All Equipment Category Specs ↠ Scrapers ↠ Caterpillar 627G

Caterpillar 627G Scraper

Category: Scrapers (See all Scrapers for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 627G (See all Caterpillar 627G for sale)

Bowl

Heaped Capacity	22 cu yd (17 cu m)
Max Depth of Cut	13 in (33 cm)
Rated Payload	52,800 lbs (23,950 kg)
Struck Capacity	16 cu yd (12 cu m)
Width of Cut	10 ft (3 m)

Dimensions

Axle to Vertical Hitch Pin	17 in (43 cm)
Bail Length - Maximum (Push-Pull)	64 in (161 cm)
Extended Push Block (Push-Pull)	110 in (279 cm)
Front of Tractor to Front Axle	120 in (306 cm)
Ground Clearance - Tractor	22 in (55 cm)
Height - Overall Shipping	146 in (371 cm)
Height - Scraper Blade Maximum	21 in (52 cm)
Height - Top of Cab	11 ft (3 m)
Length - Overall Machine	509 in (1,292 cm)
Overall Height	12 ft (4 m)
Overall Length	42 ft (13 m)
Overall Width	11 ft (3 m)
Rear Axle - Rear of Machine	84 in (214 cm)
Rim Radius	17 in (43 cm)
Tractor Ground Clearance	2 ft (1 m)
Wheel Base	25 ft (8 m)
Wheelbase	25 ft (8 m)
Width - Inside of Bowl	116 in (295 cm)
Width - Outside Rear Tires	120 in (305 cm)
Width - Overall Machine	137 in (347 cm)
Width - Rear Tire Center Lines	86 in (218 cm)
Width - Tractor	123 in (313 cm)

Engine

Scraper Engine	Cat C9 ACERT
Tractor Engine	Cat C15 ACERT

Hydraulic System

Apron Cylinder Bore	7 in (19 cm)
Apron Cylinder Stroke	24 in (60 cm)
Bowl Cylinder Bore	6 in (15 cm)
Bowl Cylinder Stroke	32 in (81 cm)
Cushion Hitch Circuit	10 gpm (37 lpm)
Ejector Cylinder Bore	7 in (17 cm)
Ejector Cylinder Stroke	61 in (155 cm)
Relief Valve - Implement Circuit	2175 psi
Relief Valve - Steering Circuit	2250 psi
Scraper Circuit	66 gpm (248 lpm)
Secondary Steering Circuit	40 gpm (151 lpm)
Steering Circuit	55 gpm (208 lpm)

Operating Specifications

Alternator Supplied Amperage	75 amps
Cooling System Fluid Capacity	48 gal (183 l)
Differential Fluid Capacity	42 gal (159 l)
Engine Oil Fluid Capacity	17 gal (62 l)
Fuel Capacity	292 gal (1,105 l)
Hydraulic System Fluid Capacity	37 gal (140 l)
Operating Voltage	24 volts
Tire Size	33.25-R29
Transmission Fluid Capacity	35 gal (131 l)
Wheel Coolant Fluid Capacity - each	24 gal (91 l)

Scraper Bowl

Apron Closure Force	24,075 lbs (10,920 kg)
Apron Opening	70 in (178 cm)
Capacity - Struck	16 cu yd (12 cu m)
Capacity Heaped	22 cu yd (17 cu m)
Cutting Edge Thickness	1 in (2 cm)
Depth of Cut - Maximum	13 in (33 cm)
Depth of Spread - Maximum	21 in (52 cm)
Ground Clearance - Maximum	21 in (52 cm)
Rated Load	52,800 lbs (23,950 kg)
Width - Cut - To Router Bits	119 in (302 cm)

Scraper Engine

Bore	5 in (11 cm)
Displacement	538 cu in (8,816 cu cm)
Gross Power	286 hp (213 kw)
Gross Power - Gear 1	258 hp (192 kw)
Make	Caterpillar
Model	C9 ACERT
Net Power	266 hp (198 kw)
Net Power - Gear 1	239 hp (178 kw)
Stroke	6 in (15 cm)

Service Refill Capacities - Scraper

Cooling System	20 gal (77 l)
Differential	4 gal (15 l)
Final Drive - Each	5 gal (19 l)
Transmission	16 gal (59 l)
Wheel Coolant - Each	12 gal (45 l)

Service Refill Capacities - Tractor

Cooling System	28 gal (106 l)
Crankcase	10 gal (36 l)
Differential	38 gal (144 l)
Final Drive - Each	5 gal (19 l)
Hydraulic Reservoir	37 gal (140 l)
Transmission	19 gal (72 l)
Wheel Coolant - Each	12 gal (45 l)
Windshield Washer	2 gal (6 l)

Steering System

Hydraulic Output	55 gpm (208 lpm)
Steering Angle - Left	85 degrees
Steering Angle - Right	90 degrees
Width - 180 degrees Turn	36 ft (11 m)

Tractor Engine

Bore	6 in (14 cm)
Displacement	928 cu in (15,207 cu cm)
Gross Power	394 hp (294 kw)
Gross Power - Gears 3-8	394 hp (294 kw)
Make	Caterpillar
Model	C15 ACERT
Net Power	365 hp (272 kw)
Net Power - Gears 1-2	330 hp (246 kw)
Net Power - Gears 3-8	365 hp (272 kw)
Net Power - Tractor/Scraper	246 kW (330) / 178 kW (239)
Stroke	7 in (17 cm)

Transmission

1 Forward	3 mph (5 kph)
2 Forward	5 mph (8 kph)
3 Forward	7 mph (11 kph)
4 Forward	9 mph (15 kph)
5 Forward	12 mph (20 kph)
6 Forward	17 mph (27 kph)
7 Forward	23 mph (36 kph)
8 Forward	32 mph (51 kph)
Max Speed Forward	32 mph (51 kph)
Max Speed Reverse	6 mph (9 kph)
Number of Forward Gears	8
Number of Reverse Gears	1
Reverse	6 mph (9 kph)
Transmission Type	powershift
Travel Speed - Maximum	32 mph (51 kph)

Weights

Front Axel - loaded	68,405 lbs (31,028 kg)
Front Axle - empty	52,080 lbs (23,623 kg)
Operating Weight	136,905 lbs (62,099 kg)
Rear Axle - empty	34,720 lbs (15,749 kg)
Rear Axle - loaded	71,197 lbs (32,294 kg)
Total Operating - empty	86,800 lbs (39,372 kg)
Total Operating - Loaded	139,601 lbs (63,322 kg)

Weights - Push-Pull

Front Axle	52,080 lbs (23,623 kg)
Front Axle - Loaded	68,405 lbs (31,028 kg)
Rear Axle	34,720 lbs (15,749 kg)
Rear Axle - Loaded	71,197 lbs (32,294 kg)
Scraper Shipping	33,335 lbs (15,121 kg)
Total Operating - Empty	86,800 lbs (39,372 kg)
Total Operating - Loaded	139,601 lbs (63,322 kg)
Total Shipping	85,473 lbs (38,770 kg)
Tractor Shipping	52,139 lbs (23,650 kg)

Weights - Standard, Tandem

Front Axle	49,230 lbs (22,330 kg)
Front Axle Weight - Loaded	65,396 lbs (29,663 kg)
Rear Axle	34,211 lbs (15,518 kg)
Rear Axle - Weight - Loaded	70,845 lbs (32,135 kg)
Scraper Shipping	33,666 lbs (15,271 kg)
Total Operating - Empty	83,441 lbs (37,848 kg)
Total Operating - Loaded	136,241 lbs (61,798 kg)
Total Shipping	82,113 lbs (37,246 kg)
Tractor Shipping	48,447 lbs (21,975 kg)

See all of the Caterpillar 627Gs we have listed for sale.

A 2001 Caterpillar 627G From Headwater Equipment for $325,000.00 USD

A 2005 Caterpillar 627G From Torgerson Machinery for $299,500.00 USD

A Caterpillar 627G From NMC CAT for $175,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon