All Equipment Category Specs ↠ Scrapers ↠ Caterpillar 633E II

Caterpillar 633E II Scraper

Category: Scrapers (See all Scrapers for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 633E II (See all Caterpillar 633E II for sale)

Bowl

Heaped Capacity	34 cu yd (26 cu m)
Max Depth of Cut	24 in (61 cm)
Rated Payload	82,012 lbs (37,200 kg)
Struck Capacity	23 cu yd (18 cu m)
Width of Cut	12 ft (4 m)

Dimensions

Front of Tractor to Front Axle	132 in (336 cm)
Height - Overall Shipping	167 in (424 cm)
Height - Scraper Blade Maximum	18 in (45 cm)
Height - Top of Cab	12 ft (4 m)
Length - Overall Machine	583 in (1,481 cm)
Overall Height	14 ft (4 m)
Overall Length	49 ft (15 m)
Overall Width	13 ft (4 m)
Rear Axle - Rear of Machine	96 in (243 cm)
Wheel Base	30 ft (9 m)
Wheelbase	30 ft (9 m)
Width - Inside of Bowl	134 in (340 cm)
Width - Outside Rear Tires	143 in (364 cm)
Width - Overall Machine	160 in (405 cm)
Width - Rear Tire Center Lines	97 in (246 cm)
Width - Tractor	137 in (348 cm)

Elevator

Length - Flights	114 in (289 cm)
Length - Overall	177 in (450 cm)
Number of Flights	14
Spacing of Flights	24 in (61 cm)
Width - Flight Face	10 in (25 cm)

Engine

Bore	5 in (14 cm)
Displacement	1,099 cu in (18,009 cu cm)
Gross Power - Gears 1-2	475 hp (354 kw)
Net Power	490 hp (365 kw)
Net Power - Gears 1-2	450 hp (336 kw)
Net Power - Gears 3-8	490 hp (365 kw)
Stroke	6 in (15 cm)
Tractor Engine	3408E

Hydraulic System

Bowl Cylinder Bore	7 in (19 cm)
Bowl Cylinder Stroke	20 in (51 cm)
Compensator Settings - Cushion Hitch Circuit	2300 psi
Compensator Settings - Elevator Circuit	5300 psi
Cushion Hitch Circuit	9 gpm (34 lpm)
Ejector Cylinder Bore	7 in (17 cm)
Ejector Cylinder Stroke	61 in (155 cm)
Floor Cylinder Bore	6 in (16 cm)
Floor Cylinder Stroke	52 in (133 cm)
Relief Valve - Implement Circuit	2500 psi
Relief Valve - Steering Circuit	1960 psi
Scraper Circuit	91 gpm (344 lpm)
Steering Circuit	103 gpm (390 lpm)
Supplemental Steering Circuit	77 gpm (291 lpm)

Scraper Bowl

Capacity - Struck	23 cu yd (18 cu m)
Cutting Edge Thickness	1 in (4 cm)
Depth of Cut - Maximum	17 in (43 cm)
Depth of Spread - Maximum	23 in (58 cm)
Ground Clearance - Maximum	20 in (50 cm)
Hydraulic Penetration Force	87,608 lbs (39,738 kg)
Rated Load	82,000 lbs (37,195 kg)
Scraper Capacity - Heaped	34 cu yd (26 cu m)
Width - Cut - To Router Bits	12 in (29 cm)

Scraper Engine

Displacement

49,673 cu in (814,003 cu cm)

Service Refill Capacities

Cooling System	33 gal (125 l)
Crankcase	12 gal (44 l)
Differential	36 gal (136 l)
Final Drive - Each	7 gal (26 l)
Fuel Tank	215 gal (814 l)
Hydraulic Reservoir	50 gal (189 l)
Transmission	33 gal (125 l)
Wheel Coolant - Each	20 gal (74 l)

Steering System

Ground-Driven Secondary Steering System	52 gpm (197 lpm)
Hydraulic Output	96 gpm (364 lpm)
Steering Angle - Left	85 degrees
Steering Angle - Right	90 degrees
Width - 180 degrees Turn	40 ft (12 m)

Tractor Engine

Displacement	1,099 cu in (18,001 cu cm)
Gross Power	490 hp (365 kw)
Model	3408TA
Net Power	450 hp (336 kw)

Transmission

1 Forward	3 mph (5 kph)
2 Forward	5 mph (9 kph)
3 Forward	7 mph (12 kph)
4 Forward	10 mph (16 kph)
5 Forward	14 mph (22 kph)
6 Forward	18 mph (29 kph)
7 Forward	25 mph (40 kph)
8 Forward	33 mph (54 kph)
Max Speed Forward	33 mph (53 kph)
Reverse	6 mph (10 kph)

Weights

Front Axle	72,051 lbs (32,682 kg)
Front Axle Weight - Loaded	99,236 lbs (45,013 kg)
Rear Axle	40,529 lbs (18,384 kg)
Rear Axle - Weight - Loaded	95,344 lbs (43,247 kg)
Scraper Shipping	64,958 lbs (29,464 kg)
Total Shipping	111,158 lbs (50,420 kg)
Tractor Shipping	46,200 lbs (20,956 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon