All Equipment Category Specs ↠ Skid Steer Loaders ↠ Caterpillar 236

Caterpillar 236 Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 236 (See all Caterpillar 236 for sale)

Cab

FOPS	SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level II	SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
ROPS	SAE J1040 MAY94 and ISO3471:1994

Dimensions

Bucket Pin Height - Carry Position	10 in (25 cm)
Bucket Pin Height - Maximum Lift	10 ft (3 m)
Bumper Overhang - Rear Axle	41 in (104 cm)
Clearance at Max Lift and Dump	8 ft (2 m)
Clearance at Maximum Lift and Dump	94 in (239 cm)
Ground Clearance	9 in (23 cm)
Height - Top of Cab	7 ft (2 m)
Length - With Bucket on Ground	138 in (351 cm)
Length - Without Bucket	110 in (279 cm)
Length w/o Bucket	9 ft (3 m)
Length with Bucket	12 ft (4 m)
Maximum Overall Height	156 in (396 cm)
Reach - Maximum Lift/Dump	21 in (53 cm)
Reach at Max Lift and Dump	23 in (59 cm)
Turning Radius from Center - inc bucket	85 in (217 cm)
Vehicle Width over Tires	66 in (168 cm)
Wheel Base	4 ft (1 m)
Wheelbase	4 ft (1 m)
Width Over Tires	6 ft (2 m)

Engine

Bore	4 in (10 cm)
Displacement	183 cu in (2,999 cu cm)
Engine Make	Caterpillar
Engine Model	Cat 3034C
Net Flywheel Power	44 hp (33 kw)
Number of Cylinders	4
Power Measured @	2600 rpm
Stroke	4 in (10 cm)

Hydraulic System

Hydraulic Flow	Standard flow
Loader Hydraulic Flow	22 gpm (83 lpm)
Loader Hydraulic Pressure	3300 psi
Pump Flow Capacity	22 gpm (83 lpm)

Loader

Bucket Capacity	1 cu yd (0 cu m)
Operating Load Rating	1,750 lbs (794 kg)
Tipping Angle	3440 degrees

Operating Specifications

Breakout Force - Lift Cylinder	4,344 lbs (1,970 kg)
Breakout Force - Tilt Cylinder	5,255 lbs (2,384 kg)
Fuel Capacity	24 gal (90 l)
Hydraulic System Fluid Capacity	14 gal (52 l)
Max Speed	7 mph (11 kph)
Operating Speed	8 mph (12 kph)
Operational Weight	7,030 lbs (3,189 kg)
Rated Operating Capacity	1,750 lbs (794 kg)
Rated Operating Capacity with Optional Counterweight	1,850 lbs (839 kg)
Tipping Load	3,500 lbs (1,588 kg)

Service Refill Capacities

Chain Box - Each Side	2 gal (8 l)
Cooling System	3 gal (10 l)
Engine Crankcase	2 gal (7 l)
Fuel Tank	24 gal (90 l)
Hydraulic System	14 gal (52 l)
Hydraulic Tank	9 gal (35 l)

Weights

Operating Weight

6,810 lbs (3,089 kg)

See all of the Caterpillar 236s we have listed for sale.

A Caterpillar 236 From H.O. Penn Machinery for $25,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon