All Equipment Category Specs ↠ Scrapers ↠ Caterpillar 613C Series II

Caterpillar 613C Series II Scraper

Category: Scrapers (See all Scrapers for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 613C Series II (See all Caterpillar 613C Series II for sale)

Bowl

Heaped Capacity	11 cu yd (8 cu m)
Struck Capacity	9 cu yd (7 cu m)
Width of Cut	8 ft (2 m)

Dimensions

Front of Tractor to Front Axle	98 in (250 cm)
Height - Overall Shipping	122 in (310 cm)
Height - Scraper Blade Maximum	23 in (57 cm)
Height to Top of Suspended Cab	10 ft (3 m)
Length - Overall Machine	399 in (1,013 cm)
Overall Height	10 ft (3 m)
Rear Axle - Rear of Machine	48 in (123 cm)
Tractor Ground Clearance	2 ft (1 m)
Wheel Base	21 ft (6 m)
Wheelbase	21 ft (6 m)
Width - Outside Rear Tires	96 in (244 cm)
Width - Overall Machine	96 in (244 cm)
Width - Rear Tire Center Lines	71 in (180 cm)

Elevator

Length - Flights	66 in (168 cm)
Length - Overall	96 in (244 cm)
Length of Flights	6 ft (2 m)
Max Working Speed	279 ft/min (85 m/min)
Number of Flights	15
Spacing of Flights	16 in (41 cm)
Width - Flight Face	7 in (18 cm)
Width of Flight Face	7 in (17 cm)

Engine

Bore	4 in (11 cm)
Displacement	403 cu in (6,604 cu cm)
Flywheel Power - Tractor/Scraper	131 kW (175)
Gross Power - Gears 1-2	187 hp (139 kw)
Net Power	175 hp (130 kw)
Net Power - Gears 1-2	175 hp (130 kw)
Net Power - Gears 3-8	175 hp (130 kw)
Stroke	5 in (13 cm)
Tractor Engine	Cat 3116

Hydraulic System

Bowl Cylinder Bore	4 in (10 cm)
Bowl Cylinder Stroke	17 in (42 cm)
Ejector Cylinder Bore	4 in (9 cm)
Ejector Cylinder Stroke	36 in (91 cm)
Scraper Circuit	27 gpm (102 lpm)
Steering Circuit	22 gpm (83 lpm)

Operating Specifications

Alternator Supplied Amperage	50 amps
Cooling System Fluid Capacity	10 gal (39 l)
Engine Oil Capacity	5 gal (20 l)
Engine Oil Fluid Capacity	5 gal (20 l)
Operating Voltage	24 volts
Tire Size	23.5R25
Wheel Coolant Fluid Capacity - each	2 gal (6 l)

Scraper Bowl

Capacity - Struck	9 cu yd (7 cu m)
Depth of Cut - Maximum	6 in (16 cm)
Depth of Spread - Maximum	15 in (37 cm)
Ground Clearance - Maximum	18 in (45 cm)
Rated Load	26,400 lbs (11,975 kg)
Scraper Capacity - Heaped	11 cu yd (8 cu m)
Width - Cut - To Router Bits	8 in (20 cm)

Scraper Engine

Displacement

403 cu in (6,601 cu cm)

Service Refill Capacities

Cooling System	10 gal (39 l)
Crankcase	5 gal (20 l)
Differential	5 gal (19 l)
Final Drive - Each	2 gal (6 l)
Fuel Tank	66 gal (250 l)
Hydraulic Reservoir	26 gal (100 l)
Transmission	9 gal (35 l)

Tractor Engine

Aspiration	turbocharged
Displacement	403 cu in (6,604 cu cm)
Gross Power	187 hp (139 kw)
Make	Caterpillar
Net Power	175 hp (130 kw)
Power Measured @	2300 rpm

Transmission

1 Forward	2 mph (4 kph)
2 Forward	4 mph (6 kph)
3 Forward	6 mph (9 kph)
4 Forward	9 mph (14 kph)
5 Forward	15 mph (24 kph)
6 Forward	22 mph (35 kph)
Max Speed Reverse	2 mph (4 kph)
Number of Forward Gears	6
Number of Reverse Gears	1
Reverse	2 mph (3 kph)
Top Speed - Loaded	22 mph (35 kph)
Transmission Type	powershift, manual transmission

Weights

Front Axle	21,100 lbs (9,571 kg)
Front Axle Weight - Loaded	29,438 lbs (13,353 kg)
Rear Axle	12,550 lbs (5,693 kg)
Rear Axle - Weight - Loaded	30,612 lbs (13,885 kg)
Total Operating - Loaded	60,050 lbs (27,238 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon