All Equipment Category Specs ↠ Skid Steer Loaders ↠ Case SV250

Case SV250 Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Case (See all Case Equipment for sale)
Model: SV250 (See all Case SV250 for sale)

Dimensions

Clearance at Max Lift and Dump	8.6 ft (3 m)
Ground Clearance	8 in (20 cm)
Height - Top of Cab	6.6 ft (2 m)
Length w/o Bucket	9.9 ft (3 m)
Length with Bucket	11.9 ft (4 m)
Reach at Max Lift and Dump	29.3 in (74 cm)
Turning Radius from Center - inc bucket	83.8 in (213 cm)
Turning Radius from Center - machine rear	70.4 in (179 cm)
Wheelbase	4.3 ft (1 m)
Width Over Tires	5.6 ft (2 m)

Engine

Aspiration	Turbocharged
Displacement	195 cu in (0 cu m)
Engine Model	432T/M3
Gross Power	76 hp (57 kw)
Max Torque	225 lbs ft
Number of Cylinders	4
Power Measured @	2500 rpm
Torque Measured @	1400 rpm

Hydraulic System

Pump Flow Capacity	12.2 gpm (46 lpm)
Pump Type	Gear
Relief Valve Pressure	3000 psi

Loader

Bucket Capacity	0.7 cu yd (1 cu m)
Bucket Width	72 in (183 cm)
Operating Load Rating	2500 lbs (1,134 kg)
Operating Width	69.6 in (177 cm)
Tipping Angle	5000 degrees

Operating Specifications

Alternator Supplied Amperage	95 amps
Chain Box Fluid Capacity - each side	2 gal (8 l)
Engine Oil Fluid Capacity	2.7 gal (10 l)
Fuel Capacity	25.5 gal (97 l)
Hydraulic System Fluid Capacity	6.1 gal (23 l)
Max Speed	11.9 mph (19 kph)
Operating Speed	7.2 mph (12 kph)
Operating Voltage	12 volts
Operational Weight	8000 lbs (3,629 kg)
Tire Size	12 x 16.5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon