All Equipment Category Specs ↠ Skid Steer Loaders ↠ Case SR220

Case SR220 Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Case (See all Case Equipment for sale)
Model: SR220 (See all Case SR220 for sale)

Dimensions

Clearance at Max Lift and Dump	9 ft (3 m)
Ground Clearance	8 in (20 cm)
Height - Top of Cab	7 ft (2 m)
Length w/o Bucket	10 ft (3 m)
Length with Bucket	12 ft (4 m)
Reach at Max Lift and Dump	20 in (50 cm)
Turning Radius from Center - inc bucket	84 in (214 cm)
Turning Radius from Center - machine rear	70 in (179 cm)
Wheelbase	4 ft (1 m)
Width Over Tires	6 ft (2 m)

Engine

Aspiration	Turbocharged
Displacement	195 cu in (3,195 cu cm)
Engine Model	432T/M3
Gross Power	76 hp (57 kw)
Max Torque	225 lbs ft (305 nm)
Number of Cylinders	4
Power Measured @	2500 rpm
Torque Measured @	1400 rpm

Hydraulic System

Pump Flow Capacity	12 gpm (46 lpm)
Pump Type	Gear
Relief Valve Pressure	3000 psi

Loader

Bucket Capacity	1 cu yd (1 cu m)
Bucket Width	72 in (183 cm)
Operating Load Rating	2,200 lbs (998 kg)
Operating Width	70 in (179 cm)
Tipping Angle	4400 degrees

Operating Specifications

Alternator Supplied Amperage	95 amps
Chain Box Fluid Capacity - each side	2 gal (8 l)
Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	26 gal (97 l)
Hydraulic System Fluid Capacity	6 gal (23 l)
Max Speed	12 mph (19 kph)
Operating Speed	7 mph (12 kph)
Operating Voltage	12 volts
Operational Weight	7,400 lbs (3,357 kg)
Tire Size	12 x 16.5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon