph) |
Forward - 2 | 9 mph (14 kph) |
Forward - 3 | 12 mph (19 kph) |
Forward - 4 | 16 mph (25 kph) |
Forward - 5 | 21 mph (34 kph) |
Forward - 6 | 29 mph (46 kph) |
Forward - 7 | 41 mph (66 kph) |
Max Speed | 41 mph (66 kph) |
Number of Gears - Forward | 7 |
Number of Gears - Reverse | 1 |
Reverse | 8 mph (12 kph) |
Empty Weight | 67,000 lbs (30,391 kg) |
Front Axle - Empty | 44.3% |
Front Axle - Loaded | 31.2% |
Loaded Weight | 239,000 lbs (108,409 kg) |
Operating Weight - Loaded | Meets SAE J1511 FEB94 and ISO 5010:1992 lbs |
Rear Axle - Empty | 55.7% |
Rear Axle - Loaded | 68.8% |
Weight Distribution Front - empty | 44.3% |
Weight Distribution Front - loaded | 31.2% |
Weight Distribution Rear - empty | 55.7% |
Weight Distribution Rear - loaded | 68.8% |